Register now to get rid of these ads!

Projects '51 Mild Custom shoebox coupe

Discussion in 'Traditional Customs' started by Tony Ray, Sep 12, 2017.

  1. mikhett
    Joined: Jan 22, 2005
    Posts: 1,573

    mikhett
    Member
    from jackson nj

    MarkIs the best at what he does!
     
    Tony Ray likes this.
  2. mikhett
    Joined: Jan 22, 2005
    Posts: 1,573

    mikhett
    Member
    from jackson nj

    IM diggin it BIG TIME<TONY!
     
    Tony Ray likes this.
  3. miguel.st
    Joined: Sep 4, 2012
    Posts: 54

    miguel.st
    Member
    from germany

    Pretty cool!
    Are you sure with the scoops on the hood? In the pictures they look a little bit too boxy or rectangular compared to the perfect flow of all the other mods.
     
    Stan Back and Thor1 like this.
  4. Tony Ray
    Joined: Sep 8, 2007
    Posts: 1,111

    Tony Ray
    Member

    I’m going to drive it around until next winter then decide how I feel about them before I get it painted. I wanted to have it look a little aggressive on the hood, but now that the body is done and everything flows so well it’s something I may rethink later
     
    chryslerfan55 and Thor1 like this.
  5. Tony Ray
    Joined: Sep 8, 2007
    Posts: 1,111

    Tony Ray
    Member

    Some pics Chopolds sent me.. my lancer wheel covers got the Customs by Flash treatment and were paint in the center to match, Mark also made up a lower dash panel to house my ac vents so it wouldn’t look like a bunch of hanging crap under the dash. Been having a bunch of issues with the speedo cluster and honestly I much rather have gauges that I can see exactly what the engine is doing so he took out the interior light switch(which works with new headlights switch now anyway) the ashtray and lighter and replaced them with my new Stewart Warner gauges. AC572D7D-FCDD-4742-B238-F9DEA7590EF4.jpeg 0CC4F929-7646-4FB7-A897-E52B957D60A4.jpeg 06C81734-9AD9-4683-9B83-31A989373EB7.jpeg
     
  6. Chop50
    Joined: Jan 16, 2006
    Posts: 217

    Chop50
    Member

    Nice looking car with great patina. I had a built 283 (bored to 301) back in the 60's, it was very fast!!
     
    Tony Ray likes this.
  7. 210superair
    Joined: Jun 23, 2020
    Posts: 1,952

    210superair
    Member
    from Michigan

    My ac vents in my 51 are pretty much the same.
     
    Tony Ray likes this.
  8. The FIRST '49 Coupe....This picture was taken in 1960.. my brother and I and some friends built..he was 18 and I was 15. '58 Pontiac Tri-Power (carbs) .. same '55 Dodge Lancer side trim. Still looking for another set for my current '49 Coupe..
    SintonCar 49 only.jpg
     
    Last edited: Jan 15, 2023
    brEad, BigRRR, Thor1 and 5 others like this.
  9. Tony Ray
    Joined: Sep 8, 2007
    Posts: 1,111

    Tony Ray
    Member

    Nice!!!! That trim just looks great on a coupe!
     
  10. I realize it may be too late, but since you are air conditioning it, you don't need those tilt out back windows, and if you can find some from a Business Coupe, which are fixed and won't leak or make noise on the highway.. I traded mine to a guy from California, who lied about "good shape" ..both glasses were delaminated and one was broken, but that didn't make any difference to me since I went with all new glass all around....by the way are you going with electric windows? Bear Claw door latches?
     
  11. Tony Ray
    Joined: Sep 8, 2007
    Posts: 1,111

    Tony Ray
    Member

    I went with all new glass for the windshield and side and quarter windows. Eventually I may put electric windows in it.. crossed my mind and it’s something I can do down the road. As far as the latches, Chopolds had a caprice out front of his shop that we cut the latches out of and put them in my car. Worked out pretty good!
     
    Last edited: Jan 15, 2023
    brEad, Thor1, chryslerfan55 and 2 others like this.
  12. 210superair
    Joined: Jun 23, 2020
    Posts: 1,952

    210superair
    Member
    from Michigan

    I have ac but honestly I rarely run it, and I love my tilt out windows!
     
