Technical wix

I wonder!!!
What if one bought a Fram and a NAPA and opened them ones self what one would see.

Ben

 

My dad had trucks, always used fram filters no problem, i have owned several cars and pickup in me 89 years have not used any thing but fram filters, never had a problem, all you have to do is keep your oil changed regular.

 

It's been done. Do a search on this forum. As I remember, the differences were easy to see.

 

Perhaps I should re word that. What if someone on the forum replicated the NAPA test. And videoed it.

 

But that one was "Made in USA".

FRAM is a multi-national corporation with manufacturing facilities in multiple countries.

 

You guys might be surprised if you really dug into the story, who makes what filter. The same company that makes Fram, also makes AC Delco Filters. First Brands Group owns several filter brands including Fram, Champion Laboratories, and Lubrifiner. I’ve been in this industry way too long to believe each of these companies are making filters of their own design. There is rebranding happening. I’m not an oil filter engineer and when Joe Blow on the internet (said with a Hank Hill accent) cuts apart a filter and starts motherfucking it’s construction, I believe they are full of shit. Let the engineers figure out what is best for each application. The best thing you can do is service the damn filter regularly. Oh, and Fleetgard filters were mentioned, they are a damn fine filter, Fleetgard is owned by Cummins Engine Company. In 34 years, I’ve only seen 1 filter cause an engine problem. It was on an International Maxxforce 9 engine, it caused a low flow problem that didn’t damage the engine, but caused a low Injector Control Pressure issue and by extension a low power complaint. The filter, was an OEM International Navistar filter. We chased this problem for over 2 weeks as a warranty issue in 2012.

 

You've never cut a filter open looking for shiney stuff ? Did you have any idea what to look for in filter construction ? If not , it's pretty much an exercise in futility .

 

Bought a case of WIX filters this past spring, all have Made in the U.S.A on them

 

I have to admit that I’ve never wondered where my filters were made at
So far, so good

 

Where the heck is the " over their head " emoji?

Ben

 

fu·til·i·ty
/fyo͞oˈtilədē/

noun
noun: futility
pointlessness or uselessness.
"the horror and futility of war"

futility
noun
fu·til·i·ty fyü-ˈti-lə-tē


plural futilities
Synonyms of futility


1
: the quality or state of being futile : uselessness
His speech focused on the futility of violence.


2
: a useless act or gesture
the futilities of debate for its own sake—
W. A. White

 

I buy my filters by the case also, and discovered Fleetguard filters made by Cummins. Their LF692 is a 1.5 quart filter that fits Chevy V8's and I paid $11 each for them last purchase. High quality American made, with huge capacity. Might not be good for low slung engines as they hang below the pan, but my cars aren't tail draggers, so no issue.

 

^^^

Until you learn that the six grand you spent on your dream engine, was wasted on false belief.

 

You be Futil,,,, Weren't me , must-a been you

.

 

Worse than China......

 

Don't do that if you are a barstool engineer, or get quality control advice from your hairdresser.
They base their conclusions on looks , appearance, and hearsay .

The biggest complaint I hear about Fram is the "cheap" cardboard end caps on the filter element.
But if you play around with adhesives [like I do] you'd realize this actually is a feature.

Try gluing incompatible materials in a heat cycle environment.

From Fram