Pay it foward = free parts for HAMB members

Fellow Hamber's
I am doing some cleaning at my shop and have some parts that i would like to give away for FREE

A few requests from me:
1. I want to give a part to someone who needs one to use and not sell.

2. Please show up on time to pick up your FREE part.

3. Sorry i am not shipping any of these FREE parts.

4. I am not going to hold the part any longer than it will take you to drive to my location and haul away your FREE part.

5. The FREE part you will recieve is located in the North end of Tacoma, Washington.

6. I am not giving all these parts to one person.

I have the following parts:

Model A/T pickup bed subrails- see picture TAKEN

1940 Ford pickup bedsides- they need work but the upper rails are very straight- see picture. TAKEN

1938 Ford pickup hood sides- pretty nice- see picture TAKEN

1934 Ford pickup cab (back section only) rough but FREE - see picture TAKEN

1950"s Chev. pickup grille with glass turn signal lenses- see picture TAKEN

Chevy 307 mostly complete- has been stored inside since removed- it was a smoker but ran. no picture - TAKEN

Chevy 283 complete, i got it at a garage sale, was stored in dry garage, turns free, condition un-known. TAKEN

PM me, or e-mail me or call me ASAP 253-221-3186 Mark

 

I am in on this I have a COMPLETE 283 with an engine stand i have been trying to sell for some time now. I live in Oxnard right along the way to santa maria and i will be back home Sunday morning anybody who wants it can have it FREE!!!! PM Me and i will send you my number and we can meet up and f=igure it out. Moter needs rebuild smoked good when I TOOK IT OUT OF MY RUNNING TRUCK!!!

 

lol everythings on the west side

 

Looks like you need to take a trip with a truck

 

bttt

 

Anybody who wants a 289-302-351W or 351C 2bbl Ford core engine for rebuilding. I got one and you can have it. Here in San Mateo. Good freeway access.

 

I sent some parts to oldfart here on the HAMB and I am still waiting for him to post something on this thread. apparently he does not understand how this pay it forward works!!!!!!

 

I PM him and he said he does world of wonders to all the HAMB members. He said he would post something soon. it has been two months and no reply from him yet. . .(in regards to posting something on the thread) there is always people like this that can ruin it for the rest. . .

 

I keep watching this thread to find something I need for my 39 ford deluxe coupe, but I do have something to throw out when the time comes.

 

If somebody really wants to pay shipping, and if it's okay with Kevin, I'd be glad to facilitate (pick it up, wrap it, and drop it off at the shipper)...

~Jason

 

top

 

Engine still available

 

looking for 51 merc parts

 

I have a pair of 55/56 Ford Headlight bezels in the classifieds, last time I posted them as make an offer, they were taken down for not having a price. If someone needs em, let me know! Also have some gidgets an gadgets for 53/54 Chevy, will have stock uprights and steering arms soon, as I am putting on some dropped ones.

 

Leadsled RnR, I'll take the bezels. I'd like to try them on my truck to see how they fit.

I've got a vaccum advance SBF dizzy that I got from a HAMBer and I never did anything with it (not a Ford guy but almost did it once).

 

Its not always about getting something back.Just post what you have to give, and if you feel like post what you need.

 

Ive got 51 caddy shortblock and tranny attached. The engine turns over but will have to be rebuilt and tranny would shift manually but when you came to a stop it would get stuck between gears. I just pulled it out of my 53 . PICK UP ONLY tyhat thing weights a ton . If you have a pickup or trailer i can put it in it.

 

Any tri 5 guys need some stuff? I have a radiator out of a 55 v8 car, and a bunch of 55 and 57 4 door parts from cars I've stripped over the years. No holy grail wonderbar or F.I., just a bunch of stuff that's too good to scrap like a rear and seat core. 55 inner front fenders& bumper brackets. Pick up only in Gettysburg PA 17325

 

I am in need of small parts for a 3X2 set up with Holley 94s, i.e. linkage, lines, fittings, etc.

I have a bunch of interior door panels trim pieces for a 61-66 ford F-100 to offer up

 

got some stuff here...
always lookin for 51 chevy parts and lookin to build a 29ish roadster anything helps.

 

Wish you were closer,I got a club member building a '55 210 gasser and we're both in So. Cal,so any '55 parts would help.I got some sheet metal,16 ga. stick sheet,4'x4' and a sheet of stainless 3'x4',bot are 16 gauge,pickup only.Looking for '63 Cadillac stuff,or '55 Chevy stuff,or '53 Plymouth Cranbrook stuff,only '63 stuff is for me.Pretty sure I have more stuff I can put up later.
I'm in Yucaipa,CA

 

had thunderstorm come thru earlier so I couldnt post any pic. Heres a good starting point for a traditional rod.

 

sickboyslick13<SCRIPT type=text/javascript> vbmenu_register("postmenu_4004636", true); </SCRIPT>
i will take the steering wheel if you still have it.thansk

 

have have some 57 chevy wagon parts door hinges , view mirror , inside back window trim for quarters and a few other things just pay shipping or pick up.thanks
i am always like f or parts for my 1946 chevy pick-up.thanks

 

...i still have the wheel covers.

 

Bump

 

looking for 32-36 wishbone ends

 

i've got two super clean 54 chevy skirts and alot of tranny and drivetrain parts same car

 

Really like to have the skirts! If you still have them please let me know. Jim