Technical 1955 Dodge HEMI engine removal points

The pictures are of the psngr front and the Drvr rr of the cyl heads. I need to make brackets, in order to hook up the cherry picker. Is this a suitable area to mount those brackets, is my question..

 

Sure

 

Appreciate that. Quick an easy

 

The way it is done, haul away !!!

 

Seemed like something I should know, but "better safe than sorry" came to mind.

 

Here is an option that worked for me.
Stable and easy to set up and balance. Just need one strap.

 

I have one of those straps at the shop. I'll check things out and see if I can't make that work. Thanks!

 

I like and use a screw type leveling device. Made brackets for the 2 engines bending the to clear rocker covers it left on. Straps are good.

 

I have seen them use fan belts wrapped around the exhaust manifolds at junkyards.. pulled with a fork lift...

 

I ended up making brackets.

 

Here’s mine

 

5/16? Sure , 1/4 maybe.

 

3/8 sure, 5/16 maybe, 1/4 not

 

With a Chevy water pump you have block off plates on each end of the heads that a plate could eastly be made toto lift the motor. With a Chevy water pump and aluminum intake you are only around 550 lbs. I love the intake who made if?