Projects Frenzel Supercharged Ford 1936 3 Window Coupe-Chopped Build

I figured I would start a build on my 1936 Ford 3 Window Coupe since I am finally back after it.
You can follow along on my IG @Spankys_garage
Going to have a solid chassis/suspension underneath, pretty engine and interior, and rough outside...

Chopped and roof filled by the Menges Twins Speed Shop:




Frenzel Supercharger by Aaron Loveless and hand delivered by a Cessna:

Anthracite powdercoating on the Eddie Meyer Heads and Black for the intake. Duel Stromberg 97's

Filled in the firewall and painted it Wimbledon White:

Stock 36 front axle dropped 5" by Anson Axles with 2 leafs removed from the stock leaf. Flattened rear crossmember by John w/ Brass Junkie:

Custom glass all the way around... Getting the hood and decklid louvered Monday by Gene Winfield...

Old cloth style wires...

Just because:

Finally sitting on all fours... I like the stance and love me some wide fives!

Currently at
Hot-rod Chavik for some finishing and customizing. Body is coming off and frame is getting blasted, then add a T-5 Trans, and some mods (flattened rear crossmember) then powder coating it to have a good base to start from. Run brakes, Fuel, Power, Suspension, Open Driveline, and fire that baby up!

 

Absolutely wicked, there clearly has been some serious thought gone into this one. Its going to be a game changer.

 

Thank you! Its a dream build so I am pulling out all the stops and having some serious talen lay their hands on it....

 

Awesome!

 

Nice! Do you have any in progress pics of the chop?

 

That is just too cool as a jewel.

 

A cool looking rod for sure that Frenzel is like unobtainable to most
Enjoy your dream

 

Wowza!
Tom

 

Incredible.

 

I do have a decent amount of pics... I will post some up if you would like?

Thank you!

Thank you! Not sure how I got here but I'll take it and enjoy the build and ride!

Thanks!

Thank you!

 

A car like that, you should consider using Lincoln Zephyr brakes, REAL ones.
Tom

 

Please! Thank you!

 

Is the Frenzel a new made piece. Great looking car & engine.

 

Great looking build. Definitely not an original Frenzel. Nothing wrong with that,just answering a question

 

It is a repop of the original.. #6 ... Best part is it has a few updated parts and I was told to run the crap out of it and if there's any issues, just bring it back in... and you bet I'm going to try...

 

Had an epic day today at Gene Winfields getting 274 Louvers done on the hood and decklid... Great time with Great People!

 

Body was pulled and frame was taken apart to send out to get media blasted, do some fab work, then powder coat it... All by Hot Rod Chavik

 

Could somebody, I say could somebody please explain to me how a 93? Year old man has so much energy?!


Sent from my iPhone using H.A.M.B.

 

Love those chopped coupes ours has small block Chevy with mustang 2 front end and 9 inch ford with coil overs

 

Uh....Flathead, check. Blower, check. Bad ass chopped coupe, check. Dang. Checks all the boxes for me.

 

Cool set-up, just curious, how are you going to drive the generator?
Tom

 

I love the look of this car! Were you the ones who chopped it? I have a 36 to do some decade, & would like the chop to look like this. Thanks.

 

Gene made a massive impression on my grandson Liam. Liam said the same that man never stops. We was hopefully going to get over to tour his place. Anyway gene told Liam he was cool and that was that.

Sent from my KOB-L09 using The H.A.M.B. mobile app

 

And a 36 maybe one day. But yours speaks for itself.

Sent from my KOB-L09 using The H.A.M.B. mobile app

 

Very nice 36!!

Thank you!! I had the same checklist! lol!

Thats a great question and thats the game plan tomorrow... ill post what we come up with...

Menges Twins Speed Shop in Creston, CA chopped it... they are legit!

 

Didn’t do the chop. Was done many years ago we upgraded
The suspension and added a/c. Have had several guys get the dimensions from the windows to use for their cuts

 

Love your hot rod. Any idea of boost & how rise by rpm?

 

A little more progress on the car....
Body ready to be removed.



original frame was shot... found a 40 frame here on the HAMB to change out..

Flattened rear crossmember:

Front frame horns were tweaked on the 40 frame so they were cut out and swapped from the original frame:


Flattened crossmember, open driveline kit, and mocking up the T-5 trans and engine:

 

Little more on the adapter and trans: