Pay it foward = free parts for HAMB members

Got the carbs from "6inarow" yesterday! plus a T-shirt, Thanks!

 

I got a 35 ford rear end needs a new torq tube but if someone wants to get it in Des Moines your more than welcome to it.

 

looking for the following
56 chevy parts
passinger side hood extension.= chrome trim over the blinker
56 front style motor mounts .
fender well headers for a small block chevy
looking for 2-holley carb bases..they look to be anywhere between 500;s and 750 how do i tell what they are
let me know thanks

i have a 80s something rear end out of a chevy pick up its a 10 bolt complete drum to drum..come get it..

 

got the headers from from CadDaddy,and the carb adapters from RevColin.. still have some Y-Block stuff to offer up if anyone needs it.. i am in need of a front spring Cross-member..

 

FREE STUFF: Come up with a few bucks to cover shipping and it's yours...

2 Rear Quarter Trim Panels for '61 Galaxie 2dr. (Ribbed panels between wheel well & rear bumper)

'32 Ford Crossmember (aftermarket), installed, then uninstalled before car hit the road. about 22" overall width.

Y-Block 292 2bbl Intake Manifold. Good shape, from daily driver.


STUFF I NEED: (I'm willing to pay)
Ford FE Go-Fast Parts , Slot Mag Wheels, Crusty Old Cheater Slicks for Mock Up, Toploader 4-spd shifter, Ladder Bars, Early Drag Parts, what you got?

PM ME.

 

I would like to have the cross member.
Is it easy to ship.

What FE parts are you looking for.

Richard

 

In need of 4 Ford wide five wheels. I have some stuff I will post up in a bit. Today is garage cleaning day.I have a
quadrajet carb
several hubcaps
Model a cowl band
I will post more in a bit

 

PU FENDERS - I have a pair of rough rear fenders for a pickup, I think they are '36 Chevy PU stuff. I can send photos. Like I say 'ruff', but FREE. I really don't want to ship them as they should be crated ( a big hassle and big $$$).

Steve - SE Michigan

I'm looking for door window regulators for a 1940 Packard...

 

NEEDED: SHORT Tailshaft section for a turbo 350
2: Small CFM 4 BArrel (Rochester,or Holley will work)
3: Model A Window Crank Handle
4: Model A inside Door Handle
HAVE 1: 4 15x8 Chevrolet Truck Ralleys 5 lug (you need to pick these up to heavy to ship)
2: 2 14" Large ford bolt pattern Steel wheels (rusty but still holding air)
3: 1 48 or 49 Ford F-1 Front Axle and springs (spindles/brakes and shock mounts removed) must pick up to heavy to ship
Cleaning garage this weekend will post more stay tuned

 

Adding
4 Rambler hubcaps 2 sets of two unmatched
Voyager trailer brake controller, new in box
Msd Boost ting master
2 4 lug comet falcon 4 lug drums fronts I think
Comet falcon rear axles
4 14 inch mercury hubcaps


Need 4 wide five ford 16 inch wheels
fender extensions for 64 Comet

 

TexasHardcore, PM'ed ya re: FE parts yer looking for

 

I just wanted to give a shout out to Hackerbilt (Bill). In another thread he was looking at an old Ford truck frame, he grabbed the front spring brackets off it and shipped them postage paid across the border to me so that I can run the stock springs on my '46. The generosity of people like Bill is what makes the HAMB so great.

I am going to offer up what I believe is a NOS '42-'48 Ford glass tail light lens. KD Triflex #283. I had a pair of these in my garage for more than 20 years and because the glass and the floor don't make good, I now only have the one. Maybe one of you guys could use this one before I break it as well.

Thanks again to Hackerbilt for the spring brackets.

 

got a pair of SBC header flanges, and a 19??-1925 T roadster rear or can cut for patch panels free to whoever needs them, and a 1938 ford truck steering wheel, you pay shipping. need a trans out put yoke, if thats what they are called? for a 1965 buick switch pitch or one that would work for that tranny. Also 1935 ford spindles.

 

the "Pay it Forward" thing is cool

but there sure seems to be a lot of plain and simple wanted
or want to trade ads here
shouldn't those should be in the classifides

 

i havent seen anything i want yet, but really love the idea. i have a 51 flathead intake, holley 94 carb-needs rebuilding, and a rusty early 50's frame w/ motor, tranny, axles, pretty much a full roller. frame is probably no good, but rest should be salvageable. it is all just south of atlanta. pick up the whole thing, or come down and take what you want. some more parts ill have to look when i get home
also have shorty headers for 97-03 f150, left is good, right is cracked and needs a little work

i need door and rumble latches for a 29 A, and any other various parts for an A or 51 flathead

 

<HR style="COLOR: #e5e5e5; BACKGROUND-COLOR: #e5e5e5" SIZE=1> <!-- / icon and title --><!-- message -->
Adding
4 Rambler hubcaps 2 sets of two unmatched
Voyager trailer brake controller, new in box Taken! This thing had the 99 dollar price tag on it
Msd Boost timing master
2 4 lug comet falcon 4 lug drums fronts I think
Comet falcon rear axles
4 14 inch mercury hubcaps


Need 4 wide five ford 16 inch wheels
fender extensions for 64 Comet

 

Pm sent

 

what else we got fella's? im waiting on shipping payment from skwurl for his holley 94

 

What do you need?

 

just really trying to get the thread back up and going. most of the remaining parts i need will need to be new, but most are miscellaneous model a parts or flathead parts.

 

IRS30 I have an older holley problaly a 600 cfm the markings on the side are 8187A if you are interested let me know it will need to be rebuilt all the linkages move freely

 

OK, I've cut the front off my 51 Pontiac frame, it still rolls everything BUT the steering box is there, they are rear steer cars. This is ONLY the front frame section If you need it come get it

 

I have an A cowl band.

 

i have a good cowl band, primarily looking for anything brake, hub, or spindle related, some miscellaneous gauges, or some radiator support rods

 

steering wheel, header flanges, and T rear are all gone

 

Carb was sent

 

I have a 53 chevy belair dogdish hubcap. Decent shape for a driver.

 

bent or un bent?????????

 

heres one,, for 1955 Buick front suspension parts NOS may fit other years I don't know.. cars long gone and just can't throw it away ********** ,,,parts have found a home********