Technical 53-56 f100 guys, what radiator?

hey guys, what radiator are you guys using in your f-100 with a 302/C4? I was told the '67-'79 can be made to fit but I don't have one so I can't check it, lol. I see tons on the auction site but wanted to check here first.

 

I'm using the


Sent from my iPhone using The H.A.M.B. mobile app

 

I'm using a rebuilt factory radiator and it's keeps my engine nicely cooled


Sent from my iPhone using The H.A.M.B. mobile app

 

C'mon man, it's not a secret is it?

 

Now now, just read my next post [emoji56]


Sent from my iPhone using The H.A.M.B. mobile app

 

72 F100 in mine.

 

I have no radiator so hence the question...

 

damn....to bad your not closer....have a nice take out 1953 radiator....for a flathead......truck was pass resto....got a Merc flathead out of it.....need to do a story on that one......

 

Stock radiator is a veritable LAKE !

 

It sure is. Which is why I bought a new factory style from Walker. As it turned out, all our local radiator shops wanted so damned much to recore my old one, I just kicked in the extra bucks and bought the Walker.
That was 6 years ago, believe me, I haven't regretted it for one second.

 

Okiedokie, how did that '72 fit? Any pics?

 

I have a late 70's Dodge van radiator in mine. It fits. It cools.

 

I would like to know also what others have found works.

 

I used a aftermarket 54 with Chev in and outlets,4 row copper,cools like crazy

 

If I were going to keep the truck on a daily basis I would step up and buy a Walker Radiator,they are copper/brass like the original and you can drive the truck worry free for the next 35 years or more. HRP

 

I used this modine 20 years ago,not sure exactly what it supposed to fit but I remember it fit good and worked good for my 390 FE. not sure of your bottom outlet side.


Sent from my LG-US780 using The H.A.M.B. mobile app

 

A walker is not in my budget and I do not need the radiator to look like it is stock. Was just wondering if anybody got anything off the shelf that worked and fit with little effort. I totally understand the walker though, don't get me wrong. My truck is an old farm truck that I am putting back into service. 302 2bbl, c-4, 9 inch rear. 1953 F-100 fordomatic auto column to work the c-4. Pretty much all else is stock. I have limited funds to get this done, told the wife I could have a runner with x amount and I am drawing closer every day. If the easiest and cheapest is the walker I understand but I think some guys on here have come up with something cheaper that works fine. I know, start the bashing. Lol.

 

Cross ref the 522 to the ford numbers, should tell u what to look for



Sent from my LG-US780 using The H.A.M.B. mobile app

 

Does Champion radiator make one for the early effies? I bet they do. They'd look a little nicer if painted. I bought one a few years back as insurance. They are a lot less expensive. Check on that auction site. They are pretty much unrepairable though, so I'm told.

 

I checked with Champion and they do not make one for a small block ford, only small block Chevy.

 

I will take a picture today and try to recall then install of 20 years ago. An easy install though.

 

First gen Mustang is pretty cheap and compact. Outlets will be right.

Sent from my SM-G550T using The H.A.M.B. mobile app

 

i used an original they are a huge radiator. runs really cool .

 

Here ya go olskool, hope it helps you decide.

 

i bought mine off ebay aluminum and 120 $

 

a crossflow from the wreckin yard works too !

 

If it's low buck you want - go on eBay. '66 Mustang radiators start at $98 brand new. I wouldn't trust my money and labor to a junk yard radiator that was much cheaper than that.

 

I'm using the Aluminum stock style "haven't ran the motor yet"
http://midfifty.com/radiators.php?ref=store.php?quick=1&qid=79&qid2=80&N=Radiators

 

I put a 76 f100 radiator in my 56 f100, it works well, I had to use electric fans with it because the 300 i6 sits too low for factory fan

 

I run a 351w and a 78 ford van radiator from napa aluminum core plastic tanks 147.00 new