Pay it foward = free parts for HAMB members

Free '52 olds 303 core engine
No accessories and no sheet metal
Just an assembled block and a pair of heads.
Must be picked up where is as is
Located in the South Sound area between Seattle and Tacoma.

 

55 chevy outside mirror--not new but very nice
BelAir side script 2--orig but very nice-spoken for
inside mirror bracket--very very nice as new
will be diggin for more soon-hope someone can use this stuff
Just pay the ride--THX

 

Mike - if you check more closely, I believe you might find the number to be 9794233. Pontiac 8's and 9's can be difficult to distinguish. In which case it is from a 1969 400 CID.

I'll let someone else figure out the Chevy.

Jon.

 

I'm out of town for a few days, but I will check it out when I get home. Thanks for the suggestion.

 

I have a 58 Ford car 3 speed trans that needs a new home,do not know the condition but its free and can be picked up in the Dayton Ohio area.

 

Have a Bob Drake paper "Windshield Glass Pattern for '40 Fords". Free to the first member to PM me.

 

Free frame. Tube axle 5 on 4.5 bolt circle. ( inch that needs work, I think. You could use the tubing for making shelves or something. You haul.

 

Rear glass window for a Henry J nut you have to pick it up or arrange to have someone to get it for you. HRP

 

Free turbo350 trans & converter, worked good when pulled but has been sitting in shed for 7 years. Carrollton Tx.

 

I have a pair of 1932 Tudor fenders. They look good but were rusted where they mount to the body. There is a fiberglass repair. They look ok on the car or be good for patching up another set or custom work. Free. Don't expect me to box and ship though. I do travel from DC to Albany NY alot though. Taking up room but I can't bring myself to junk them.

 

Not exactly Hamb friendly but if you need a Corvette Q-jet carb and manifold for a SBC came off a 77 Corvette. Free just e-mail and pick up. I'm 3 mi. away from Rhinebeck Fairgrounds.

Pat

 

Check out the new section in the classifieds: "pay it forward"

 

I would almost drive that for it. Those were good setups for a drivin around car.

 

I never knew THIS thread existed!!!!! I have lots of stuff, that can be yours for the SHIPPING costs only.
Ohio brand, .030 over, flat top with 4 valve relief, cast pistons, NIB, for the Chevrolet 305 V-8 engine.
Full set of take-out rods from a 350 Target Master engine, 5.7 inch large journal rods.
Chevrolet 307, nodular iron crankshaft; fresh turn, but needs to be cleaned-has "surface hazing" that comes right off.
Chevrolet 319 3 speed with overdrive transmission. This probably should be a pick up item.
I have LOTS of SBC stuff FOR SALE; what do you need? I am Butch/56sedandelivery. I DON'T DEAL IN JUNK!