Hot Rods THE INDUCTION THREAD

Smacks of early Ramchargers.

 

As much as I normally dislike fake stuff, I thought this was worth posting:

 

That is nice, very well done. Just my opinion. I like it.

 

Something you might hear down at the local watering hole..............
My brother in law had one just like that! NOT




Article

Here:
https://www.chevyhardcore.com/news/rare-fuel-injected-409-in-1962-impala/

 

THAT was a fun bit of history--wow and thanks!

 

M-335 intake manifold......

 

Here's a Holley carb that has 1-9/16" primaries and 1-3/4" secondaries...Rated at 725 cfm.. This would be a great carb to play with.. Swap out the rear metering plate for a block and add the performance fuel bowls and get it tuned for some street fun....
These were used by Chrysler between '70-'72.... I have one in my stash...

 

Guessing driven off the cam with bevel gears and shaft?

 

Any chance the heads and intake would bolt up to a Y block?????.....

 

Seen this Offenhauser with sideways mounted carbs, I thought I tried that and the throttle shafts were bumping into each other, or the throttle shaft bumped into the distributor cap.
Whichever it was it didn't work for me.

 

Also seen this Scorpion II, wonder what the difference is as compared to a regular Scorpion



My regular Scorpion

 

It all looks good until you go to stab the distributor in and it hits the choke lever.

 

This was in Bowling Green this past weekend

 

Interesting, somebody was very industrious.

 

Spotted this at Carlisle Ford. I love seeing these worn and torn multi carb setups. It makes me think of late nights in the garage.

 

Ok, I'll bite, whatzit?

 

Not real sure. Looks like half of a small block Ford. Maybe in a midget

 

guy must have been smokey's son in law....

 

A friend of mine had this 3D printed to fit a big block chevy Weiand crossram.
It's a carb spacer / cross over tube to help balance the 2 individual sides, designed to resemble an old school part, he plans to paint match it to the aluminum intake.

 

That's cooler than the back side of the pillow on a hot July night!

 

Pretty wild! I'm groovin' on the Eelco valve covers! Rare stuff.