Register now to get rid of these ads!

Projects 32 5W Build - The $4K Swapmeet Body

Discussion in 'Traditional Hot Rods' started by NealinCA, Feb 2, 2023.

  1. Mart
    Joined: Mar 3, 2001
    Posts: 4,946

    Mart
    Member

    Loving this build, Neal. The car looks great and the work on the steering boxes is fantastic. Mart.
     
    cactus1 likes this.
  2. Really! While you may bitch about the price; there are some parts where only chrome will do.
     
    Outback and -Brent- like this.
  3. NealinCA
    Joined: Dec 12, 2001
    Posts: 3,323

    NealinCA
    ALLIANCE MEMBER

    Got the heads clearanced for the Potvin 3/8 cam. I spot faced the valve pocket with an endmill, then smoothed out the combustion chambers to eliminate any sharp edge/hot spots. I did a final check with grease on the valves checking for any contact with no head gasket. I had a couple small spots to clean up, but all clear now.
    20240217_103653.jpg 20240217_123822.jpg 20240217_135900.jpg 20240217_135906.jpg
     
    brEad, BigJoeArt, porkshop and 10 others like this.
  4. NealinCA
    Joined: Dec 12, 2001
    Posts: 3,323

    NealinCA
    ALLIANCE MEMBER

    I also messed with the dash a little bit. I chose a hypothetical 1956/57 build date for this car, so trying to keep parts from that era or older. Since the SW big block gauges date to the 56/57 time frame, i chose 56/57 Thunderbird switches. I installed the T-Bird ignition and light switches in the SW straight eight panel, as well as a cigar lighter in the column drop.

    I think the switches go well with the rest of what's going on here. 20240218_185106.jpg 20240218_185228.jpg 20240218_185126.jpg 20240218_185021.jpg 20240218_185138.jpg 20240218_185215.jpg
     
  5. Nominal
    Joined: Jun 9, 2005
    Posts: 174

    Nominal
    Member

    That looks great!
     
    Outback likes this.
  6. Mart
    Joined: Mar 3, 2001
    Posts: 4,946

    Mart
    Member

    Hi Neal. Great looking dash/gauge/switch/wheel combo.
     
  7. thunderbirdesq
    Joined: Feb 15, 2006
    Posts: 7,091

    thunderbirdesq
    Member

    Looks really great! Nice work as usual!
     
  8. glennpm
    Joined: Mar 29, 2015
    Posts: 188

    glennpm

    WOW, WOW, WOW!

    Glenn
     
  9. MMM1693
    Joined: Feb 8, 2009
    Posts: 1,354

    MMM1693
    ALLIANCE MEMBER

    X2
     
  10. The37Kid
    Joined: Apr 30, 2004
    Posts: 31,633

    The37Kid
    Member

    Like the adjustable Red Line arrow on the tach!
     
  11. NoSurf
    Joined: Jul 26, 2002
    Posts: 4,583

    NoSurf
    Member

  12. benchseat4speed
    Joined: Feb 11, 2008
    Posts: 425

    benchseat4speed
    Member
    from Golden, CO

    X3. Fantastic work. Really like when guys pick a specific year or two for their cars and stick to it. Final product looks outstanding when you do that.

    The mixing of parts and styles from various decades really burned me out on the whole 'gasser' thing. Nice to see a purist putting this deuce together.
     
    SDS, Outback, Squablow and 1 other person like this.
  13. tim troutman
    Joined: Aug 6, 2012
    Posts: 1,011

    tim troutman
    Member

    switches & horn button look amazing . I have made some items out of stainless freeze plugs & polished
     
    NealinCA likes this.
  14. tim troutman
    Joined: Aug 6, 2012
    Posts: 1,011

    tim troutman
    Member

    wow what a set of gauges very impressive as is the rest of it
     
  15. SDS
    Joined: Apr 28, 2011
    Posts: 949

    SDS
    Member

    Picking a hypothetical build date is a great idea. The dash looks spot-on. Did you source the gauges separately or were you lucky enough to find a set?
     
  16. NealinCA
    Joined: Dec 12, 2001
    Posts: 3,323

    NealinCA
    ALLIANCE MEMBER

    The gauges were one at a time over the last 10-15 years. Swapmeets, parts trading, HAMB, Ebay, Instagram, etc...
     
    brEad, 57tailgater and -Brent- like this.
  17. Love it! Those knobs/ switches were stock in my ‘54 Customline as well. Once the T-bird came out they swiped them for it! (Or so I have been led to believe...)
     
