Event Coverage Welcome to the 2017 Meltdown Drags

I gave him some help

 

Are you flying commercial, or private plane? Rockford Airport is a very nice, modern facility and is MUCH, MUCH less congested than anything in Chicago. This is in addition to being about 15 miles from the strip.

http://flyrfd.com/

 

Wrenchbender how's this for starters?
Ric Panneton Special on Pistons...!


Sent from my iPhone using The H.A.M.B. mobile app

 

All that waiting and fighting and it's over in a minute and a half video.... just like**** LOL.

 

I was talking to my wife on the way home and said how funny is this that someone would drive for 4 hours one way for 36.71 seconds of fun.

 

I heard that DuecedUp had to load that Dragnasty on the trailer because when he pulled the chute it got all tangled up on the wheelie bars and almost flipped the car on it's roof? Any truth to that story?

 

Couple more Pics of mock up block & heads... And old 302 ready to get pulled.


Sent from my iPhone using The H.A.M.B. mobile app

 

NOPE! ...but that would certainly be par for the course! However, I was thinking about tossing the chute just for the heck of it. I have always wanted to do it. But the darn 1000 foot cones went by so fast I didn't have a chance! LMAO! Next time!

 

Make sure the leaf spring U bolts are tight, cause this one won't bog down like the last one.

 

That is a trio that will beat a pair.

 

I just pissed my pants! Good stuff.


Sent from my iPhone using The H.A.M.B. mobile app

 

It sure looks like a lot of attention around the little engine that couldn't.

 

H.A.M.B. WHEELS UP CLUB
From MOKAN Dragway! Coming to Track Near You...


wrenchbender - DIGGER

saltflats - 409

Deuced Up! - AUSTIN

 

Whaaa Hooo

Look at the air under there.

 

You know, I noticed several other H.A.M.B. Clubs of interest in attendance as well but they only had one member each, LIKE:
1 - The One Run and Done Club - Deuced Up!
2 - The Smoking Tires Through 1/8 Mile Club - wrenchbender
3 - The Crush the Hopes of a Digger with a Heavy**** Chevy Club - saltflats
4 - The Wheels Up In Second Gear Club - Deuced Up!
5 - The Toss The Chute But It Was TOO Wet To Work Club - wrenchbender
6 - The She's Real Fine My 409 Club - saltflats

 

Just a little save the date for everyone...

 

After a trip to the sandbox last year need some repairs - final pull on the frame all is level and square. new straight axle (hope to keep it straight), master cylinder and while its down - new engine and clutchflite. A bit of work ahead.

 

Graham-

I will never forget that from last year....you went pretty deep into the sand and I am happy that you only walked away with some damage to the car.

We look forward to having you and your Dad come back...love your car and can't wait to see you get back down the track

 

Pretty deep! That was about as deep as you can go without "into" becoming "through", isn't it???

 

Yeah it was...

 

Holy***** man I had no idea you were playing in the sandbox I wondered why you guys were not at the fall hot rod reunion at Mokan now I know why glad you were ok and the car is fixable


Chrome don't get ya home

 

Can't seem to get that brown stain out of the seat. We will be back!
ET

 

Here's a couple more 351/408C engine machining & parts pics... Ron Flood @ Cedar Machine Service in North Branch, MN is doing machining. Mike Bratsch @ Bratsch Cylinder Head in Lakeville, MN is doing****embly of long block.


Sent from my iPhone using The H.A.M.B. mobile app

 

Looks killer
So you got a new clutch?

 

Not missing '17.

 

Show us more Rocketsled!

 

Hey Big Slim - that is one pretty motor!

Panneton must not love you as much as he loves me because he didn't customize your goodies with some handwritten love notes....