Register now to get rid of these ads!

Model Car Sunday

Discussion in 'The Hokey Ass Message Board' started by DakotaJohn, Jan 11, 2009.

  1. I didn't see where anyone had started aModel Car Sunday thread so I will start it with this
     
  2. kscuda
    Joined: Jun 27, 2008
    Posts: 241

    kscuda
    Member
    from olathe, ks

    Here is one I started awhile back. Do not really like the way it looks when sitting on the funny car chassis so am going to modify a pro mod chassis
    to mount it on
    [​IMG]">
     
  3. kscuda
    Joined: Jun 27, 2008
    Posts: 241

    kscuda
    Member
    from olathe, ks

    This is what I felt like doing when I mounted the Mooneyes body onto the
    funny car chassis and realized how bad it really looked.
    [​IMG]">
     
  4. Omega
    Joined: Jul 11, 2006
    Posts: 874

    Omega
    Member
    from Mass

    I had a old project -1964 c10, that got creamed on my work bench from a diecast falcon rolled off and smashed it! So I made a truckster from it.. Am i green is I recycle old projects? :D

    [​IMG]Hosted on Fotki

    [​IMG]Hosted on Fotki
     
  5. This is something that i got at a swap meet and it was chopped bad so i redid it and just used some parts that were lying around to make a chassis. Hopefully the rear which is four linked will be poseable. Not sure on motor but i do have a lonely sbc with webers sitting on the desk
    [​IMG]
     
  6. Big Dad
    Joined: Dec 20, 2005
    Posts: 4,832

    Big Dad
    Member

    Anyone but me old enough to remember these magazines from 70-71 ?

    I've digging thru my old magazines and found them
     
  7. Omega
    Joined: Jul 11, 2006
    Posts: 874

    Omega
    Member
    from Mass

    Ive always heard of model car science, never read them though..that was 10 years before me!
     
  8. wvenfield
    Joined: Nov 23, 2006
    Posts: 5,627

    wvenfield
    Member

    Yeah, I always dug seeing what others were building. The show winners were always cool to see. I had a subscription and I still have a few.
     
  9. Ghost28
    Joined: Nov 23, 2008
    Posts: 3,195

    Ghost28
    Member

    This is not a model I built. But a good friend completed it quite a few years ago. And just recently made a gift of it to me. I think the detail in the car is quite good for being made out of modeling clay. He now builds models in matchbox scale or less. And I will try to get some pics for you guys for next week. I don't know how he works in the small scale that he does now cause (I CAN BARELY SEE THEM) THANKS...ghost
     

    Attached Files:

  10. bumpercarkid
    Joined: Aug 28, 2007
    Posts: 226

    bumpercarkid
    Member
    from Orion, MI

    I always enjoy looking at these posts. As usual the cars are looking good.
     
  11. bustedlifter
    Joined: Jun 26, 2005
    Posts: 756

    bustedlifter
    Member


    I remember them. I used to go to the newsstand about every other day to see if the new issue was out.
     
  12. Big Dad
    Joined: Dec 20, 2005
    Posts: 4,832

    Big Dad
    Member

    Anyone think they are worth anything ?
     
  13. wvenfield
    Joined: Nov 23, 2006
    Posts: 5,627

    wvenfield
    Member

    They used to bring O.K. money but the market has become a bit more satuated as of late.

    They are certainly worth more than throwing them away. More than when new.
     
  14. Big Dad
    Joined: Dec 20, 2005
    Posts: 4,832

    Big Dad
    Member

    3 to 5 bucks maybe ?
     
  15. Gizzy
    Joined: Jan 20, 2008
    Posts: 769

    Gizzy
    Member
    from N.W,Ohio

    I built this a couple winters ago. Giz':rolleyes:
     

    Attached Files:

  16. dustyfoo
    Joined: Jan 7, 2009
    Posts: 1

    dustyfoo
    Member
    from glendale

    heres two 49 im building
    [​IMG]
     
  17. junk fiend
    Joined: Sep 16, 2008
    Posts: 430

    junk fiend
    Member

    i made some nice models a few years ago but i tore them all apart and made slotcars out of the bodies
     
