Register now to get rid of these ads!

Technical Early Mickey Thompson valve covers

Discussion in 'The Hokey Ass Message Board' started by stratostreak1, Feb 3, 2023.

  1. stratostreak1
    Joined: Nov 19, 2014
    Posts: 24

    stratostreak1

    Well after many years of searching for some of the most hard to find valve covers , i have had the greatest streak of luck and managed to buy three sets in a matter of weeks. What i bought are the early casting Thompson ( 1959-63 ) and two sets of the 1964 Mickey Thompson M/T logo version for Pontiac. I have a question regarding a casting number on 1 set of the 64 set . One set has it and the others do not. So if anyone else out there has any to compare or info that would help please comment or message
     
    chryslerfan55 and 31 B'ville like this.
  2. Budget36
    Joined: Nov 29, 2014
    Posts: 15,049

    Budget36
    Member

    Pics and the casting numbers would go a long way, I’d think for those that know;)
     
    mad mikey likes this.
  3. wheeltramp brian
    Joined: Jun 11, 2010
    Posts: 3,259

    wheeltramp brian
    Member

    I've got two sets of the Thompson ones but have never seen the early Mt ones in person 20220717_065553.jpg IMG_20190416_183352.jpg 20220604_165020.jpg IMG_20190416_183123.jpg
     
  4. Gambler 1962
    Joined: Apr 2, 2022
    Posts: 66

    Gambler 1962
    Member

  5. stratostreak1
    Joined: Nov 19, 2014
    Posts: 24

    stratostreak1

  6. wheeltramp brian
    Joined: Jun 11, 2010
    Posts: 3,259

    wheeltramp brian
    Member

    Don't know about the ones that are on my car but the spare set I have have nothing on the inside 16755234402823689173604066289577.jpg 16755234692189067114338008618999.jpg
     
    chryslerfan55 and mad mikey like this.
  7. stratostreak1
    Joined: Nov 19, 2014
    Posts: 24

    stratostreak1

    Thanks for looking. Thats a nice ride ,did you make those headers ?
     
  8. hrm2k
    Joined: Oct 2, 2007
    Posts: 5,382

    hrm2k
    ALLIANCE MEMBER

    I found a set of M/T valve covers a few years ago. They said Mickey Thompson and General Motors inside the valve covers. Both covers were still in sealed boxes with GM part numbers on the labels 831637EA-991B-438D-84CD-9924A0E75848.jpeg
     
  9. I like the ones with the the large M/T cast into them..
     
    wood remover likes this.
  10. Sigh............I'd love to find a pair. Closest I can get is a pair of no-name Edelbrock covers, later M/T covers and a pair of those $64, 5 fin made after 2000 pontiacvalvecovers.jpg pontiacvalvecovers1.jpg 34engineincarR.jpg pontiacvalvecovers.jpg
     
  11. I got a set of the later M/T rocker covers with the built in breathers. I got an idea that they are 70s chit. I always wanted a pair and now I wish I had different ones. :eek: :D

    The early M/Ts are the Holey Grail. here is an interesting Tid Bid. In my quest for whatever was in vogue at the time I have seen the really early ones several ways, cast in numbers, no numbers and some with a number boss and stamped numbers. I have no idea of the significance of this but it does muddy up the waters a bit.
     
    chryslerfan55 and hrm2k like this.
  12. I found these big block chevy's interesting, look like a M/T casting but no name inside, only the number and made in Japan. Sold for $115 on marketplace, I've seen similar but with a name cast inside.
    Screenshot_20230204_203309_Facebook.jpg Screenshot_20230204_203334_Facebook.jpg
     
    chryslerfan55 likes this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.