Art & Inspiration The Photoshop thread to end all Photoshop Threads!

Awesome, subtle enough! I like it!

 

There was a guy in Apache Flats who used to cut through the middle and put his TIG on really low...

 

Thanks guys, cool neat-o work helping the old bucket look good

 

Any way I can get one of you fine folks to change my car from this yellow to this green with a black top and wheels?

 

Nothing says "race" like snap-on Moon discs.

 

@Stan Back
Nothing says "race" like snap-on Moon discs.[/QUOTE]

 

showed you , didn't HE !!!!!

 

Me bad.

I guess I'm just used to Dzus buttons. Tried the self-tapping screws once, lost a couple of discs as the GM wheels liked to flex. Never bothered to check the air pressure frequently as I was too lazy to unscrew them and screw them back on – plus that makes the screws even looser. The solution to that is to move the valve stems inside, but that's a pain in the ass to get under and read them.

 

YER Correct on every issue,
I have tried also, cause I love the look. Even put them on my car trailer, lost three out of four on a hundred mile trip...

 

That's crazy, there's an Apache Flats just outside town, here!

 

Hey, at least I didn't say St. Martins, or Etterville. I was going to say "Tempe" but I KNEW he wouldn't believe that one!

(And actually, I messed up...I was thinking Tortilla Flat and mixed my metaphors...)

 

er, a friend of a friend wanted to know what the bad news T would look like without the whitewalls, just blackwall cheater slicks on the back and blackwall tires mounted to hallcraft laced spindle mounts up front.

 

thanks @madfish

 

I've done this a couple times now with great results, I loctite a button head stainless machine screw in from the backside, then run a standard lock washer and nut onto the "stud", add Moon disc then little washer and nylock nut.
They've never came loose in the many years of doing it, now of course they would look racier with dzus but that would require someone to tig the bracket on the aluminum rim.

 

The photo I wanted photoshopped was removed because the donor car for the grill had billet wheels? You guys are worse than Southern Baptists.

Let's see if we can get this again. I've always wanted to see the Edsel grill replaced with that of a '32 Ford. I'm posting 2 different angles of the Edsel, but I'll leave it to you to find a suitable '32 Ford grill.

 

There's NO and then there's HELL NO!!

 

Reminds me of the Packard Request show car...

 

Hmmm... can you widen the grill to the same width as a normal '32 Ford grill and narrow the bumpers?

 

That's just wrong on so many levels.

Mick

 

Thanks!

I have to say, that's not all that bad. Not all that good, either, I suppose, but not all that bad.

 

Facel Vega integrated a vertical grille in a horizontal face by balancing with stacked quad lights.

 

Had one of those, sold it for $8500.

A couple years ago I saw it was a "barn find". Certainly looked like it. Nothing changed, just deteriorated. Sold for $171,000 (supposedly).

 

Hi, i want to paint my car over the winter, can someone photoshop the below pic with the Tangerrine color from house of color? Paint should be over the full car incl. the top.

Thanks in advance, best regards European Custom

 

Now I really understand the "Hell No" response! Yup that is SO wrong, or bad, or Fugly, or . . . . .

 

Maybe helps some but....

 

Haha! Looks like it just sucked on a lemon!