Register now to get rid of these ads!

Hot Rods Let's talk Cadillac 331's, 365 and 390's

Discussion in 'The Hokey Ass Message Board' started by Roothawg, Apr 7, 2016.

  1. Roothawg
    Joined: Mar 14, 2001
    Posts: 25,246

    Roothawg
    Member

    Just wondering if anyone has converted to a more modern valve spring, eliminating the clunky valve spring retainer/oil seal? I am thinking I will cut the guides for a umbrella styled seal. Anyone see any issues? My cam is just a mild cam, under .500" lift.
     
    31hotrodguy, kadillackid and loudbang like this.
  2. loudbang
    Joined: Jul 23, 2013
    Posts: 40,324

    loudbang
    Member

    I THINK in the Hagerty engine builds videos series he did something to use modern seals on the caddy they rebuilt in this video series. BUT you will have to go through several of the videos to get to the head work ( I forget which video it's in ). But they are interesting videos. :)

    https://bangshift.com/bangshift1320...ight-build-get-swapped-ford-a-1957-caddy-365/
     
  3. Roothawg
    Joined: Mar 14, 2001
    Posts: 25,246

    Roothawg
    Member

    Thanks for the link. I will have to check it out.
     
    31hotrodguy and kadillackid like this.
  4. loudbang
    Joined: Jul 23, 2013
    Posts: 40,324

    loudbang
    Member

    I forgot click on WATCH ON YOUTUBE it gives the other videos in the series on the right side of the video.
     
    kadillackid and Roothawg like this.
  5. Roothawg
    Joined: Mar 14, 2001
    Posts: 25,246

    Roothawg
    Member

    Just an update:

    I spoke with a guy named Gary at Rocker Arms Unlimited. Very knowledgeable guy. He's been doing this a long time.

    After a long discussion, he told me that he would take my original rocker shaft assemblies and re-chrome the shafts, new bushings, spot face and convert to adjustable for $475. He said it works pretty slick and you don't have to dimple the valve covers.

    He also mentioned that there are 2 different shafts somewhere around 1962. He said they would need to see the assembly to determine which one I have.

    If you are interested talk to Gary at 530-242-1316.
     
    Jet96, winduptoy, 31hotrodguy and 2 others like this.
  6. Yes.

    Factory spring retainers with the oil covers removed.

    D247C4BD-17E3-463E-8C1A-D87D0F098E21.jpeg

    OEM style replacement valve springs with dampers. Dampers wouldn’t fit with stock spring retainers.

    3F385537-65AF-4670-8072-135B20A7DFC1.jpeg

    SBC/SBF modern guide seals fit straight over the original valve guides (.500/.530?).
    Watch for valve lift hitting the seals.
    Had to have .250 machined from the guide height for a very mild Schneider Cam.

    EA76D067-41F3-4866-A9C3-C441E5099BE8.jpeg
     

    Attached Files:

    31hotrodguy, loudbang and kadillackid like this.
  7. Roothawg
    Joined: Mar 14, 2001
    Posts: 25,246

    Roothawg
    Member

    Thanks! Pics always help the simple minded.
     
    31hotrodguy, loudbang and kadillackid like this.
  8. john W.
    Joined: May 16, 2017
    Posts: 126

    john W.
    Member

    Will a 1957 dual quad setup fit on the taller deck 390?
     
  9. Jessie J.
    Joined: Oct 28, 2004
    Posts: 413

    Jessie J.
    Member

    There was no taller deck 390. Misinformation gets repeated.
    ALL Cadillac V-8 intake manifolds '49- 331 through '62 390 will physically bolt on to any 1949-1962 block as all these years had the SAME deck height.
    The 1963 390 has a LOWER deck height and a much NARROWER intake, and the '62 back intake manifolds will not fit, although the cylinder heads remained interchangeable.
    So yes a '57 dual quad setup fit will any 331-365-390 up through the '62 model year.
    It will not fit a 1963 390 or any of the latter Cadillac engines having front mounted distributors.
     
    Last edited: Oct 22, 2021
    loudbang, 31hotrodguy and 42merc like this.
  10. Jessie J.
    Joined: Oct 28, 2004
    Posts: 413

    Jessie J.
    Member

    However. Because the 1963 Cadillac 390 used the same cylinder heads as the earlier 390s, the LOG type 2 piece intakes (4x2, 6x2) should fit a '63 390, just requiring shorter rubber balance tubes that will allow them to fit into the narrower V.
     
    loudbang likes this.
  11. Good info JessieJ
     
    loudbang and 31hotrodguy like this.
  12. Roothawg
    Joined: Mar 14, 2001
    Posts: 25,246

    Roothawg
    Member

    You are correct.
    That was in a reputable magazine , also. So, people take it as gospel.
     
    loudbang and 31hotrodguy like this.
  13. Mr.Musico
    Joined: Jan 7, 2007
    Posts: 1,642

    Mr.Musico
    Member
    from SoCal

    Good thread fellas. Lots of good info.
    I just got my 55' 331 all together and sprayed it last week. Going to run it in my 36 truck. Screenshot_20211022-180647_Chrome.jpg
     

    Attached Files:

    winduptoy, Dogberg, Jessie J. and 4 others like this.
  14. Roothawg
    Joined: Mar 14, 2001
    Posts: 25,246

    Roothawg
    Member

    That's awesome. Make sure to take a lot of pics. I have a 390 for my 36 p/u. Just not sure if I will pull the trigger and use it in the truck or something with no hood.
     
