Projects 36 ford custom build (MISS SCARLET)

I spent some time this morning and finished replacing the missing pictures. now its time to try and finish sanding the other head so they can be polished. Also a pic.

 

I pulled the rear end back today out so I can put the overdrive in to the torque tube.

1936 Polish 001 by kippers 34 posted Nov 9, 2014 at 6:52 PM

 

Then I finished the polishing on the heads. After polishing one head I decided the other needed more sanding so I spent a few more hours sanding and then polished the other.

1936 Polish 004 by kippers 34 posted Nov 9, 2014 at 6:52 PM

I also sanded and polished the front timing cover.

1936 Polish 005 by kippers 34 posted Nov 9, 2014 at 6:52 PM

 

I also got bolts and brackets back from the chrome.

1936 Polish 002 by kippers 34 posted Nov 9, 2014 at 6:52 PM

The water neck's came out perfect.

1936 Polish 003 by kippers 34 posted Nov 9, 2014 at 6:52 PM

Things are coming togeather piece by piece now back to sanding on the body.

 

Yowza; break out the sungl***es !

 

maddddddd ***xyy!

 

Wow. What a read! I was glad this popped up in my emails. Just re-read the whole thread for about the third time. This has got me fired up to get more work done on mine.

 

Thanks as always. Show us some pics of your progress.

 

Chrome is looking great, that's for sure. Very cool man.

 

I just binged read this thread all morning. Pretty amazing!!

 

Hey Kipp. I can´t wait to see it ***embled.With all that bling she will shine like Marylin Monroe

 

Subscribed

 

You'll get a flood of visitors here now after @Ryan highlighted your thread @kippers 34!
Quite the compliment,

well deserved I might add!

 

Awsome. Subscribed.

 

Thanks.

Thank You. Hop you enjoyed her progress so far.

 

Thanks keneth. If I can quit nit picking tiny little flaws she should be ready for paint very soon. Hope you are getting time to work on your 36.
Later Kipp.

 

Thanks.

Thanks She has been a very fun build so far. The best is yet to come.

Thank you.

 

One of the best and informative buid reads to date.i am building a 41 Chevy and have added many of mods that my friend questions.after reading your build and finishing technicqs I am on track thanks and keep it coming. You are truly a master at what you are doing.

 

Thanks. Good luck on the chevy.

 

After spending all week finishing inner fender lip's, rear inner fender's, etc. I took the trunk lid back off and primed the underside and the lip and trough. The small flaws and areas that will probably never be seen are coming togeather. Hopefully I can finish to the point of being ready for a final light coat of urethane fill this week. Then thanksgiving weekend she can be wet sanded with 320.
Today I finished pulling the driveline and torque tube apart.

36 Drive Line 001 by kippers 34 posted Nov 16, 2014 at 7:06 PM

I had a couple helpers inspecting my work.

36 Drive Line 003 by kippers 34 posted Nov 16, 2014 at 7:06 PM

After sanding the powder off I took the tube and shaft to Brian ( aka Hot Rod Packard ) to machine and install the overdrive in the torque tube. Hopefully I can get the rear end back in before I am ready to set the body back on the frame. If all goes well I should have her in paint before Christmas.

 

Thanks Ryan and Vern for the compliments.

 

sweet, cant wait to see it all done.

 

Holy smoke! What an amazing build kippers 34! I love it. It reminds me a lot about an old Wilmington custom that Howard Gribble just "discovered"; Frank Sandoval's 1936 Ford:



What grille are you using? 1939 Nash?
Narrowed running boards would have been ***s on this one...like Bud Unger did on my all time favorite '36



I look forward to follow this build! What color have you planned for it?

 

Good God.. This is amazing.

 

Man that 36 is too cool for school
I just picked a a 5 window project myself and you've given
Me heaps of inspiration and ideas here Kip
Nice work Man, *****in!!!


Posted using the Full Custom H.A.M.B. App!

 

Looks great Kip. Love all the chrome work. I will have some bike parts coming your way for powder soon.

 

Thanks.

 

Thanks.

Good luck with your 36 they have tons of potential for a custom. Thanks a lot. Kipp.

 

Thanks . You need to stop by and see the progress in person.