    Tony Ray likes this.
  13. By the way did you review my gallery regarding the doors? It would sure be a lot easier to do your electric windows while you still have everything all apart..
     
    chryslerfan55 and Tony Ray like this.
  14. Tony Ray
    Joined: Sep 8, 2007
    Posts: 1,111

    Tony Ray
    Member

    I like em too.. the whole reason I got the AC is my wife was classified as in stage 3 heart failure. So being in a hot environment doesn’t do her any good. So when she is with me I can pop on the ac and keep her cool, otherwise for me it’s windows down arm out window and listening to my pipes!
     
    brEad, Thor1, Hombre and 3 others like this.
  15. VEDETTE
    Joined: Oct 14, 2010
    Posts: 469

    VEDETTE
    Member
    from FRANCE

    '49 ford coupé, can you tell me which front tires you bought?
    Thanks! ;)

    [​IMG]
     
    chryslerfan55 and '49 Ford Coupe like this.
  16. All four are Diamond Back Classic III 15" radials...255/75(?) Rears and 225/75 on front... I am sure about the rears but I'm guessing at the fronts.. Actually they are BF Goodrich that diamondback grinds the lettering off of the outside surface but leaves it on the inside surface..

    And the saga of new tires
    https://49fordcoupe.smugmug.com/New-Rear-Tires/
     
    Last edited: Jan 15, 2023
    chryslerfan55 and Tony Ray like this.
  17. Here's the gallery for "The Doors"..

    https://49fordcoupe.smugmug.com/The-Doors/

    And maybe I'm just a big sissy, but I think I would be a little concerned about cutting those big ass holes through both sides of the frame on both rails.. since your exhaust is coming out in front of your rear tires you shouldn't have problems with it scraping the ground unless you go really really low with your ride...

    And how about electric cutouts?
    https://49fordcoupe.smugmug.com/Fixing-Exhaust-Cutouts/
     
  18. VEDETTE
    Joined: Oct 14, 2010
    Posts: 469

    VEDETTE
    Member
    from FRANCE

    Thank you! ;)
     
  19. Tony Ray
    Joined: Sep 8, 2007
    Posts: 1,111

    Tony Ray
    Member

    I’ll check it out!
     
    54delray and chryslerfan55 like this.
  20. Tony Ray
    Joined: Sep 8, 2007
    Posts: 1,111

    Tony Ray
    Member

    Thanks for the links! When Mark (Chopolds here on the Hamb) did my exhaust he cut the holes in my frame(it’s boxed) then welded in a pipe that the exhaust goes through. It’s all really solid and not going anywhere.
     
  21. Tony Ray
    Joined: Sep 8, 2007
    Posts: 1,111

    Tony Ray
    Member

    Well finally got around to washing the blue off my whitewalls. Decided to take. A few pictures since I only have them of it when it was in the shop. Still got a ton of work to do yet but it’s drivable for the most part!
    B226E35D-102D-4D1F-B5DB-75514A1844FD.jpeg E0166BC3-BB94-4E9C-B7AE-AF61AAE2A304.jpeg E5B7C587-A9AD-4528-8090-DEA0B0B3DA12.jpeg 5AF617FE-F753-4EE0-A1AD-8E0C232B0BB5.jpeg 1DF34F57-6446-4004-A018-24F2859E75E3.jpeg 27C04BD0-C972-4F4A-93BC-FA3DEE75AF31.jpeg 1614331D-C86E-4AB0-904C-14F48B67F65E.jpeg FB3E1CD7-0CB6-4EAA-AA5A-CF6FEDCD78E5.jpeg F24173DD-1E14-46CF-AE1B-B41C149BF295.jpeg 6EE73743-E781-4482-B688-6AC8B1B4F3D8.jpeg 946BBE24-4812-4537-A25D-129302CCD916.jpeg
     
  22. WHERE did you get that 55 Lancer trim?!?! I've been looking for years..
     
    54delray and Tony Ray like this.
  23. Tony Ray
    Joined: Sep 8, 2007
    Posts: 1,111

    Tony Ray
    Member

    I spent a lot of time on the dodge Facebook groups. Ended up getting lucky and got 2.5 sets. We put the better one on the car and the other one is going on Dick “Peep” Jackson’s car owned by Octavio Chavez now.
     
    54delray and '49 Ford Coupe like this.
  24. So you still have the other "half set" ?? I have the two short front fender pieces....
     
    Tony Ray likes this.
  25. Tony Ray
    Joined: Sep 8, 2007
    Posts: 1,111

    Tony Ray
    Member

    Holding on to the pieces I have for the interior.. if I go a different direction I’ll give you a shout!
     
    Last edited: May 6, 2023
    54delray likes this.
  26. You might check out my interior on this link... Be sure to watch that first video for the finished product but then the rest of this galleries all about what it took to get from there to here.. also click on the home button on the upper left of this gallery to see the entire 3000 Plus pictures and videos of everything I've posted to my website...

    https://49fordcoupe.smugmug.com/The-Interior/
     
    54delray, Tony Ray and catdad49 like this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.