Projects Nostalgic sbc ?

He did say he thought rv cam .. but after i fired it its more ... maybe CC280

 

You go with what ever you can - believe me, I get that!
You’ve built yourself a great ‘thumping’ sbc that looks and sounds great in a tough looking coupe[emoji41]
Now go out and enjoy all your hard work!

BTW: just given you a follow on IG[emoji106] (rat64fink)


Sent from my iPhone using H.A.M.B.

 

finally gets some some daylight

 

'64 327, .030" over, Schneider solid lifters, '56 Vette manifold, carbs, distributor, 2 1/2" Ram Horns, Fuelie heads, in my '55 210. Runs fantastic!

 

Looks amazing!!

 

That sure does look real good man !!!! Real good

 

Go for the early sixties that way you can keep the alternator.. They were selling them for cheap on e-Bay with a nice polished case! I bought one for $65. Then I had my alt guy go over it, he said it wasn't rebuilt to well but the case was beautiful!!!

 

This engine just scream's 1962! Absolutely amazing!!! I love it! Too

 

I was looking into electroplating nickel... thats gonna be my next project... i think nickel looks great...

 

I'm pretty sure thats what I ordered, chrome alt. For like 70ish

 

The engine in my old coupe. Clear red spark plug wires. Generator and stromberg 48's

 

Dual quadrajets, that's rare.. That is one nice looking Chevy!!

 

Quadrajets?

 

Rochester 4Gs

 

Nice!

Sent from my Pixel 3a XL using The H.A.M.B. mobile app

 

I’ve never seen rochesters for dual quads. I wonder How they run compared to WCFB’s?


Sent from my iPhone using The H.A.M.B. mobile app

 

About the same. Remember they were interchangeable to the same year car. Tuning a WCFB because of needles is easier if you have them.
I like the tops raw aluminum and the centers the Alodine gold but it’s tough to do today.
I’ve got a few small base ones, they were used on early Cadillacs.

 

Looks like the old Hedmann Headers that go into exhaust. No collector.

 

The 283 for my 1917 roadster pickup. Taken at the machine shop a couple of days ago.

 

We used to use Rochester 4 jet carbs for 2x4 setups. They were a small square bore carb. They were never as cool as WCFBs but they were cheap and plentiful.

 

1956 Vette with first Gen. 1959 Man-A-Fre. M&V headers with dumps. Engine built by Tim Timmerman 1960.

 

Cadillac, Packard, and Pontiac ALL used them on factory dual quad set-ups.

When properly set up, they run every bit as well as the WCFB Carters. However, in the day, the Carters were favored by most, as the Carters had more printed information plus more aftermarket parts. Rochester catered only to the O.E. whereas Carter and Holley catered to whomever would spend money on product.

The 4G series are EXCELLENT carburetors. While probably an unpopular opinion here, the Rochester 4G series were much more reliable than the early Holley 4150's; just did not have the factory parts or tech support.

Jon

 

The 4Gs were excellent carbs. Most people would not know the difference actually. I think we used 4 jets because we were familiar with them and they were like fleas on a Red Bone.

I put a single 4G on a 283 once, maybe it was a 4GC? I had it, needed a carb and it worked like a champ. I don't recall if it was difficult to bolt on. 50 years and the fog of the '70s makes some of that stuff a little hard to recall.

 

Lots of sbcs came with 4GCs from '56-'66. A 4G is one with a factory manual choke, such as came on the '65-'67 pickups with 327s. I've run several, and never had a problem with them. They're just not what the "cool kids" ran, that's all....and that could be due in part to that, for whatever reason, Corvette engines(yeah, I know, they're ALL Corvette engines) never used 4GCs. Same intake manifold, but the 'vettes always came with WCFBs instead.

 

I just could not remember if it was manual or automatic choke. Like I said lots of water under the bridge, not all of it potable.

 

yes, but I used a band clamp to a matching pipe size exhaust.

 

Yep the 70s were a wonderful 10 minutes from what I can remember.

 

Two decades marked by the same sentiment. The '60s and the '70s. If you remember either you were not there.