is it time for a frame pic thread?

Here's our's. 2x3 Box tube built at home.

 

This is the chassis for our HA/GR car.

It is for sale.

 

My '32 Roadster build..........Z.

 

That is so pretty.

 

I just dragged this one home! Pretty crafty, huh? Who needs those clumsy boxing plates. A couple tack welds and I'll be good to go.

 

A $15.00 dollar 38 ford frame that we modified and pinched to fit under the yorkster project.

 

Cool thread Idea. Here is the frame for my Model A built by Riley auto. It is now sitting on it's front suspension, but I dont have any pics of that yet. Hopefully I will very soon have this as a roller.

 

Great stuff on here so far guys, exept for my last entry. Thought I would booger-up an otherwise awesome subject. Hope you all get a giggle.

 

Mike47 thats a sweet frame you picked up.

 

Heres my 55 frame

 

bad ass !

 

Yeah! HAHA. it'll be ok. Needs a bit of tlc and those motor mounts need the attention of a sawzall. Maybe I'll do a frame repair tech thread soon.

 

Pics of my '41 Ford PU in progress.

 

Got a bunch of pic's of different frames we have done.
It's fun doing different styles (sometimes)
I know how to do the thumbnail pics ....

 

VAPHEAD... I am always impressed with the quality of your work...John

 

schmore..

 

what was this frame used for & have you got any other shots of it

 

nutter,that's a modified version of our double Z model A frame.
We sized it to fit a '27 T coupe.
and it had bags in the rear and a suicide front.

PM me your email,and I can forward you some more pictures.
eriC

 

thanks Im looking at all the designs looking at waht will work & what wont work for me this is clean got a small kick up in the front, tapered rail, suicide front, keeps wide around the body, as I need best so far fo me could you run a few holes down the front section ??

 

hey angry, any info on that x-member setup? it looks great.

 

Here is my 34' sedan frame waiting for the body to get done.

 

Sleeved holes in the front frame rails?
Sure,we can do that.It just takes more labor ($)

 

TCI Stage 3 powdercoated frame for a 32

 

Trying to finish mine. I have a thread about it somewhere on here.

 

Some shots of my frame that Carl Fjasted , at Deuce Frame Company did for me.

 

Is the cross-member tubing joining the framerail at different heights left and right? If so would that be to deal with torsional twist from the motor/driveline?

Dig your frame stands BTW

Barry

 

crossmember level.
Don't have any pictures of the frame with the drivshaft loop
tying the crossmember together in the rear.

Barry,the frame stands were good.

 

Frame i built for my 41 Nash. Its part 41 Chevy, part 67 Camaro

 

'hol lotta framin goin on, Mine is the one down in front