Register now to get rid of these ads!

Technical Should I leave It or Change It?

Discussion in 'The Hokey Ass Message Board' started by Johnny Gee, Sep 22, 2024.

  1. Johnny Gee
    Joined: Dec 3, 2009
    Posts: 13,415

    Johnny Gee
    Member
    from Downey, Ca

    Sat down with pen, paper and opened a tire calculator on my phone.

    The numbers tell me I’ll achieve a 1 1/2” rake with an average 3 mph gain @ 60-70 mph with the tires I specified above.
     
    SS327, lothiandon1940 and Sharpone like this.
  2. A Boner
    Joined: Dec 25, 2004
    Posts: 7,703

    A Boner
    Member

    Stock wheels and caps…lower the front slightly!
     
    i.rant likes this.
  3. i.rant
    Joined: Nov 23, 2009
    Posts: 4,572

    i.rant
    ALLIANCE MEMBER
    1. 1940 Ford

    For a “sleeper” look go with the caps. For the 1964 look I remember in my area go with 1957 Plymouths and narrow whitewalls, or Baby Moons.For the “no surprise here, looks like everyone else’s “go with the Cragars. Great report from your doc,treat yourself good.
     
  4. Speccie
    Joined: May 22, 2021
    Posts: 259

    Speccie

    I am glad you got the A+ from the doctor. Grey spoke Americans then the Cragars either would look great on your car.
     
    lothiandon1940 and Johnny Gee like this.
  5. stubbsrodandcustom
    Joined: Dec 28, 2010
    Posts: 2,460

    stubbsrodandcustom
    ALLIANCE MEMBER
    from Spring tx

    A+ is great news!
     
    Sharpone and Johnny Gee like this.
  6. The wife is undecided. The likes the dog dish 56 caps. Doesn’t like the full caps (yes!)
    She does like chrome steelies
    But also likes the smoothie with Shannon cones
    IMG_1565.jpeg
    and painted steelies with both trim rings and spider caps
    IMG_1581.jpeg
     
    slim38 and Johnny Gee like this.
  7. AldeanFan
    Joined: Dec 12, 2014
    Posts: 930

    AldeanFan

    Your, car do as you like.
    Personally I have 4 sets of wheels for one of my cars and can change the look in 30min.
    Good luck with your health.
     
  8. 1971BB427
    Joined: Mar 6, 2010
    Posts: 9,060

    1971BB427
    Member
    from Oregon

    Swap to the Cragars, but keep the stock look wheels so you can change up once in awhile for a different look.
     
    Johnny Gee likes this.
  9. saltflats
    Joined: Aug 14, 2007
    Posts: 12,863

    saltflats
    Member
    from Missouri

    My Cragars have the uni lug on the front and shank direct pattern on the rear. Now the rear are 5x5 bolt pattern maybe that's the difference. I like the Cragars.
    Hope nothing to serious wrong brother.
     
    Sharpone and Johnny Gee like this.
  10. Keep the OG style steel wheels and add beauty rings and you'll be set.
     
    2FORCEFULL likes this.
  11. wvenfield
    Joined: Nov 23, 2006
    Posts: 5,615

    wvenfield
    Member

    I'd put wider steel wheels on the back
     
  12. primed34
    Joined: Feb 3, 2007
    Posts: 1,463

    primed34
    Member

    It's only money. Put American Rebels Halibrand style wheels on it.
     
  13. Johnny Gee
    Joined: Dec 3, 2009
    Posts: 13,415

    Johnny Gee
    Member
    from Downey, Ca

    Just so you know. There are 3 differant series of Cragar SS’s made now not including, wait for it… Golf Cart SS’s. Here’s a full break down. https://www.cragarwheel.com/wheels/

    That has crossed my mind.
     
  14. lumpy 63
    Joined: Aug 2, 2010
    Posts: 3,108

    lumpy 63
    Member

    Wider steel wheels on the back, stock caps all around , drop the front slightly. I know I've told you but I dig that car.
     
  15. lumpy 63
    Joined: Aug 2, 2010
    Posts: 3,108

    lumpy 63
    Member

    15x6 front 15x8 in the back with the right offset.
     
  16. TagMan
    Joined: Dec 12, 2002
    Posts: 6,312

    TagMan
    ALLIANCE MEMBER

    Leave it be, until it gets to know you. Eventually, it will let you what, if anything, it needs.
     
