Register now to get rid of these ads!

More On Instrument Panels

Discussion in 'The Hokey Ass Message Board' started by Ryan, Feb 7, 2008.

  1. Ryan, thanks for the 29 Chevy panel,now i wish i hadn't traded mine to a restorer. And this other is from a Kaiser Darrin(the one with sliding doors)
     

    Attached Files:

  2. wannabewannabe
    Joined: Sep 1, 2005
    Posts: 259

    wannabewannabe
    Member


    I meant to ask this of Ryan.
     
  3. mcload
    Joined: Apr 20, 2007
    Posts: 539

    mcload
    Member

    [​IMG]

    Cool looking gauge; IMPOSSIBLE to read!!

    Patrick
     
  4. lowsquire
    Joined: Feb 21, 2002
    Posts: 2,567

    lowsquire
    Member
    from Austin, TX

    This is going in my 32 truck. REO wolverine gauge panel. not sure if Ill try and restore the speedo, or mount the speedo elsewhere and use the funny shaped hole for switches/warning lights, the round holes will have SW block gauges.
    [​IMG]
     
  5. valkokir
    Joined: Oct 25, 2007
    Posts: 196

    valkokir
    Member
    from DeKalb, IL

    I'm rebuilding mine right now, it's gonna look sweet. Haven't decided what to use for the mounting oval yet, I may keep the original but brushed stainless is more likely. I love the original gauges. They are on ebay all the time, you can always go back, thats where I got spare parts from.

     
  6. Bookz
    Joined: Feb 8, 2007
    Posts: 221

    Bookz
    Member

    Ryan you've done it again. I certainly recommend the book mentioned earlier. You would love it.
    The dash you thought was Bugatti is I think Talbot going by the far left gauge. Bugatti nearly always had a engine turned dash. What does have me curious is the the Tach seems later. It is very small for that era and the adjustable tell tale also points to later.
    Going by the material on the seat the silver car is Mercedes mid 50's.
    Mercedes, Porsche and BMW have always been leaders in dash design and if you look at a mid 60's dash and a late model one they have changed very little and most controls are in the same place. I suspect it is one of the reasons they have such good customer loyalty. When you update you immediately feel familiar with the car. The other thing they do well is making switches etc feel great to use. This is one of the areas where MB cocked it up in the mid 90's when they lowered the quality. I sold a 92 190E 2.6 and bought a 98 C280 and hated it because the indicator switch felt cheap and nasty (Japanese). It pissed me so much I sold the car and bought a 94 E320 Coupe which was the last built before they dumbed down.
    In the mid 90's Fiat bought out a lovely Coupe with a very simple painted dash and it looked stunning.
     
  7. sodbuster
    Joined: Oct 15, 2001
    Posts: 5,057

    sodbuster
    Member
    from Kansas

    Ryan,

    I know that you are a book collector.........have you seen the book "Dashboards, by David Holland". Jen bought it for me a couple of years back for a gift, and it has a TON of photos and descriptions of the cars dashboards in it.

    'Dashboard n. a board or leather apron in front of the vehicle, to prevent mud or stones from being splashed or flung up upon the interior.'

    Chris

    I guess that I should have read the post first.........the first reply was for the book........now I feel like a fool. Oh well.
     

    Attached Files:

  8. kaydub
    Joined: Apr 26, 2007
    Posts: 370

    kaydub
    Member
    from Cali

    Always liked the gauge panel in Alan Button's 32 3w. Looks very classy in the car. Pretty neat idea with the needles making the V8....

    [​IMG]
     
  9. autobilly
    Joined: May 23, 2007
    Posts: 3,403

    autobilly
    Member

    These are beautiful!
     
  10. Scott K
    Joined: Oct 17, 2005
    Posts: 824

    Scott K
    Member

    A few from Pebble Beach this year

    32 Chrysler Imperial
    [​IMG]

    35 Auburn
    [​IMG]

    38 Peugeot
    [​IMG]

    ok - not an I.P., but cool from a pre-war Sunbeam race car
    [​IMG]

    34 Packard
    [​IMG]

    29 Ruxton
    [​IMG]


    L-29 Cord
    [​IMG]
     
  11. HHRdave
    Joined: Jul 31, 2006
    Posts: 1,068

    HHRdave
    BANNED
    from So Cal

    A few from Pete Eastwood's Holiday tour.............

