History Drag cars in motion.......picture thread.

Same guy cut the fenders on Maz's Corvette.

 

He didn't own any stinking round saws

 

Oops too much gas

 

Hey Rob, (IT IS A SAD THING TO FIND OUT ABOUT AN OLD DRAG RACING FRIEND...)
This past summer, I was in a conversation with Ted and exchanged several bits of information. I have always admired his Willys G***er Pickup. While I was going through my drawings, I found the following Willys Pickup that I had drawn in 1961. It was right during the recovery stage for my brother, after the explosion and fire of our C/Gas Willys Coupe. As noted in the Friday Art Thread back in November of 2016. It was a coincidence that one of the ideas for our next car was going to be an A/Gas 40 Willys Pickup with a 671 SBC.
Here is what I sent to Ted in August of 2016.
Hey Ted,

Today, I was reading stuff about the ADM in El Segundo. I came across your Willys truck in a photo array from the ADM. Look what I found in my drawing book from back in 1961.
I was projecting what our next step would have been if our 40 Willys Coupe had not blown up at Lions in 1960. A high school student with time between homework ***ignments. What a small world.

Thanks,

Junji Nakamura

I sent Ted some of my films back then. He was a guest speaker at the ADM for that 2016 event. The ADM had films that I had put together for the "G***ers" event. Did someone go to this past August, summer event?

Adios, my friend...

 

This is a blurry picture from the November 11 1955 issue of Drag News...I wonder if this is the first Hilborn injector for blowers on top of Yates engine? I don't recall an earlier version of what is now standard. Now the claim of 435hp? Well, maybe?? I ***ume the car is the Mikkleson Brothers dragster that also ran an Ardun and set a claimed e.t. record of around 9.35 in the same year.

 

Junji, nice to see I wasn't the only one! I did this when we had a subs***ute teacher in drafting cl***.

 

The one thing I never understood about the fenders on the vette , they did not even roll the edges just cut the out and run it ' Saber Saw City '

DND

 

Roll the edges?

 

Dean,
Nice between the lines lettering. I remember having to draw those lines first before lettering anything in those drafting cl***es. Nothing resembles those cl***es in the present day middle or high school. That is too bad. Wow, that is an absolutely fabulous drawing... I like the slanting letters. Are you left handed? My son, who is left handed, drew letters in the same angle slant.
Junji

 

what do you know about this car. I am in the process of rebuilding it.i have the original body from tom. go onto comp. coupe dragster on the lamb I have my photos of the build there.

 

Just an image I found on the web.
Good to see it being saved.

 

I'm right handed Junji. 3 years of drafting helped me later in the machine shop when a customer would bring in a part and say "I need 1000 just like this".

 

LOL hated the mandatory drafting cl***es until I wanted my tool and die maker father to make me a mounting plate for the mini bikes I was building at age 11. It sure gave me the motivation to pay attention when he made them EXACTLY to my drawings and there were several Oh **** tries until I got them right.

 

Said they were preparing to flat tow to Indy.

 

No ID - typical pit-shot at Cordova in the "good ole days".

 

Another one - same day.

 

One more

 

Here is Dave Gehrets rail which he ran up and down on the east coast in the 60s and early 70s.
Quote off faseb

 

I'd love to see this car at Pebble Beach. Do a great job if you get to it.