Register now to get rid of these ads!

Features The Definitive "MILD CUSTOM" Photo Thread....

Discussion in 'Traditional Customs' started by Centurion9, Mar 31, 2011.

  1. kjones104
    Joined: May 26, 2018
    Posts: 16

    kjones104

     
  2. kjones104
    Joined: May 26, 2018
    Posts: 16

    kjones104

    I saw on this and several others, the chrome side pipes all had covers at the tips. My Dad's 50' did as well, but i put in cut offs to have the option and took the cover off. Is there a reason this era of cars did not use the pipes?
     
    Bowtie Coupe and loudbang like this.
  3. bscc50
    Joined: Nov 17, 2013
    Posts: 100

    bscc50
    Member
    from n.e.

    most times they were just dummies used to make the car look even lower. a lot of times if you look you'll see both, lake pipes mounted on the sides and dual exhaust running out the back.
     
  4. Sancho
    Joined: Apr 24, 2001
    Posts: 5,036

    Sancho
    Member

    Some times they are hooked up without cut-outs. That way the exhaust runs through the mufflers and out the back.
    Take off the caps and the lake pipes are wide open. I know of a few done this way.

    More often than not they are dummy pipes. Just for the look.....
     
  5. Russ B
    Joined: Jun 13, 2010
    Posts: 1,589

    Russ B
    Member

    55Deso, Gotgas, Jalopy Joker and 9 others like this.
  6. kjones104
    Joined: May 26, 2018
    Posts: 16

    kjones104

    biggeorge, chryslerfan55 and loudbang like this.
  7. kjones104
    Joined: May 26, 2018
    Posts: 16

    kjones104

    are you going for a restore, or "mild" custom? Engine?
     
    loudbang likes this.
  8. straykatkustoms
    Joined: Oct 30, 2001
    Posts: 27,759

    straykatkustoms
    ALLIANCE MEMBER

  9. Maverick Daddy
    Joined: Nov 26, 2008
    Posts: 4,714

    Maverick Daddy
    Member

    20180610_201108.jpg 20180610_201024.jpg 20180610_201137.jpg My old ford, the "Shrimp Boat"
     
    Last edited: Jun 11, 2018
  10. Dusty_v8
    Joined: Jun 6, 2018
    Posts: 14

    Dusty_v8

  11. 'Mo
    Joined: Sep 26, 2007
    Posts: 7,419

    'Mo
    Member

    chryslerfan55 and Dusty_v8 like this.
  12. Taboo56Chevy
    Joined: May 21, 2018
    Posts: 1,990

    Taboo56Chevy
    Member

    A couple of Miss Taboo early in her kustom life before any of the big head light or tail light swaps.

    266446_244206802259748_1847094_o.jpg 259967_244206752259753_47701_n.jpg 263532_244206775593084_7084759_n.jpg 264427_244206642259764_7533691_n.jpg 269867_244206118926483_7425670_n.jpg
     
  13. 'Mo
    Joined: Sep 26, 2007
    Posts: 7,419

    'Mo
    Member

  14. gonmad
    Joined: May 17, 2007
    Posts: 1,760

    gonmad
    Member

  15. Jalopy Joker
    Joined: Sep 3, 2006
    Posts: 33,989

    Jalopy Joker
    Member

    x2
     
  16. Taboo56Chevy
    Joined: May 21, 2018
    Posts: 1,990

    Taboo56Chevy
    Member

    I have always loved the side trim job, but originally the bumpers were not well though out when first put on. I don't have any good photos and even Rod and Custom did a good job hiding it, but there was a huge gap between the trunk and the bumper since the 56 sat farther back. It wasn't till the 80's when my grandfather finally made a panel to fill the gap and then in 93 with the trunk was pancaked was it actually fitted to the body.
     
  17. 'Mo
    Joined: Sep 26, 2007
    Posts: 7,419

    'Mo
    Member

    I have been a fan of this car since the little pages. The car was a winner from the gate, and has only improved.
    It is a real thrill to have your updates. Thanks so much for sharing!
     
  18. ironandsteele
    Joined: Apr 25, 2006
    Posts: 6,149

    ironandsteele
    Member

    coupe.jpg

    I'll play. My mild custom '36. Shaved cowl, filled roof, one piece (enclosed) rear fenders, lowered spare, '41 Ford bumpers, lowered headlights, additional hood side stainless, etc
     
    Ranchero59, slim38, Oilguy and 16 others like this.
  19. D.Conrad
    Joined: Jan 8, 2010
    Posts: 528

    D.Conrad
    Member

    You have very good taste.^^^
     
  20. autoworx1
    Joined: Oct 1, 2006
    Posts: 314

    autoworx1
    Member
    from kansas

    1954 Belair, 4/6 chop, Buick taillights, bagged, extra grill teeth, Caddy hubcaps, old spotlights. I tried to recreate a 50s custom that was left for dead then put back on the road. 20180428_110440.jpg 20180428_110609.jpg
    20180428_110600.jpg
    Sent from my SM-G900V using The H.A.M.B. mobile app
     
    Last edited: Jun 20, 2018
  21. davidvillajr
    Joined: Apr 4, 2005
    Posts: 1,209

    davidvillajr
    ALLIANCE MEMBER

  22. Sancho
    Joined: Apr 24, 2001
    Posts: 5,036

    Sancho
    Member

    @davidvillajr
    Belongs to Gary Fountain (or did). Starlite Rod & Kustom did at least some of it.
    shop-tour-starlite-1950-ford.jpg
     
    Ranchero59, slim38, Roadsir and 12 others like this.
  23. Lou kriger
    Joined: Mar 16, 2009
    Posts: 913

    Lou kriger

  24. ironandsteele
    Joined: Apr 25, 2006
    Posts: 6,149

    ironandsteele
    Member

    Thank you, I appreciate that.
     
    chryslerfan55 and loudbang like this.
  25. BigO
    Joined: Jun 21, 2006
    Posts: 3,459

    BigO
    Member Emeritus

    Last edited: Jun 28, 2018
  26. dan31
    Joined: Jul 3, 2011
    Posts: 1,100

    dan31
    Member

    :D^^^ I awesome you mean assume.
     
  27. BigO
    Joined: Jun 21, 2006
    Posts: 3,459

    BigO
    Member Emeritus

    I had auto correct. Thanks for pointing that out.
     
    chryslerfan55, dan31 and loudbang like this.
  28. NeonGodzilla
    Joined: Sep 4, 2007
    Posts: 66

    NeonGodzilla
    Member

    2017021095134900.jpg FB_IMG_1503253427747.jpg FB_IMG_1487004017262.jpg Here's my 59 Galaxie "The Shaman"
     
  29. 'Mo
    Joined: Sep 26, 2007
    Posts: 7,419

    'Mo
    Member

    This has probably been posted before, but for "Definitive Mild Customs", this would be hard to top!
    There were many Kustom Kings, but for mild customs, Watson stands alone! :cool:

    [​IMG]
     
    Last edited: Jul 13, 2018
  30. 'Mo
    Joined: Sep 26, 2007
    Posts: 7,419

    'Mo
    Member

    [​IMG]

    [​IMG]

    [​IMG]
    [​IMG]
     
    Last edited: Jul 14, 2018

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.