    [​IMG]

    [​IMG]
     
  12. mcload
    Joined: Apr 20, 2007
    Posts: 539

    mcload
    Member

    Okay, try this:

    [​IMG]
    1912 Rolls Royce
    [​IMG]
    1924 Bentley
    [​IMG]
    Duesenberg
    [​IMG]

    Patrick
     
  13. Mercmad
    Joined: Mar 21, 2007
    Posts: 1,383

    Mercmad
    BANNED
    from Brisvegas

    What is really amazing about thses mercedes is that this is the quality standard to which they were built,it's not a chainer restorers take on it. The bottom part with switches is a die casting and the panel are all one peice.
    [​IMG]

    The 300SL roadster was equally lush inside ,this is one next door to me.
    [​IMG]
     
  14. 36C8
    Joined: Sep 8, 2006
    Posts: 326

    36C8
    Member

    The L-29 Cord dash is actually 34 Packard, the one labeled 34 Packard is 1936. I've owned both.
     
  15. von Dyck
    Joined: Apr 12, 2007
    Posts: 678

    von Dyck
    Member

    The Studebaker Silver Hawks were simplicity at its best during an era of garish, ostentatious, many times ugly dashes of the late 50's American cars. A simple engine-turned panel with S-W's in front of the driver. For homebuilt panels, gauge placement is critical in order to "pull it off". Too far apart or too close together can ruin an otherwise good looking dash panel.
    Yeh! The Mercedes has it - it is pleasing to the eye.
     
  16. Scott K
    Joined: Oct 17, 2005
    Posts: 824

    Scott K
    Member

    Grabbed the wrong pict for the L-29 Cord, here's what it really looks like.

    [​IMG]

    and for a bonus, a 37 Delahaye
    [​IMG]

    and the Blitzen Benz
    [​IMG]
     
  17. myke
    Joined: Dec 13, 2004
    Posts: 2,134

    myke
    Member
    from SoCal

    great pictures!
     
  18. RidgeRunner
    Joined: Feb 9, 2007
    Posts: 906

    RidgeRunner
    Member
    from Western MA

    Fuel sight glass in the lead in photo looks very similar to those used on EMD GP series locomotive fuel tanks. Probably from same supplier and used on quite a variety of equipment over the years.

    Keep both sides of the glass clean and they are much easier to read. Remove the inner ring to take out the glass for backside cleaning [make sure the fuel level is below the level of the sight glass before removing if the gauge isn't valved].
     
  19. I've only just seen this post as I was in Hospital with Pneumonia this past week.

    Dodge Special
    [​IMG]
    Bugatti
    [​IMG]
    Can't remember
    [​IMG]
    Maybach Special
    [​IMG]
    Delage
    [​IMG]
    Terraplane (?) Special
    [​IMG]

    my absolute Favourites
    1954 Alfa Romeo
    [​IMG]
    [​IMG]
    & Talbot Lago Figoni & Falaschi Teardrop Coupe
    [​IMG]
     
  20. Here's a pic of the aluminum dash I've made for my model A...it's not quite finished, still needs a switches etc. I made a hammer form from some plywood to get the right shape.

    [​IMG]
     
  21. owen thomas
    Joined: Jun 15, 2008
    Posts: 186

    owen thomas
    Member

    Chris Craft
     

    Attached Files:

  22. scootermcrad
    Joined: Sep 20, 2005
    Posts: 12,383

    scootermcrad
    Member

    This is the best thread EVER!!!
     
  23. neatoldclassics
    Joined: Mar 1, 2008
    Posts: 187

    neatoldclassics
    Member
    from Montana

    Just got this off eBay gonna use it in my 1927 REO coupe
    (even though it is not the wolverine model). REO gauge cluster.JPG
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.