  18. lanny haas
    Joined: Nov 1, 2008
    Posts: 560

    lanny haas
    Member
    from Phoenix AZ

    Here is a dirt car Im working on. Again.. I let it sit for a while but now time to finish it
    [​IMG]
     
  19. DocWatson
    Joined: Mar 24, 2006
    Posts: 10,288

    DocWatson
    ALLIANCE MEMBER

    Some cool builds people, that Modeling Clay T is awesome, now thats scratch building!!
    Skinanbones, I have a half finished one of them, it has been chopped and the hood pancaked but its been dropped and is coming apart, your welcome to it for postage? If you want I will dig it up and take a pic for you. Its one of the kits I couldn't sell, no one wants built ups or partial built ups!

    Heres where Im up to on my Fuel Coupe, a quick mock up, still need to finish the body and cut out the wheel wells. The front end is borrowed from another model just to see what it all looks like. I wasn't sure about the 421 Poncho with the Potvin blower until now, I like the look.
    [​IMG]
    [​IMG]

    This is a stock 32 body between the Fuel coupe and another one I chopped. This shows just how much work has gone into the FC body!
    [​IMG]
    Doc.
     
  20. gowjobs
    Joined: Mar 5, 2003
    Posts: 776

    gowjobs
    Member

    I put this one together a little while back.
    [​IMG]

    Gotta finish this one before the end of February:
    [​IMG]
     
  21. Omega
    Joined: Jul 11, 2006
    Posts: 874

    Omega
    Member
    from Mass

    Sweet Doc! Its nice to see you showing some progress every week :)

    What a difference in the size of the body..thats rad man.
     
  22. thesupersized
    Joined: Aug 22, 2004
    Posts: 1,367

    thesupersized
    Member

    a friend of mine built these... the pictures don't do them justice.

    [​IMG]
    [​IMG]

    [​IMG]
    [​IMG]

    [​IMG]
    [​IMG]

    [​IMG]
    [​IMG]
     

    Attached Files:

    • 6.jpg
      6.jpg
      File size:
      42.1 KB
      Views:
      107
  23. Stick Shift
    Joined: Oct 2, 2005
    Posts: 2,558

    Stick Shift
    Member
    from LENA IL

    There a bunch of great models this week. Glad to see gowjobs post some pics. Doc that one is coming along nicely too. The chev modified is cool. It makes me think about building something similar.

    Nothing new from me this week. Just slowly working on some long term projects.
     
  24. gcwred
    Joined: Dec 11, 2008
    Posts: 24

    gcwred
    Member

    These are great looking pictures of you guys cars. Makes me want to get back into modeling. I have offen wonded if people still build models. Great to see they do. GCWRED
     
    Last edited: Jan 12, 2009
  25. DocWatson
    Joined: Mar 24, 2006
    Posts: 10,288

    DocWatson
    ALLIANCE MEMBER

    Thanks Ryan, I have a bit of down time at the moment so I can do some stuff!
    Hey Supersized, can you ask your mate what paint he used on the 'Beach City Chevrolette' Vette funny please? They are nice builds.
    Doc.
     
  26. thesupersized
    Joined: Aug 22, 2004
    Posts: 1,367

    thesupersized
    Member

    It is a House of Kolor color over a silver base. It is a resin body..
     
  27. 60srailjob
    Joined: Nov 14, 2008
    Posts: 1,218

    60srailjob
    Member
    from nowhere

    I worked on one this past weekend WILD WILLLIE BORSCH funny car from 1973. One my son got me for Christmas which I had in 1973. My son worked on his GENE SNOW from 1975.Its fun, when its cold outside and our shop dont have heat....so we build models....
     
  28. DocWatson
    Joined: Mar 24, 2006
    Posts: 10,288

    DocWatson
    ALLIANCE MEMBER

    Thanks for that!!:D
     
  29. rocketrider
    Joined: Sep 29, 2006
    Posts: 38

    rocketrider
    Member
    from Moline, IL

    Not that I come in here much. But i decided to try and get one as close to being done as possible, figure I would post it. The digital pic color is a little off:

    [​IMG]
     
  30. DocWatson
    Joined: Mar 24, 2006
    Posts: 10,288

    DocWatson
    ALLIANCE MEMBER

    Rocketrider, all Im getting is a red X.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.