Features 48-54 Chevy/GMC trucks! lets see em ALL!!!

Did you find that truck on Craigslist in Portland? I think I saw it there or maybe eBay?

Since the axle is under the springs simply removing a leaf lowers the truck the thickness of the leaf, plus reduces the amount of support the springs offer. It will come down if you remove leafs. However, these trucks swap a lot in corners already, and removing leafs reduces roll stiffness. You may find it scary in corners unless the swap bar is in place and working well.

 

A couple updated pics.

 

Actually I did get it on craigs list. Came from down your way. by chehalis. Traded for it last week and got it home just last night. Want to lower it without subframeing it for now.

 

Great find. I love my Suburban and have a 1-ton panel also.

 

don't mean to hijack the thread but............ i have a 53, i'm a tall guy, 6'1 should i take the seat riser out? or what have you guys done about the seat, original is gone. also the gas tank, have most of you moved it,if so what did you use and where did you mount it. pics? any help will be appreciated. b.a.king

 

Snag a seat out of a 88+ Chev full size. The doors will touch the front corners off the seat....but not too bad. If the tank is out of the cab the seat can move way back. When I had my seat reupholsterd I just had them trim the front corners a little bit. Fits good and comfy.

 

Here's my '49 I purchased off of Ebay a few months back....Might end up selling her....which is too bad...the truck is complete.....just not enought time and $$ to do what I would like to with her!

 

Owned since 1993, Lots of new goodies going on this one soon.
Great thread!

 

1955 1st series we are building.
S10 chassis,Big Brakes,Air Ride, 650 hp Blown SBC under the hood,20s and 22s

 

i can't wait to start on my 52, but i have to finish and sell my 71 first.

 

Here's a picture of my 49

This is my dad's truck

 

I picked up this 51 a couple of weeks back. I'm so stoked, I have wanted one since I was a kid.

 

Just like the energizer bunny this thread just keeps going. And thats fine with me as I am a 47-54 AD truck fanatic.

Keep'em coming guys.

 

i'm pretty sure i saw that sub. at goodguys last year. and i love it

 

Here's a '54 Chevy project just outside San Antonio that needs a new home. That's a 454 sitting on Chassis Engineering engine mounts with a 700R4 case used to mount the CE trans mount. New inner and out cowls, Direct Sheetmetal firewall and floorboards, plus a 9" Ford rearend are included in this deal. Screams for a tilt one piece front end to replace the missing front sheetmetal, it was my intent to get one of those for it if I built it. PM me and come get it. Very reasonable price considering what I am offering. I just have too many projects ahead of it so it needs a new home. If you have a set of 16 X 8 Torque Thrusts 5X5 bolt pattern sitting around, I will take them on a partial trade 'cause that is what I'd probably buy for my '65 'burb if I sold this.

 

Here is my 49 Pick up , I wanted to build it but something else has caught my eye....So it's on the Market. If anybody is interested you can check it out in the Classifieds section of this site.

 

Its from the early 90's when I built it, but here is a pic of mine. 400 sbc and turbo350, Camaro rear and mustang II front. drove thehell out of it for a couple years before it went to a new owner

 

Nice tread,
Did not see any COE trucks do. So here is mine.
1972 GMC 1/2T Chassis air ride buick 455.

 

Sweet COE Koos. Where in NL are you? I go to Belgium for work now and again and cut across NL on my way to Aachen and get around Antwerp when I can. I'd love to see this live! Still thinking of an overnight at Amsterdam when I fly out just to see all of the cool cars around there.

 

How bout a couple pics from the midwest......

 

Here's my 49.

 

Here is my suburban. Extreme make over coming soon after I sell my 68 camaro.

 

Hello Danimal,
Thanks for the compliment. I live up north of the netherlands in A small place calt Oude Pekela. Jou are more than welkom to visit me.
Wat do you do fore work over here?

 

here are the pictures from the previous owner.. I just picked up and Plan on slamming it with MII front and C notch.. Lots of frame work to come.. Its my first project and Im ready for the challenge, have to learn some time right.!!!

 

Whats up? I am new to this site but here are some pics of my 54 chevy.

 

Here's a couple more pictures of my 49. It started out as A 2 ton. It now has a s10 frame with a 305 and three speed auto.

 

here's a few picks of mine. 1950 in the background is the one i'm working on now i'll post those pics also

 

The Speedwagen parts hauler has been
in the Stable since 1980. Its got a 235
with a 55 rear and a saginaw tranny. It
might not be to fast, but it is good and slow