Technical i-beam on 33 34 ford coupes - what are you running?

Hey all
I'm trying to figure out the width and drop (or not) to run on my fender-less 34 3wdw.
I'd love to see photos of who is running what and why.
It will be running a 331ci Hemi, without hood sides, probably 40 ford rims - all very Rolling Bones style but with a few modern touches - like discs and cycle guards, to make the local authorities happy and allow me to drag-race it.

 

I use the CE axle with a 47" KP distance and 4" drop. You can use the 5" Magnum or SO-CAL also. I like the CE axle the best. Here are some photos of my roadster. I run a 165 front tire and everything looks right with this axle.


Stock spindles arms will have to be bent to clear axle. SO-CAL's works with stock steering arms.

The Wilson Welding backing plates with Buick drums work perfect with the axle width.

 

Pete and Jakes drilled 4inch I beam, 40 backing plates, Buick drums with Wilson Welding hubs.





As for the local authorities, they can kiss my ass.

-Abone.

 

Cheers - was

Cheers, what width is this one?

 

Have the same question, only car will have fenders. Concerned about tire/fender clearance.