    2FORCEFULL and squirrel like this.
  17. Big & little Cragars for sure
     
    chevy57dude and Johnny Gee like this.
  18. ALLDONE
    Joined: May 16, 2023
    Posts: 1,607

    ALLDONE
    Member

    are ralley wheels to new???
     
  19. squirrel
    Joined: Sep 23, 2004
    Posts: 57,383

    squirrel
    ALLIANCE MEMBER

    or maybe just too ugly? :)

    (I had them on my 55 for quite a while)
     
  20. ALLDONE
    Joined: May 16, 2023
    Posts: 1,607

    ALLDONE
    Member

    the more I look at this pic, the more I would leave it as is,...changing it to look like every other 57 is gonna take from it.. individually cool

    [​IMG]
     
  21. Rickybop
    Joined: May 23, 2008
    Posts: 9,905

    Rickybop
    ALLIANCE MEMBER

    I can't choose your wheels.
    But...

    Careful. If you shrink too much, pretty soon you'll be living in a matchbox and fighting a spider with a pin.

    Seriously, all the best, Johnny.
     
    Johnny Gee likes this.
  22. oldiron 440
    Joined: Dec 12, 2018
    Posts: 3,522

    oldiron 440
    Member

    For ten years maybe more the S/S wheel was THE wheel, you just can’t go wrong with them.
     
    Last edited: Sep 23, 2024
    Johnny Gee likes this.
  23. Johnny Gee
    Joined: Dec 3, 2009
    Posts: 13,415

    Johnny Gee
    Member
    from Downey, Ca

    Since the early 80’s I’ve always used 15x4.5 up front. Yesterday I mentioned 15X7’s for the rear. Was looking at 8’s today. Of course the back space.these day’s is 4.3”. Close to 4.5” like back in the day but I need to be sure it fit’s.

    I’ve had it for a couple of years now and it already told me what needed fixing. My turn to tell it what it needs. :)
     
  24. EDMAR'S GARAGE
    Joined: Apr 23, 2024
    Posts: 36

    EDMAR'S GARAGE
    ALLIANCE MEMBER
    from Crete, IL

    1. Good luck with the health issues.
    2. CRAGARS ALL THE WAY!
     
  25. oldsmobum
    Joined: Apr 26, 2012
    Posts: 148

    oldsmobum
    Member

    I am not usually a big fan of Cragars but if they look good on any car, it is definitely this one. If you have the money, get the Cragars and keep the stockers like you mentioned. Then also get the 15x8 rear steelies and paint to match the stockers.

    Now you have 3 flavors to suit your mood. Worst case scenario, it’s not like the 5x4.75 bolt pattern wheels would be hard to sell if it doesn’t work out the way you want…
     
    Johnny Gee and Sharpone like this.
  26. Rodsports
    Joined: Sep 24, 2018
    Posts: 106

    Rodsports
    Member

    Every hot rod should wear Cragars at least once in its lifetime.....
     
    Johnny Gee, Sharpone and clem like this.
  27. twenty8
    Joined: Apr 8, 2021
    Posts: 2,828

    twenty8
    Member

    ^^^ This.^^^ A man after my own heart. Wide stock steelies make me smile.......:D:D:D

    8" for the rear would be way better to mount a 275 tire onto. You have to run real low pressure with 7's to get the tread surface sitting flat and level to the road.
     
  28. 05snopro440
    Joined: Mar 15, 2011
    Posts: 2,072

    05snopro440
    Member

    Exactly. With a 7" and decent tire pressure that 275 will be a balloon.
     
    Johnny Gee likes this.
  29. Johnny Gee
    Joined: Dec 3, 2009
    Posts: 13,415

    Johnny Gee
    Member
    from Downey, Ca

    This I do know. But lady’s put up with high heels to ballon their calf’s. That also is a man design.
     
  30. 05snopro440
    Joined: Mar 15, 2011
    Posts: 2,072

    05snopro440
    Member

    On a stock-looking tri-five I'm in the camp that a 165/80 is way too little on the front. I personally wouldn't go narrower than a 205 with the big 275 in the rear for a street car look.

    205/60, 215/60, or 215/65 would give you a little better width match front to rear to my eye with still a good amount of rubber rake. Of course I lower my stuff, so I'm not sure how it would look at your suspension height.

    https://tiresize.com/comparison/ is helpful for visualizing a big/little combo.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.