Art & Inspiration Interesting inexpensive Craigslist cars

I want the front fenders and the headlights off of that 62! Canted quads, Baby!

 

Seattle area
$1800
Chopped 50 Chrysler
S10 subframe C-notched with Cavalier power steering rack. Retains s10 factory steering geometry.
Slant six engine but easy to drop in something else.

https://www.facebook.com/share/158ABMFMS9/

 

I’d leave the leaning tower of power in it just because and drive the piss out of it

 

That was the plan but I got side tracked by other projects and just lost interest in this one. I was surprised by the amout of people that the slant pisses off. It is more than if I LS swapped it.

 

I had a Slant Six in my 74 Duster that I built using everything I could find from Direct Connection with a 600 Holley, split headers and 4speed. Whenever I pulled into a lot and someone didn’t already know the car they would ask me if I had a 340 in it.

 

1962 Ford for sale by owner - Overton, NE - craigslist

 

1965 Dodge A100 Camper Van for sale by owner - Concordia, KS - craigslist

 

Maybe on the far side of "cheap"

https://portland.craigslist.org/mlt/cto/d/portland-ford-coupe-chopped/7833793067.html
1949 1950 1951 Ford Coupe - Chopped - $10,000 (PORTLAND)



1951 Ford Coupe that looks more like a 1949 or 1950 model
What you get is a drivable 75 year old shoebox Ford with:

1. 36 year old flame paint job that has a few issues and needs rubbing out
2. a body with finished flared radiused wheel wells...and dings and bruises
3. seven year old Coker BIG-n-little radial wide whites
4. rounded hood and door corners and molded-in 1954 Buick grille
5. finished 4 inch chop with finished chopped window moldings and glass
6. frenched head and tail lights - shaved hood, deck, doors, and rear fender beads
7. bear claw door latches that need new solenoids
8. electric windows that need new channels
9. dressed up Ford 390 FE V8 that runs, but needs work
10. nearly new 2 1/2 inch duals with X-pipe and Flowmasters (?)
11. aluminum radiator with SPAL fan
12. battery in trunk, electric 2spd wipers, but no heater/defroster
13. C6 tranny that shifts great, but leaks
14. 9 inch rear end with 4-bar and coil suspension
15. vented front disc brakes and dual master cylinder
16. stock bench seats with original factory vinyl/leather
17. clean Oregon title in my name
18. traditional "hot rod" look (black with red flames, BIG-n-littles)

...built in Portland in 1978...in the 2019 Portland Roadster Show

$10,000 firm (I don't need to sell...serious only....no trades)

Want more info/history or photos, just ask for Ray

PS I know of a local fresh 428 FE for low cash if you buy the car

 

https://bellingham.craigslist.org/cto/d/bellingham-1960-dodge-d100/7833774717.html

1960 Dodge D100 - $6,500 (Bellingham)




© craigslist - Map data © OpenStreetMap
1960 Dodge D100
condition: good
cylinders: 6 cylinders
drive: rwd
fuel: gas
odometer: 47,000
paint color: blue
title status: clean
transmission: automatic
type: truck
1960 Dodge D100 Utiline pickup. Super 225 slant 6 engine, auto transmission. Runs good.

 

This would make a cool little project, and only $1500



https://www.facebook.com/marketplac...eed_ranking_signature":"6268249465969332086"}

 

Good Hot Rod Material

https://www.purplewave.com/auction/...&utm_medium=email&utm_campaign=newsavedsearch

 

The cover art on this catalog looks mighty familiar…











https://www.ebay.com/itm/3061753817...89eJyMpRVi&var=&widget_ver=artemis&media=COPY

 

Same guy for both

https://billings.craigslist.org/cto/d/billings-1962-studebaker-grand-turismo/7834478147.html

1962 Studebaker Grand, Turismo Hawk - $1,500
‹image 7 of 8›







1962 Studebaker Grand Hawkfully complete car less engine and transmission. Have all stainless grill trim.
Clear title, easy restoration project, one front fender is rusty patch panels are $79.

https://billings.craigslist.org/cto/d/billings-1959-studebaker-wagon-panel/7834480487.html
1959 Studebaker Wagon / Panel - $2,500
‹image 7 of 7›








1959 Studebaker wagon Sedan delivery project. I started converting this to a sedan delivery, you won’t see another one since they never made one. No motor or transmission. Small block Chevy mounts installed. I Have 2 hoods, 2 dashes and buckets of parts. All trim is included.

 

https://spokane.craigslist.org/cto/d/elk-1927-ford-model/7834397677.html

1927 ford model T - $3,500 (North of Spokane)













1926/27 model t roadster pickup. Has model a front axle with hydraulic brakes along with 1940 ford rear axles. Sitting on a model a frame with an ab flathead with a 1939 ford transmission. Car does not run and body is not bolted down needs to be put together. Sold with bill of sale

 

1960 hillman huskey for sale by owner - Carson City, NV - craigslist

 

That Hillman reminds me of one I really wanted to save out of a wrecking yard back when
I was a teen. My dad talked me out of the starry eyed dream with "What do you want to do and how much is it going to cost and how much do you earn right now"... I would have torn it apart and never finished it. Thanks, dad, but it would have been cool.

 

Rod, your dad must have been pretty well trained in the art of reasoning.

My dad would have ask me where I thought I was going to do all the work the pile of junk needed, because I sure wasn't doing it at his house.

With my son, it was "Your time and your money. If you are there working on it, I will help you."

 

He got me my first motorcycle at 9. He owned over 30 different motorcycles (each a different brand except 2) had a jag when I was born, had British sports cars when I was young, restored a 62 Alpine (couldn't afford a Tiger, they appreciated just beyond his grasp) when I was in my late teens. We went to all sorts of racing when I was a kid, GNRS, Paso, CHRR and others when I was older.

I miss him. That's him getting something out of his Ford at CHRR.
I asked him to park next to the Plymouth because I have one I still need to finish.

 

For what's there, it seems a reasonable price:

 

61 Rambler 4dsdn! Looks clean and includes a rebuilt engine, says the seller. This car is fairly local to me and I’d be happy to take a look for an out-of-town HAMB’er. $3,500



https://www.facebook.com/share/15tNwnp5bS/?mibextid=wwXIfr

 

56 Chrysler Windsor Deluxe 4-dr. $2900
Elyria OH
https://www.facebook.com/marketplace/item/1716190446000228/?

 

Boy this Chrysler really does it for me! Looks very solid as well. Surely someone will grab this? Based on the price it's probably a poly and not a hemi??

 

Pictures show a poly. It also says runs & drives. It's a good start for a classic ride, even if it's not a popular body style.

"NO TRADES,NO LOW BALL PRICES OR STUPID QUESTIONS. Car runs and drives,fresh engine and fuel system, great car to restore or drive as is,I have extra parts including a windshield and rocker pannels,need to get rid of I have to many projects,price is negotiable but not much,does need some brake work,has a record radiator, decent tires,has decent exhaust ,engine is a 331 Holly 2 barrel,2 speed powerflight Trans, pick up only in elyria ohio"

 

This one is in Oldsmar, Florida.

 

Custom rat rod hearse ? https://rapidcity.craigslist.org/bar/d/owanka-custom-rat-rod/7834952865.html

 

Looks to be a clean '41 Deluxe.

https://www.purplewave.com/auction/...e-Passenger_Vehicles-Passenger_Vehicle-Kansas

 

that hearse, Oh My!

 

Windsors, being the lowest trim line, were usually polys (which ain't a bad thing in itself).

 

I do believe that's a 55 by the tail-lights