  15. Put some goodies on my 331...
    20211114_141545.jpg 20211114_141538.jpg
     
    winduptoy, Dogberg, Jet96 and 9 others like this.
  16. received_1111416066062566.jpeg received_1081716869290307.jpeg received_3055655634712079.jpeg received_877329616318542.jpeg received_305033244675639.jpeg
    Put a little paint on the 331...im going to make a nice rolling cart and stick it in the corner of the living room.
     
    winduptoy, Dogberg, Jet96 and 7 others like this.
  17. Roothawg
    Joined: Mar 14, 2001
    Posts: 25,246

    Roothawg
    Member

    Nice !
     
    loudbang likes this.
  18. CollegeKid
    Joined: Dec 13, 2009
    Posts: 111

    CollegeKid
    Member
    from Minnesota

    Guys that run valley covers with no PCV or road draft tube ports what do they do for crankcase breathing?
     
  19. Automotive Stud
    Joined: Sep 26, 2004
    Posts: 4,362

    Automotive Stud
    Member

    You'd have to put breathers in the valve covers at the very least unless you want to push oil out of all of the gaskets.
     
    loudbang likes this.
  20. 60elky
    Joined: Dec 19, 2008
    Posts: 59

    60elky
    Member

    I am getting close to having adapters available to put a small block Chevy intake on the early Cadillac. I started out doing a SBC to Studebaker and it was not too different to do the same with the Cadillac. The first one in aluminum is due from the machine shop in the next couple of weeks. The prototypes in the photos are 3D printed in plastic. Some of the manifold needs to be trimmed. Your intake possibilities are pretty much endless with a set of these adapters. I have another thread on here somewhere with more of the development process. I just bought a 671 blower and a SBC intake so the next post should have a blower on the Caddy.

    JK 20210821_074150_resized.jpg 20210819_192508_resized_1.jpg 20211008_164201_resized.jpg
     
    chrisp, kadillackid, Enbloc and 5 others like this.
  21. CollegeKid
    Joined: Dec 13, 2009
    Posts: 111

    CollegeKid
    Member
    from Minnesota

    So you’d have to cut the coolant side of the manifold off? Cool adapter, makes a lot more possibilities available
     
    winduptoy and loudbang like this.
  22. rod1
    Joined: Jan 18, 2009
    Posts: 1,380

    rod1
    ALLIANCE MEMBER

    Elky, Awesome stuff!
     
    loudbang likes this.
  23. rdtreur
    Joined: Jul 26, 2009
    Posts: 196

    rdtreur
    Member

    Here is my ‘58 365 in my 52 caddy coupe. Just looking pretty but stil stock inside. I did replace the o ring type valve seals. Runs nice but still smokes a little from stuck oil ring. Motor sat for 25 years… i hope that solves just from driving more often.
    It’s got a edelbrock carb so need to figure the tv rod adjustment out… if anyone could help me out, please do so ;-)
     

    Attached Files:

    CollegeKid and loudbang like this.
  24. Roothawg
    Joined: Mar 14, 2001
    Posts: 25,246

    Roothawg
    Member

    Start with this. Do you have one of these?
    https://www.jegs.com/i/Edelbrock/350/8026/10002/-1

    I am assuming you are talking about the TV cable for a 700r4 tranny?
     
    loudbang likes this.
  25. 210superair
    Joined: Jun 23, 2020
    Posts: 1,952

    210superair
    Member
    from Michigan

    mrspeedyt, winduptoy and Roothawg like this.
  26. Watch your air cleaners the small chrome can't flow enough air at top end . Changed out mine to GTO air cleaners , they get the job done ! IMG_0113.JPG
     
    winduptoy and loudbang like this.
  27. 60elky
    Joined: Dec 19, 2008
    Posts: 59

    60elky
    Member

    Anyone have a drawing of a Caddy timing cover or the front of the block? I am considering making an aluminum one and depending on the cost I may do a short run.

    JK
     
  28. rdtreur
    Joined: Jul 26, 2009
    Posts: 196

    rdtreur
    Member

    No I’m talking about the tv rod for the stock ‘58 hydramatic…
     
    Roothawg likes this.
  29. Dick Stevens
    Joined: Aug 7, 2012
    Posts: 3,857

    Dick Stevens
    Member

    You should be posting this in the 'For Sale' forum, not here
     
    Last edited by a moderator: Jan 20, 2022
    tuff57 likes this.
  30. CollegeKid
    Joined: Dec 13, 2009
    Posts: 111

    CollegeKid
    Member
    from Minnesota

    Anyone have pictures of aftermarket finned valley covers with PCV valves or road draft tubes in them?
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.