Register now to get rid of these ads!

corn fed elephant lives!

Discussion in 'The Hokey Ass Message Board' started by bobwop, Sep 8, 2008.

  1. Tony
    Joined: Dec 3, 2002
    Posts: 7,351

    Tony
    Member

    Like a hawk i watch the progress of this car! :)
    Look's great..Can't wait to see it all finished up next to the Olds..
     
  2. Spot_remover
    Joined: Dec 4, 2008
    Posts: 243

    Spot_remover
    Member

    just be careful where you point that thing. LOL looks nice n angry
     
  3. Nice setup, should rock. You've been racing at GLD off/on for years right, don't you have a '56 Chevy too?
     
  4. bobwop
    Joined: Jan 13, 2008
    Posts: 6,135

    bobwop
    ALLIANCE MEMBER
    from Arley, AL

    Yup, that's me, John. Disease and it is full blown and terminal. Also have a 68 Nova that has run at GLD for FORTY years and a 65 Coronet that runs 10's. Like a stated, I have the disease and it is BAAAD.

    Looks like your Merc is coming right along.
     
  5. DE SOTO
    Joined: Jan 20, 2006
    Posts: 3,857

    DE SOTO
    Member

    Why an Automatic ???

    In the movie the car had a 4spd.
     
  6. bobwop
    Joined: Jan 13, 2008
    Posts: 6,135

    bobwop
    ALLIANCE MEMBER
    from Arley, AL

    there were three cars used to make the movie, so which one do we mimic?. We decided to go with an auto for cost and simplicity. Granted, the four speed would have been cool, but after discovering the Matador squad cars in our local salvage yards had GM 427 mystery motors and not hemis, we acknowledged we couldn't be 100% correct anyway.
     
  7. bobwop
    Joined: Jan 13, 2008
    Posts: 6,135

    bobwop
    ALLIANCE MEMBER
    from Arley, AL

    Just another update. We are making progress, but it doesn't look like much. The body mounts are fabbed, the steering was installed, the starter is installed (that was a full day of grinding), the trunk floor was replaced, the tranmission tunnel was built and an integral blow shield incorporated. It will start moving faster now. Seats will probably be next. Most likely going with Speedway's hotrod seats. Slicks will be ordered tomorrow. M&H Racemasters, of course. Going with some 11.5x31's. We are hard at it!
     

    Attached Files:

  8. DRUGASM
    Joined: Dec 16, 2008
    Posts: 2,817

    DRUGASM
    Member

    lookin good. i think this thing would be******in on the street. i would love to see the look on the kids face when you rumble up next to his civic at the red light,......
     
  9. I SMELL SMOKE
    Joined: Mar 6, 2008
    Posts: 1,527

    I SMELL SMOKE
    Member

    very cool car!!!!!! you are a lucky man!!!!!
     
  10. swade41
    Joined: Apr 6, 2004
    Posts: 14,397

    swade41
    Member
    from Buffalo,NY

    It'll be like the terrible two-some in your garage, a Christmas tree in the middle and you'll be all set. That's a nice pair of cars you got.
     
  11. bobwop
    Joined: Jan 13, 2008
    Posts: 6,135

    bobwop
    ALLIANCE MEMBER
    from Arley, AL

    thanks for all your compliments and encouragement
     
  12. rob lee
    Joined: Jul 30, 2006
    Posts: 1,331

    rob lee
    Member
    from omaha,ne

    Looks like ya been busy to me,badass rides!
     
  13. oldsman71
    Joined: Apr 9, 2008
    Posts: 1,037

    oldsman71
    Member

    super cool! a willys would be my #1 car I would like to have. keep
    us updated! thanks for the pics!!!
     
  14. Gunch
    Joined: Nov 9, 2008
    Posts: 78

    Gunch
    Member

    see, i know the secret to street racing, wanna hear it?
    blow it up with a 4 barrel? re build it with dual quads
    blow it up then? inject it.
    you gotta build it faster
    -how far?
    till it's an automatic, then its boring.
     
  15. bobwop
    Joined: Jan 13, 2008
    Posts: 6,135

    bobwop
    ALLIANCE MEMBER
    from Arley, AL

    you have seen that movie waaaayyy too many times!
     
  16. Gunch
    Joined: Nov 9, 2008
    Posts: 78

    Gunch
    Member

    I just watched it last night.
     
