Features The Official 60-66 C-10 Chevy Truck Picture Thread

I'll post my truck soon. Non ha.m.b. friendly wheels but they were too expensive (15 years ago) to replace.

 

just bought this 60...

 

You can check more of my progress on my truck here.....

http://60-66chevytruck.com/hp_smf/index.php?topic=2.0

 

do not understand

 

I have a dropmember under my 64 and I z'd the frame on my 67 c10 (same frame) Let me know what infor your after..

 

i know not totaly hambable but one bad ass truck. Dino from AZ

 

my '62 that I'll be driving to Viva tomorrow....

Bugs

 

hey guys i got a 1963 stepside i am working on i just dropped the front a frame off and am trying to bolt a a frame from a 1980 truck it all fits . any you guys have issues mountung up the steering box and the arm the bolts up to the frame on the passenger side?

 

hey guys i got a 1963 stepside i am working on i just dropped the front a frame off and am trying to bolt a a frame from a 1980 truck it all fits . any you guys have issues mountung up the steering box and the arm the bolts up to the frame on the passenger side?

 

A few of these have turned up before, but most of the pics are old. Let's see some bitchin '60-66 Chevy & GMC trucks. My dad has owned several of these trucks since before I was born. As a matter of fact he's ALWAYS had one in the past 27 years I've been around. My little brother got one about 10yrs ago, and I finally got mine about a month ago. I guess it's just in my blood to love these trucks.

I'll start with my daily driver '64 SWB Small Window. Big plans for it, and steady working on it while driving a 40-mile commute everyday. Let's see yours...as well as your favorites...


hey guys i got a 1963 stepside i am working on i just dropped the front a frame off and am trying to bolt a a frame from a 1980 truck it all fits . any you guys have issues mounting up the steering box and the arm the bolts up to the frame on the passenger side? need some input,thanks

 

hey guys i got a 1963 stepside i am working on i just dropped the front a frame off and am trying to bolt a a frame from a 1980 truck it all fits . any you guys have issues mountung up the steering box and the arm the bolts up to the frame on the passenger side?

 

Whoa! How many times did you need to post that?

Go to the link below for lots of good info specific to these trucks

and use the search feature its your friend..

http://67-72chevytrucks.com/vboard/forumdisplay.php?f=6

 

There's a way to get started. Four posts, all repeats, and no intro.

 

wait.. why is that no HAMBable?

I know I cant post about my 70 c10

 

i just coverd my ass. since its got 20s on it did not want the hamb gods to rain down on me lol

 

Here's my pile! Got a 66 GMC too. Drive the Chevy quite often...unless it rains!

 

i got some parts for sale if anyone needs them.

http://www.jalopyjournal.com/forum/showthread.php?t=351065

 

i want drop my truck on the freakin ground and scrape like you guys. i can weld like a mutha ...where can i buy a complete air bag system to install on my 63 C10..front and back for a good price?

 

Any pictues of the tower notch for the rear axle

 

Here are a few old pictures I scanned from my stack of old pictures.





^Alinement??





Here's my real truck again since the picture went away.

 

http://suicidedoors.com/index.php

check out there raised crossmember Kit

http://www.suicidedoors.com/-63-87-...7-63-87-fullsize-chevy-raised-crossmember-kit

or you can "z" the frame if you want to save money and have good fab skills. The raised crossmember is the way to go though

 

I love these trucks had probley 15 our so

 

Just picked up a '63 short-wide, big window. 230 6 cylinder, 3 on the tree. Needs a little work but will be my daily driver in a month or so.





The plan...


and maybe some day...

 

the newest addition to my fleet, 63 factory 4X4,283!
set me back $400!! drove it home.

 

I like that one a lot! It has a neat, original look to it. It has some great options, too!

That green version ... not so much.

 

Bad ass truck Fidigter!!! I wish tin stayed like that up here!

 

Just found this in the classifieds. I would love to make this into a wicked hauler. Quad cab with a custom dually long bed fabbed up.

 

Rear is now laying sheet metal. Front's next.....

 

Damn, you lucky dog. Thats exactly what I hope to find. The only other thing on my wish list would be a factory V8 auto model. That is just such a clean old stocker.