Register now to get rid of these ads!

Technical Any New Year's Resolutions For 2020?

Discussion in 'The Hokey Ass Message Board' started by The Shift Wizard, Dec 30, 2019.

  1. So what are you going to do different next year that you didn't accomplish last year? Do you have a project that you swear to God you will finish, no more putting it off? Or are you going to hunt down that special model vehicle that you always dreamed about?
    My resolution is simple (on the monitor screen, anyway). I'm going to get those last niggling details sorted out on my '50 Chevy truck and take a trip farther than the Post Office.
     
  2. oldiron 440
    Joined: Dec 12, 2018
    Posts: 3,761

    oldiron 440
    Member

    Less tapping putter screens and more making sparks.

    My big holdup on the mechanical rehab of the Fairlane for the last few years has been two thing's, #1 I'm a parent to my 8 year old grandson and the family dynamics have changed completely, AKA, divorce, it's nice when you finally get krazy to load her suv up and go, four years and the dust is finally settled down. #2 at the same time the devorce was going on I filed for disability, seven weeks after filling I get a check. Come to find out I worked five to ten years longer than most. So getting back to the 64, I need to mount the rear Caltrack spring hangers and tie them to each other and the frame connectors that need installation. Did I mention that I'm putting in a narrowed rear axle assembly and need to work magic on inner wheel housing's.
    So I'm looking for plenty in 2020 but if I just had a few weeks of how it used to be, I'd be smoking!
    Have a great new year!
    Tom
    Edit:
    I got off topic
    This is about resolutions
    So how about this, let's not live in yesterday and be thankful for today! Let's try it all year long.
    Tom
     
    Last edited: Dec 30, 2019
  3. Im going to do better.
     
  4. NWRustyJunk
    Joined: Jan 2, 2017
    Posts: 481

    NWRustyJunk
    Member

    Keep plugging away at projects!!!
     
  5. chevy57dude
    Joined: Dec 10, 2007
    Posts: 9,188

    chevy57dude
    ALLIANCE MEMBER
    1. Maryland HAMBers

    I vow to drag more rusty shit home.
     
  6. Get my O/T 68 C10 project done so I can start tearing my 33 pickup apart to redo it.
     
    chryslerfan55 likes this.
  7. pkhammer
    Joined: Jan 28, 2012
    Posts: 850

    pkhammer
    Member

    I don't swear anything to God because I'm afraid a big lightning bolt might come from the clouds and zap my fat ass into a pile of soot. However, there are three things I'd like to do:
    -Sell my '64 Falcon
    -Get lots done on my '32 Pickup project
    -Lose 30-40 lbs and throw my BP and gout meds in the trash.
     
    raven, gearheadwelder, slim38 and 4 others like this.
  8. 49ratfink
    Joined: Feb 8, 2004
    Posts: 21,383

    49ratfink
    Member
    from California

    I'm going to stop doing crack this year for sure.
     
    slim38, partsdawg, das858 and 7 others like this.
  9. hotrodjack33
    Joined: Aug 19, 2019
    Posts: 4,654

    hotrodjack33
    ALLIANCE MEMBER

    1. Have the Custom/Lead Sled-ification of the '36 Cabriolet finished by spring (skirts, spare, stance, wide whites etc).

    2. Be a better person

    The 1st one is doable...the 2nd sounds like it may take just a little too much effort...so I'll probably just remain my old asshole self
     
  10. guthriesmith
    Joined: Aug 17, 2006
    Posts: 11,321

    guthriesmith
    ALLIANCE MEMBER
    1. H.A.M.B. Chapel

    Well...considering I have two boys and one girl turning 16 in 2020, I have to finish at least a couple projects. Each boy has a project pu (63 Chevy and 51 Chevy) and apparently my procrastination has caught up with me. Not sure yet what my daughter will want to drive but she has no interest in it being something as old as the boys will be driving.
     
  11. Better than me?
    You set your sights too low. :rolleyes:

    This one reminds me of a one-liner by a character played by that old-time comic, Sid Ceasar; he said: "I'm going to quit drinking, first chance I get". :confused:
     
    mad mikey and Peter Nowak like this.
  12. Thanks for the support. Ill need it.

    Better than you ? No. Better than i did last year.
     
