Register now to get rid of these ads!

Projects What are the winter projects for this year? ~~2008~~

Discussion in 'The Hokey Ass Message Board' started by lockwoodkustoms, Sep 9, 2008.

  1. SlowandLow63
    Joined: Sep 18, 2004
    Posts: 5,958

    SlowandLow63
    Member
    from Central NJ

    Get my shoebox subframed and the motor/trans built and in. Pulled the front sheetmetal off this passed Sat so I'm already on a roll. If I end up ahead of the game, start on the rear suspension. I'm keeping my fingers crossed.
     
  2. Old6rodder
    Joined: Jun 20, 2006
    Posts: 2,546

    Old6rodder
    Member
    from SoCal

    Winter? :confused:


    As each year, I'll be thrashing for a couple months straight on Sierra Madre's Rose Parade float while my own projects languish in forgotten sorrow.
    Then a couple weeks off to recuperate after the parade and I'll get back to whatever it is I call a life again.
     
  3. Jarred Hodges
    Joined: Jul 30, 2008
    Posts: 564

    Jarred Hodges
    Member

    I plan to redue the brakes on my 51 and start the bodywork, have the heads redone on my 69 F-100 and upgrade the ignition.
     
  4. deadendcruiser
    Joined: Jul 18, 2007
    Posts: 691

    deadendcruiser
    Member

    1956 Buick: Tear it back down, wet sand:( and spray some green flake on it. Finish smoothing my chrome parts and spend my tax return having everything made shiny again:eek:. lower it. and try to fix a few leaks.
    1960 parkwood: Swap motor and tranny. Give it power brakes..
    yeah my winter is already booked.
     
  5. SlamCouver
    Joined: Jun 26, 2006
    Posts: 2,000

    SlamCouver
    Member
    from Brazil, IL

    my winter projects are just the same as my summer ones.
     
  6. COS
    Joined: Dec 14, 2006
    Posts: 729

    COS
    Member
    from KCMO

    Starting on my tom. night!! Found a shop I can use for $100 a month welder and plasma included!! So the list goes...

    1.MII front w/bags
    2.Finish Body Bods (mold rear fenders, flush mount skirts)
    3.47 Caddi Bumpers front and rear
    4.Get ready for shinny roof and sealer primer lower!!

    Good luck to all!!
     
  7. touchdowntodd
    Joined: Jan 15, 2005
    Posts: 4,068

    touchdowntodd
    Member

    paint for my frame and suspension... fix lil things i dont like, etc...

    then work on the wifes new secret project
     
  8. kustomizingkid
    Joined: Sep 6, 2008
    Posts: 225

    kustomizingkid
    Member

    I wish I had a classic to work on... but at least I'm working on an American car this winter.....

    Going to strip the under body and take care of all the rust on my Lincoln Mark VIII before it gets any worse, POR15 to the rescue.
     
  9. zman
    Joined: Apr 2, 2001
    Posts: 16,790

    zman
    Member
    from Garner, NC

    the 38 buick is next on my list....

    [​IMG]
     
  10. I'd like to make a pass down MoKan next year in this if I'm not too busy this winter.
    Don't gimme any lip---it's a 63, so it's HAMB-friendly :p

    [​IMG]
     
  11. Dirt Diggler
    Joined: Aug 3, 2007
    Posts: 366

    Dirt Diggler

    here's my jalopy. Just brought her home today. Its a 49 GMC Suburban. Hooray for junk!!!!

    [​IMG]
    [​IMG]
    [​IMG]
     
  12. Awedrod
    Joined: Aug 29, 2006
    Posts: 156

    Awedrod
    Member
    from Wichita KS

    Finding an old truck that is way too cool to pass up on the HAMB. Excellent.
    Getting my Dad to help go get it. Great.
    Telling my teenage boys that we finally have a winter project. Awesome.
    Explaining all of this to the wife.....priceless
     

    Attached Files:

  13. Brandi
    Joined: Sep 1, 2007
    Posts: 1,041

    Brandi
    Member

    My goal is to yank the 235 out of this and get the Nailhead in it and do some little body mods to have it ready for paint by June.

