Its official HAMBANDY is a hot rodder

Once I get some word on the seats and what style Andy would like, I'll get in touch with you. I appreciate the offer and I'll bet Andy does too.

 

What does Andy want to go with for an engine?

 

I do believe he's already got a flathead for the project.

 

good on Doc indeed.

 

Nice Job fellas. If there is a list of items that are needed, let me know to help this GREAT cause! Good LUCK Andy! hang in there.

Ken

 

Let's get a bill of materials going as a sticky - let folks cover and/or provide parts as needed. I've got a set of gauges I can kick in - if needed...

 

nice engine,but it's gonna need a whole lot more carbs and chrome stuff

 

Too bad I sold my 3 Holley 94's or I woulda kicked them in, they woulda looked sweet on that flatty!

 

I'll pledge two matching 94's. If someone will rebuild them I'll gladly pay shipping to them and then on to Andy. I've got several matching pairs maybe someone will be willing to kick in another to make a triple? If your interested let me know what you've got and I'll see if I have two matching.

As I posted on another thread..
We need a new sticky parts/labor list.

 

Sweet. My faith in humanity has been restored.

 

I have a set of early KH wire wheels 4 ya( 16X 4 1/2 ,5 by 5 1/2 bolt pattern) ....just get me an address and I'll get them there

 

this is great doc ! and all involved ! I would be proud to go thrue those carbs, and look thrue my collection of misc stuff.
if I have anything on the needed list Ill pitch in!
sound`s like a hamb chop is in order to me ? hint hint say no more !
send me those carb`s Casey`s Custom`s 32308 RR12 dripping springs texas 78620 (512) 825-5547
I can rebuild those things in my sleep ! and have got the power valve. thing down, thank`s to the hamb and a lot of trial and error ?

 

I have an Offy super dual to go with the matched carbs, I will kick in for Andy. I also have a pair of cleaners I send along. Whats the address?

 

Casey,

I,ll send the intake, fuel block, and cleaners to you. Hopefully you can mount and work up some linkages and fuel lines for Andy.

Jim

 

ok Jrblack30 just called me and is sending me the intake I will rebuild the carbs set up the linkage and through in a intake gasket!

 

At the risk of making anyone the slightest bit upset, could I suggest that no one else offer up parts or money until an official list gets stuck up top. This is gonna get real confusing, real fast. Give the Mods some time...

vance

 

I wonder if we have a qualified polisher on the board who would be willing to donate his services? Hmmm...

I'm going to go grab a set of carbs right now and I'll send them out in the morning.

 

I'll donate rebuilds on any of the electrical equipment if someone will send me the cores.

 

This sounds like a good idea. We've got carbs, intake and linkage taken care of at this point. Sounds like a good start.

 

Vance,

I am donating the dual intake, cleaners, and fuel block. I will hold until contacted. Let me know where and when to send as needed.

Jim

 

unless sombody`s got a extra blower and manifold! ?..................

 

I have a set of headers for the flathead. Let me know if you want them.

 

I will get the list posted right now!

This thing is *********** (northern term ) out of control. After i post the list i will updat you and Andy.


Regards
Leon

 

Damm we were half way to Bonneville and on a roll before you chimed in Mr project killer ?
how could this be a bad thing ? if he dosen`t wind up using it ,
it could go in a auction to help the build! or trade for thing`s he dose need.
and every one that wanted to help and donate ! has helped weather he use`s it / need`s that part ? or not! I stand by my offer to help Casey.
and let`s keep this train rolling !.......

 

94 Guys, advice needed. Here is what I've got I'm not sure what will work the best together. Tell me what to send and I'll send it out.

Carbs
1. On the float bowl 8BA, on the body 15/16
2. On the float bowl nothing, on the body a blank circle
3. On the float bowl 91-99, on the body 15/16
4. On the float bowl 59, on the body nothing
5. On the float bowl EAB, on the body 15/16
6. On the float bowl 59, on the body 15/16
This carb has a weird 4 bolt base and a different linkage but I thought I'd post it anyway.

 

Hey Mov'n, Is tha car going together on The Rock? Looking forward to seeing the parts list - I'm sure to have something you'll need. This is great stuff - Thanx

 

Put me in for a complete wiring harness. Just let me know where to send it. That thing won't move without a heart. And if you need any parts for the carbs HRA, just holler I got em'. I don't give a damn what it is for a 94, I got it. I agree with HRA, let's keep this "train a movin'".
the ****ster

 

Bars 51, send him #1 and #3 and the top off #4. Then he will have matching tops as well as extended throttle shafts on both.
the ****ster

 

sweet!!!

 

3 and 4 are the closest match the 15/16 will all flow the same with the same jet`s and power valve`s ,
that last one number 6 is a Commie carb they fit vw`s and fibergl*** cars!