  17. bobwop
    Joined: Jan 13, 2008
    Posts: 6,135

    bobwop
    ALLIANCE MEMBER
    from Arley, AL

    Poverty Flats,***** and I watched it a week ago
     
  18. Gunch
    Joined: Nov 9, 2008
    Posts: 78

    Gunch
    Member

    Sometimes you just have to.
     
  19. povertyflats
    Joined: Jan 8, 2007
    Posts: 8,287

    povertyflats
    Member
    from Missouri

    Yeah, it was my first time to see it. I'm always 30 years behind......
     
  20. Gunch
    Joined: Nov 9, 2008
    Posts: 78

    Gunch
    Member

    There's a first time for everything...

    Any updates on the elephant?
     
  21. bobwop
    Joined: Jan 13, 2008
    Posts: 6,135

    bobwop
    ALLIANCE MEMBER
    from Arley, AL

    we are mired in that point where things are happening, but progress in not noteable, nor noticeable.

    we pulled out the package tray and braces and are moving them rearward about 6.5". We are fitting the new seats and revamping the mounting brackets.

    the steering column is in and shafts are built and mounted. All body mounts (13 in total) are fabbed up and installed, rollcage is on deck.
     
  22. Mr Haney
    Joined: Jul 17, 2008
    Posts: 1,000

    Mr Haney
    Member

    Real Nice Bob.....Really nice !

    Better forget everything concentrate on making that thing FAST ! ! You will need all the help you can get, if you decide to bring it out to the { OHIO } gasser reunion this summer ! ! ! be a few a them layin for ya !
     
    Last edited: Feb 3, 2009
  23. bobwop
    Joined: Jan 13, 2008
    Posts: 6,135

    bobwop
    ALLIANCE MEMBER
    from Arley, AL

    oh my, race an all steel car?:eek:?:confused:? heaven forbid...I thought steel cars were for shows and only glass cars were raced!!!!

    I was running the ET estimator the other night. Based on the horsepower Kilpatrick says it will make and weight we figure it will finish up at...let me just say I will be asked to leave if I stay in it to the end.
     
  24. bobwop
    Joined: Jan 13, 2008
    Posts: 6,135

    bobwop
    ALLIANCE MEMBER
    from Arley, AL

    Progress Report: The pedals are in, as is the master cylinder. The Olds rear end housing is mounted and we will have that complete in two days. The package tray was cut down ten inches to allow for the seats to be placed more rearward in the cabin, and the seats were test fit. We have fitted the nose and fenders. The aluminum radiator we ordered right out of the catalog is going to work perfectly, except the bottom hose bung will have to be altered to a 30 degree angle so the hose will clear the oil filter. We have cut the cowl vent from the hood and are making modifications for it to clear the scoop/carbs. Yes, it seems like we are creeping along, but it all takes time! We are struggling with the configuration of the roll cage. The roof on these coupes is so small, there needs to be complex angles to allow for driver comfort and safety. But we will prevail!!!! Our target is the second weekend in June and it appears that is still attainable. We have come a long ways in five months and will see things starting to come together in a hurry.
     

    Attached Files:

  25. Hot Rod Michelle
    Joined: May 3, 2007
    Posts: 1,620

    Hot Rod Michelle
    Member

    Thats going to be a nice gasser.
     
    Last edited: Feb 25, 2009
  26. -DMC-
    Joined: Dec 8, 2008
    Posts: 278

    -DMC-
    Member
    from Ohio

    Thatll make any garage look good...
     
  27. hotrodladycrusr
    Joined: Sep 20, 2002
    Posts: 20,765

    hotrodladycrusr
    Member

    or any dragstrip look good,

    I'm going to start campaigning Bob to bring it to the HAMB Drags in August.:D
     
  28. abone1930
    Joined: Jan 16, 2006
    Posts: 1,324

    abone1930
    Member

    Awesome Willys, Lookin real nice on the fab work :cool:
     
  29. mj40's
    Joined: Dec 11, 2008
    Posts: 3,303

    mj40's
    Member

    My other car is 4 work!
     

    Attached Files:

  30. hooner
    Joined: Feb 19, 2009
    Posts: 3

    hooner
    Member
    from Ohio

    Man that Willies does look like it is beggin for a Hemi. Would love to be there when you fire it up for the first time.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.