    [​IMG]
     
  14. mikhett
    Joined: Jan 22, 2005
    Posts: 1,582

    mikhett
    Member
    from jackson nj

    My 54 merc ht. Gonna be a mild custom, lake pipes ,White tuck&roll, SBF, c4 tranny,vintage air wide whites (wife likes em). The 62 galaxie is about ready for paint. Did i say i work SLOW! The gal only took 4 yrs.
     

    Attached Files:

  15. 29paul
    Joined: Dec 30, 2007
    Posts: 267

    29paul
    Member

    Finish my 29 but 2 weeks of bowhunting in Ohio will not help.
     
  16. zman
    Joined: Apr 2, 2001
    Posts: 16,790

    zman
    Member
    from Garner, NC

    No lip, I want... :D But I'll settle for seeing you tool down the track.
     
  17. Lucky77
    Joined: Mar 27, 2006
    Posts: 2,497

    Lucky77
    Member

    Get going on the roadster and decide weather or not to keep the fenders. The rear chassis step is done but I have to figure out which flathead I'm going to use before I do the motor and tranny mounts. I'm working on perch pin removal and wishbone modification tonight.
     

    Attached Files:

  18. Robert gilbert
    Joined: Dec 28, 2007
    Posts: 927

    Robert gilbert
    Member
    from boston

    100_1148.jpg 1934 ford hemi powered truck . Ive already started but it is a winter project
     
  19. Pothole 31A
    Joined: Dec 15, 2007
    Posts: 318

    Pothole 31A
    Member

    Well pretty much just finish this ride.... put the motor in wire it fix brakes and gas it up and go!!!!!!!

    [​IMG]
     
    Last edited: Sep 9, 2008
  20. cowboy1
    Joined: Feb 14, 2008
    Posts: 914

    cowboy1
    Member
    from Austin TX

    Getting my front clip done and start working on getting the rockers and floors replaced
    [​IMG]
     
  21. A-Wall
    Joined: Aug 6, 2008
    Posts: 488

    A-Wall
    Member

    Get my 36 done for the detroit Autorama.

    [​IMG]


    Motor and tranny swap, and fix some bugs out on my Elcam.

    [​IMG]
     
  22. GoManGo1951
    Joined: Jul 30, 2008
    Posts: 228

    GoManGo1951
    Member

    All new steering and front end parts, brakes, new engine and clutch and the fun one..........Glass!!


    [​IMG]


    [​IMG]


    [​IMG]

    [​IMG]
     
  23. L. Eckart
    Joined: Jul 8, 2005
    Posts: 643

    L. Eckart
    Member

    My hope is to get the 56F100 chassis to the point I can sell that project and get started on the newly acquired 41 Ford Convert. Yeaa Ha!
     
  24. droplord49
    Joined: Jan 12, 2004
    Posts: 1,704

    droplord49
    Member
    from Bryan, Tx

    Finish up the body work and prime, do a drivetrain swap, install glass, rewire, and all the other odds and ends to get the 51 on the road.
     

    Attached Files:

  25. Psychoholic
    Joined: Nov 10, 2005
    Posts: 70

    Psychoholic
    Member

    I'm starting on my '51 Buick.
     

    Attached Files:

  26. cowboy1
    Joined: Feb 14, 2008
    Posts: 914

    cowboy1
    Member
    from Austin TX

    That's it?!?!
     
  27. flnudistcpl
    Joined: Jul 2, 2008
    Posts: 112

    flnudistcpl
    Member

    We're gonna finish fixing a bad start on a chop top and let the wife decide what she wants to build. Gonna go get the other 34 we found very close to us. so now we can have a his and hers.
     

    Attached Files:

  28. axeman39
    Joined: Jan 15, 2006
    Posts: 423

    axeman39
    Member
    from Saco Maine

    I hope to be driving my 39 by the 4th of July[​IMG][​IMG]
     
  29. Bull
    Joined: Mar 17, 2006
    Posts: 2,288

    Bull
    Member

    Rebuild this:
    [​IMG]
    [​IMG]

    And this (a result of the former pics):
    [​IMG]
     
  30. frankenstein1948
    Joined: May 23, 2008
    Posts: 713

    frankenstein1948
    Member

    My 30 model a sedan that my dad and I are working on together.
    I also planned on finishing the rebuild of my 62 chevy 2 drag car but that may be on hold as my wife was laid off from her job of 13 years.:mad:[​IMG]
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.