Hot Rods BENNETTS ‘Pacific-Indian Special’ ‘29 Roadster on ‘32 rails

Thanks for the kind words! Absolutely. Use the photo for what ever! I think I still smell it.. haha

 

Got the axle tweaked- it’s sitting at 1.5* positive camber. Will try and get it closer to 1.0* positive.
I did clean up my RHD ‘32 spindles and got the setup on the axle. Heated and bent the steering arms to suit the axle. I will heat and lower the steering arms to have the drag link get closer to the wishbone. I’m now getting excited about this car!
Before the modifications below:

 

Really nice work

 

Thank you sir!

 

A used a piece and steel and clamped it down centre of the axle and wish bone, the end was measured to be the centre of the rear diff, just using the ‘Ackerman’ theory and keeping the steering arms inline with the centre line from kingpin to rear end. Not sure how crucial this is but thought I’d give it a crack.

I lowered the drag link to get it closer to the wishbone for more frame clearance and now it’s time to mock it up in the frame!

 

A friend of mine, Greg made me some leather for a fuel tank and mounts I made. They turned out incredible, BUT surprised me with a set of aircraft belts from believed Canberra Bomber for the roadster. They are going to look great!
The tank pictured will be going into a beautifully chopped 32 3 window coupe owned by Craig Ross and chopped by the one and only Mark Codd.

 

Wasting more time not working on the roadster I decided to make a frame for the print- thought it would be cool to ages it and have it look aircraft-ish. After looking at it I think black might be best. I stuck a shop light behind to give me an idea what it might look like..

 

From extending and making a fuel tank from two oxygen reserve bottles I had ends as surplus. Multiple ideas and contemplating this frame idea. Had fabricated for an images captured by Mor Speed shop I thought why not match the frame with the bottle ends- now lamp shades. More to come!

 

Very Steampunk! I like it!

 

Jordan,
Do you ever sleep? Or, just lay there dreaming up cool stuff@

 

.

yeah me and sleeping have never been great. Busy mind!

 

Mean while, while wasting more time not working on the roadster a scored some great treasures over the weekend. Thank you Cully.


I’m surprising Ben and got some new shoes for his roadster. Was worried the ‘smoothies’ wouldn’t fit the style but actually really like them- once a chrome windshield is fitted it should balance out the chrome too. The rears are 15x8s worried maybe too wide for the tire but again- it’s not terrible.

 

An artist with mechanical skills- plus others- that doesn’t happen in one person very often, keep up the good works.

 

Well unfortunately the roadster hasn’t had much love lately, but I have been collecting important parts. While priming the wheels and front axle for the ‘Radial Flyer’ I began to fall in love with this colour- champagne-pewter-olive-sorta colour. I think I’m going to paint all the moving components under the car in this colour.. tested the rear axle tubes and driveshaft. Lots more to come soon as I’d like to get this rolling for the final (ish) time within the month.

 

Another shot of the primer on the 18’s

 

I am just checking in on progress. It looks fantastic so far, and your YouTube channel is the best. It helped me with my 32 Roadster build with a 36 rear end and wishbones.

 

Do you have a paint code or name for that " champagne-pewter-olive-sorta colour"?
I have a perfect use for it.

 

I’ll send you the primer part number, I think I could mix it in base coat too

 

Thanx Jordan!