    Last edited: Dec 30, 2019
    chryslerfan55 likes this.
  13. <See that car in my avatar? I WILL be getting something done on it this year. My other '31 DB coupe WILL be getting back on the road this year!
     
    mad mikey likes this.
  14. DDDenny
    Joined: Feb 6, 2015
    Posts: 21,308

    DDDenny
    Member
    from oregon

    I for sure won't be buying a new treadmill like so many people do.
    I'm gonna wait a couple months and buy one at their garage sale, cheap.
    Yeh riiiight!
     
  15. The37Kid
    Joined: Apr 30, 2004
    Posts: 32,301

    The37Kid
    ALLIANCE MEMBER

    Probably said the same things this time last year. Sell all the unwanted crap around here, automotive and not. Finish the garage inside, finish some house projects. Get the T BobTail up and rolling, same thing for the Hupmobile. Happy New Year everyone. Bob
     
    mad mikey likes this.
  16. donno
    Joined: Feb 28, 2015
    Posts: 426

    donno
    Member

    Mine is to not make any!
     
  17. First of all I want to try to forget about this whole 2019 year. It has been a very bad year for me, and to top it off some ass clown backed into my all but new pickup truck today and smashed the passenger side door.:eek::mad::mad: I just hope to have a much better 2020, continue to improve the drag coupe, drag race, And not die from constant stress. Screw 2019!!
     
  18. I hope you do
    Id post my pic again but it would get deleted so ill just say Relax, have a muffin.
    Not to demise your experience.
     
    Last edited: Dec 30, 2019
  19. LOU WELLS
    Joined: Jan 24, 2010
    Posts: 3,281

    LOU WELLS
    ALLIANCE MEMBER
    from IDAHO

    I Resolve To Keep The Herd Running And Fairly Clean.. DSCN1829.JPG .
     
  20. Last year I vowed to clean my shop in order to get to work on my two cars. At least I stuck to THAT resolution. post-37352-143137996175.jpg 17 truckloads later.... IMG_5717.JPG
     
  21. OLSKOOL57
    Joined: Feb 14, 2019
    Posts: 477

    OLSKOOL57
    Member

    Would like to say my resolution is to get engine and transmission in my ‘57. Every time I set a deadline, seems I miss it. So my resolution is to try and “get back to it”. Happy New Year To All !!!!!!!!!.
     
  22. I am going to resolve to:
    1.Stop being judgemental and
    2. Thin the heard by selling every one of my cars but the red ones....o_O I hope..
     
  23. brady1929
    Joined: Sep 30, 2006
    Posts: 9,561

    brady1929
    ALLIANCE MEMBER

    Stop making resolutions that I can't keep.
     
    lothiandon1940 and mad mikey like this.
  24. Gots to take care of my body.....thinkin' the mind is a lost cause........
     
  25. Try and stay out of any hospitals. Drive the 32’s more. Eat less, drink more.


    Sent from my iPad using H.A.M.B.
     
  26. partsdawg
    Joined: Feb 12, 2006
    Posts: 3,791

    partsdawg
    ALLIANCE MEMBER
    from Minnesota

    Going to sell all the crap I have bought and held on to for too long.
    After that I’ll start buying new to me crap
     
    jimmy six and mad mikey like this.
  27. ...try to have fun, drive my old stuff more and make it to 2021
     
    mad mikey likes this.
  28. flatheadpete
    Joined: Oct 29, 2003
    Posts: 10,624

    flatheadpete
    Member
    from Burton, MI

    Keep getting rid of crap I don't need. Ya see, I wanna retire some day and have nothing but me, wifey and a house in the woods.
     
    raven, gearheadwelder and mad mikey like this.
  29. topher5150
    Joined: Feb 10, 2017
    Posts: 3,620

    topher5150
    Member

    Get the engine/tranny installed and hook up a batt to it to see if she fires. If I'm feeling really ambitious rig up some kind of gantry crane with pallet racking and start working on the hacking out the floors.
     
    mad mikey likes this.
  30. 1. bang out all of those little projects around the house to get it ready for sale
    2. move out of MD and into a house with a first floor master and more garage bays than bedrooms
    3. collect parts for my next project
    Chappy
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.