    Squablow likes this.
  18. NealinCA
    Joined: Dec 12, 2001
    Posts: 3,323

    NealinCA
    ALLIANCE MEMBER

    That's cool to know, and that makes it more plausible that they would have found their way into a hot rod dash by 56/57.
     
    Tim_with_a_T, porkshop and cactus1 like this.
  19. Also, if you get yourself a spare radio knob you can adapt your ignition key into it and it looks pretty trick!
     
  20. SDS
    Joined: Apr 28, 2011
    Posts: 949

    SDS
    Member

    I like the key he has, in that location...reminds me of where it is in my 55 f100 and the key is similar (fit's his theme well). There were a lot of split kneecaps in the 50's - no seat belt + frontal collision = kneecap meets ignition key - it was quite common.
    Is there a separate starter button somewhere?
     
    cactus1 likes this.
  21. I do as well. Not talking about changing the location. I’m saying you could put another knob on the end of the key and it would look just like another dash knobs/switches. I set one up like that for my ‘54 just for fun. I don’t have a picture handy and sold the car a few years ago unfortunately.
     
    Dick Stevens and porkshop like this.
  22. NealinCA
    Joined: Dec 12, 2001
    Posts: 3,323

    NealinCA
    ALLIANCE MEMBER

    That is a very cool idea with the radio knob, but I think SDS was just referring to the 50's Ford key being a nostalgic piece in itself...

    Ford Key.jpg

    [​IMG]
    Something to further add to the 50's vibe of the dash. And I agree. I wanted an old Ford key, part of the reason I chose the T-Bird switches.
     
    Last edited: Feb 21, 2024
    SDS, SilverJimmy, Outback and 5 others like this.
  23. NealinCA
    Joined: Dec 12, 2001
    Posts: 3,323

    NealinCA
    ALLIANCE MEMBER

    I just ran across this old mockup pic. There wasn't even a frame or axles under tbis. Just 2x4's and dreams holding it up.
    IMG_20180624_161505_267.jpg
     
    brEad, heavydumper, Squablow and 14 others like this.
  24. Outback
    Joined: Mar 4, 2005
    Posts: 2,829

    Outback
    Member
    from NE Vic

    How cool is that!
     
    cactus1 and porkshop like this.
  25. Gotta love a mock-up!
    It means that what were once dreams and ideas just took a big step toward a reality.
    Great car and thread!
     
  26. 19Eddy30
    Joined: Mar 27, 2011
    Posts: 2,753

    19Eddy30
    Member
    from VA

    Pic from Roadster.Com
    There is alot of information about Stewart Warner Gauges
    dates / years and torque thrust wheels and more

    IMG_1309.png
     
  27. NealinCA
    Joined: Dec 12, 2001
    Posts: 3,323

    NealinCA
    ALLIANCE MEMBER

    Here's some of the SW Big Logo/Big Block Gauge info from Roadsters.com
    Big Logo Gauges.JPG SW Date Codes.JPG
    And some info on the SW 8 Gauge "Special" panels

    SW Special Panel full page.jpg
    SW Special Panel.jpg
    SW Panel #1.jpg
    SW Panel #2 (2).jpg

    So thinking back on it, the gauges are what set my hypothetical build date. The dash and gauges were really the first parts I started gathering for this project. I had plans to build a 5w way before I had a 5w.
     
    SDS, porkshop, dwollam and 5 others like this.
  28. alchemy
    Joined: Sep 27, 2002
    Posts: 21,431

    alchemy
    Member

    A decade or two ago I gave Dave Mann that SW dating info, and then we discussed the dates on the back of my gauges in my collection to determine the changeovers from winged to big logo to modern, and even production of the twin blues. There is no hard and fast rule on the changeover date, but we narrowed it down best we could. I had dozens of gauges and catalogs of the era to review, and he had lots as well. I wonder what ever happened to Dave?
     
  29. NealinCA
    Joined: Dec 12, 2001
    Posts: 3,323

    NealinCA
    ALLIANCE MEMBER

    Thanks for the additional info. I googled Dave and he seems to still be active on Facebook.
     
    porkshop likes this.
  30. -Brent-
    Joined: Nov 20, 2006
    Posts: 7,526

    -Brent-
    Member

    I love that you started with the dash and gauges and let them lead the way for this project. Looking at the whole of it, so far, it's really cohesive.

    My thinking/inspiration/effort is similar with my coupe.
     
    porkshop, Outback and deuceman32 like this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.