Customs finishing off my pre-war cheveee project

sorry to hear about Setzer.

 

What @tb33anda3rd said. Tough to loose a best friend.

 

great dog hard act to follow

 

Morning Chris - sorry to hear about yer loss of Setzer - take care me friend

 

thanks again the build goes on ceremony completed holly tree marks the spot

 

Sorry for your lose, dude. He would have enjoyed the ride.

 

hi leakie hard job to replace him but well find another guardian the great memories live on 13 years of them.never a dull moment. life goes on ,the build goes onnot too far away from starting her up.watch this space

 

spent a few hours today trying to install the passenger side winder mechanism and replacing broken/missing track.going good so far hope it will look like new when its welded up and painted.its a challenge to keep it looking stock even though nobody will be looking at some of this tuff

 

replacement window track trial fitted nothing welded just bolted so I can make adjustments if needed untidy floor is a sure sign of loads happening

 

new pin for the door restricters

 

got the bolts machined to take the mass produced look away,made some plates to weld nuts to,to make assembling the bed corners less fiddly,some bolts are stainless so ill powder coat them satin black

 

Those bolts turned out pretty cool, nice touch man.

 

thanx bud some bolts are stainless m8 others 3/8 unc.machining them gave them a uniform look..worked outwell.bolts are ducafe specials

 

Hey Chris - finally took me twuck to Alan / Flatlander - he's welding on my chassis and installing IFS and mounts for my 327 and T5 and 9" rear - while I'm working on my garage - almost finished with the construction and then will have to paint - keep up the good work you Irish Nut !

 

good to hear you are making progress.before you send your doors for paint don't forget to remove rubber strips from thetop of the metal door cards and in the correspomding place on the doorif you apply heat with a blow torch they become soft and come out easily with a utility knife.its herd workif you don't heat first,if you don't find them let me know ill send a pic of where the y are located gentle heat will do go easy

 

not much to report for today up early and in the hot rod shop.got sidetracked with a visiter from Australia..trial fitted the glass felts pass side.broken tab on pass side so I made one and fitted it.,riveted it on.and painted it.working well so far tech tip bend the felts around a suitable sized pipe for the corners and get nice even bends.glass will fit the openings much better.

 

new kid in town

 

That was quick! Good looking pup.

 

we are having great fun with him,disrupted progress on the 38 for a bit all work and no play you know the saying.no name yet

 

Cute little guy! Looks like a bear cub.

 

great little guy eager to learn new guardian to the 38

 

fitted pass side door glasshad some trouble getting the glass in due to a small eror on my part but its in now.just a little tidy up tomorrow and paint a few bits,make a little bkt for the rear of the felts to stop it popping out of the tracks when the glass is wound up and were there.

 

Nice Chris - it's good to have a buddy !

 

top man on the lathe,leakie

 

made up some alloy plates to fill the voids in the a pillar behind where the door straps mount.1.5mm alloy weigh next to nothing.stuck to the back of the a pillar with adhesive will keep the weather out

 

wiring has commenced 1 day in starter is turning over and charging circuit complete another 1-2 days in it

 

today trial fitted the inner wings and wings along with the hood.checked for fit...some shimming needed here and there but not too far out.

 

Wow, looks like a whole truck! Looks good, almost there bud!

 

Nice work, keep it going.

 

thanks leakie and red.first dry run on the front is going well,