Pay it foward = free parts for HAMB members

Well it looks like the intake is taken.

 

I have a couple of SBC oil pans I'm not using. One early >283 (A few dents) one late model> 350 etc, (Really nice). I also have a shorten 283 SBC road draft tube I don't need. If anyone wants these (you pay shippin via Paypal) they're yours. Please PM me as I'm may not see your reply in this thread.
Or if you want to trade, let me know. I need a nice 28-31 Model A grill shell.

 

The intake is gone went out in the mail today still have the carter bbc mechanical fuel pump.

 

Anyone have 30-31 ford coupe door & windows garnish mouldings?

 

i realy need a 1936-39 ford wide five front drum, i have one one already. its all thats keeping my car from rolling. i have a brand new set of 2' zink plated shackles for ford, and a set of new rear shock mounts both from speedway up for whoever needs them.

 

anybody got a electric fuel pump???

 

6 or 12 volt ?? Got an old 12 volt Autopluse

 

I am interested

 

Time and space are two things I'm short of in my life. So I sold off my '84 Fiero and my 350 EFI Chevy to narrow focus to a "dream-engine" hi-deck 330/341 DeSoto project. I really like the pay-forward idea, but I can't imagine HAMBERs out there with spare DeS parts to swap, and I don't have time and space to store non-DeS items 'til someone takes them away, even free. Having noted my quandry, I collected lots of odds & ends back in the '60s through early '80s when rarer cars started getting scarce in the boneyards. I'm not a big eBay fan, but I wouldn't mind seeing someone who NEEDS something take it away FREE, plus shipping. So if this fits the "pay forward" spirit, let me offer an '84/'85 Fiero perfect L-F fender (red) to a Fiero fan and see if I can do my "pay forward" part! I'll have to find a box for safe shipping, so bear with me. Have a crunched fender? Please send me a message VIA the HAMB network. I'll check as often as I can. (Of course, I'll have to find out S&H cost once a taker speaks up.) If this works, I'll dig for more parts, gang!!! -- Jimi'sHemi291, FNG

 

the shackles and shock mounts are gone, but still looking for a front wide-five drum.

 

Chevy truck axle spoken for.

 

anybody got a bit of orange paint left over from a project? A junior hotrodder in my house is in need of enough to cover his go-kart.. I didn't want to just rattle can it. I'll come up with some stuff to offer.

 

Looking fo 15 inch 5 on 51/2 ford truck wheels, any help or leads would greatly be appreciated and ill be rading my garage so keep a eye out...

 

I haven't requested any of the parts up for grabs, and I hope I'mnot screwing up the flow here, but I have some parts that some of you HAMBERS may need. I have a 40 Chevy axlew/ spindles, shocks, some other various suspension stuff that is in good shape. I have some interior inner steel panels too that I am not re-using. I may have the column up for grabs too....I'll let you guys know in a week or two about that.
I would like to find a 9 inch if anyone has one laying around.

-Danny

 

What renegades! The HAMB is so unlike anything I've seen in my life. Here are a bunch of competitive guys who love their wives, girlfriends, families -- and involve them in the meets -- BUT thanks to a brilliant HAMB member with a 392 fuel pump to give away, NOW we're giving spare AND RARE parts away to one another for the cost of postage. Ya get to say what you may need yourself (seems fair). But the important thing is that if you never get something in return, you still know your part that was gathering dust and taking up space IS gonna ply the asphalt again, and soon! Point is: You pass on something you don't need, and hopefully somebody playing the "Pay Forward" scenario will offer up just what you need. Beats the shit out of Eba--- ... What a pleasure to be even an FNG of the HAMB.

 

Got the headlight rings. Still have the Ford SB Dizzy. Vac advance.

 

Hello Danimal, If those head light rings don't work out for you and you want to pass them along could you give me a pm please. thanks.

I still have all the 6v stuff from my '55 Ford up for any one doing a restore all worked fine when I took it off.

 

Did you ever find a set?

 

I just requested a few parts from someone but I was going to list these regardless:

(3) Rusty Interior panels from a 63 Ranchero and (3) pieces of bed trim from same
(1) headlight bezel from a 74 Dart (NICE-forget which side-not traditional but WTF)
(1) quadrajet for parts or rebuild from a mid 70's Caddy BB ***taken***
(1) Model T wood spoke wheel - I'll measure ***taken-non hamber***
(1) beauty ring from a 41 Chevy- daily driver condition
(1) 1988 Honda CRX rolling body- on craigslist in a day or 2 (again free so don't hate me) ***gone to craigs***

You can arrange for pickup-I'm in Dallas

 

17 inch early Ford spoked wheel&tire. good for a rolling project.
33-34 ford radiator,single inlet and outlet( not for flathead)
Still have the tri 5 Chevy stuff
Also a 56 chevy power pack intake & dizzy
34 plymouth spare tire carrier, some bondo but not hateful.
Someone come get this stuff in Gettysburg PA!

 

Since you asked so nicely and they'll fit on your car, send me your addy and I'll pass them along. Looks to be a bit too much modification for what I was thinking about but at least now I know!

I'll PM you as well.

 

Chris the chop saw is on the way. lmk. jim.

 

Looking fo 15 inch 5 on 51/2 ford truck wheels, any help or leads would greatly be appreciated and ill be rading my garage so keep a eye out...
<!-- / message --><!-- sig -->__________________
.:GAMBLERS:.

Got some from a late 80's 4x4 ford I think, they are solid aluminum with the cirlce holes around the perimeter. Somebody is using two as stand ins on their roller, I will get back to you.
<!-- / sig -->

 

I desperatly need front fenders for a 52 chevy deluxe. I have lots of badging and guage clusters for 55-59 chevy pickups. If you have a bad gauge in your cluster I will disasemble one of my clusters and send it to you. Really N E thing for a 52 chevy would be good.

 

I need a set (two) holley 4 barel doublepumper carbs in the 700cfm range for a blower setup. I do not mind rebuilding them... please help! I will tade the donor of these a working polished mini aluminum 3HP SBC starter.

I have an NOS brand electric fuel pump (rubber insulated) with Mounting bracket. Moves a ton of fuel really quick for racing applications.
10.00 shipped
I have a set of shorty covered front shocks for a dropped axle (new and painted version)
10.00 shipped

PM me if interested.

 

Thanks to r8odecay for the model A dash panel.

 

I want to get this fuel pump for Double Caddy if he has not found one yet...he really needs it. I'll PM you.

Edit: YEah, Double Caddy still needs it, I want to claim it and pay for it for him...lemme know your paypal or how you want the tenner.

No problem Norton, glad you could use it.

 

I need one front fender spear(chrome trim on the side)for my 1961 Impala.

 

I need the return of the driver front fender and the passenger rear fender, and my 39 deluxe hood back from whom ever stole them. If anyone has any throw aways that can be reworked for my '39 ford deluxe coupe, I have other stuff to throw to the crowd

 

Sent both R8odecay and Doublecaddy PM's. Fuel Pump Spoken for.