I hope you're better than this guy....

Ok, come clean now.... that's YOU in the video isn't it???

 

I had to turn it off half way thru.

 

It's not working for me.

 

FUNNY FUNNY FUNNY first time ive smiled all week THANKS HAMBERS

 

whas up homee!!....

 

It sure looked wrong to me!If you have a hole I think you have to carefully form a patch panel and stitch weld it to avoid warping the steel.Then you finish the weld,grind it smooth and then put on a thin skim coat if necessary.If I am wrong please correct me!

 

man who ever did my chevy must have seen that and lived by it cuz almost every panel had shit like that done to it

 

You are wrong. A piece of screen and dental floss, then mud it up. That's the only way.

 

I'm in trouble, I think I bought a car from this guy.

 

My dog leaves better work in tightly coiled piles on the lawn, to borrow a phrase from Family Guy.

 

That's funny.

The best part is the dental floss.

 

My Chevy was the same way. It had a new surprise on each quarter panel and fender. They were all fixed like crap a different way!

 

Ok, come on, fess up!!

Who are you and can you redeem yourself with an actual Tech Thread about sheetmetal replacement?!

If you do, I will tip my hat to you.

 

i dont take advice from someone who has a speech problem...sounds like he has a mouth full of shit to me

 

Ok I'll fess up, IT'S ME. Would you like to buy one of my vidios.
I'll throw in some free Dental floss with the first six orders.

 

You're absolutely right. Although, {here it goes} if you are working on a Rat Rod it would be suitable.

 

+1 Is he from Jamestown Tennesse? Somebody needs to stop him before he works on something cool...

 

after watching the vids i am going to sell my welder and buy some screen...lol..

 

I was factory rep. for paint co. for 30 years and run two states. Sad to say I think most of the used car guys learned from his tapes. Like one of the guys said I have saw far worse than he did only they were smart enough to only use night auctons.
Wouldn't even try to run one in day light.
Don

 

Reminds me of a guy I saw who was doing some bodywork on a mid-80s Chevy pickup. The rear wheel wells were rusted out so he used an empty bleach bottle on each side glassed it to the inside and bondo'd over the outside because the shape matched up perfectly.

Those videos were like an accident on the highway that you know you should pass, but instead you look on like everyone else and bring traffic to a crawl...

 

expanding insulating foam..... the new window screen and floss.

how many of you have come across that stuff? Be careful grinder sparks set it ablaze.

 

Getting ready to support the new Muslim holiday Carbombadon. The hot rod jihad starts NOW !!!! BONDO AKBAH!









Rome

 

No-one's mentioned using stale bread! It's great gap-filler, sands well, and bog sticks to it like shit to a blanket! And if your real hungry you can reach up inside your fender, break some off and dip it in your soup! That guy must do the pre-export work on some of the cars that end up down here!(especially Mustangs)

 

I'm impressed that he kept a straight face throughout all 3 videos- especially when taping his protective headgear on!

 

I saw the Bondo and pop rivets and remembered all of my buddy's and mine cars from high school

 

His high school yearbook photo?

 

For two days now I have had my T shirt pulled out of my pants and covering my pockets, Wow it really works! My pockets haven't filled up with sand, rock, bondo dust, even doggie doodoo, sure beats my old way of cutting the bottoms out of my pockets. Thanks Al your my autobody Pal!

 

In response to the dozen or so posts that insult the personality, physical appearance of the man in the videos. Is this a contest to how rude one can be to another human being? To disagree with a particular repair technique is what we all do when we prefer a different technique. Wouldn't it be more appropriate to cite the physical properties that make our preferred repair superior, compared to what we consider the inferior methods(if you know)and the differences thereof?

To lower one's self to insult the facial structure/haircut/mannerisms of the instructor in a commercial video is akin to a group of juvinile apes jacking-off to display their virility. Go home boys, your momies' calling. Come back when you have developed social graces that are above that of ten year olds that experiment their social graces by parrotting the bully.

 

DING DING DING!! We have a winner....If this isn't proof, I don't know what is.

 

Only a hit dog howls, careful there Al, it's along fall off your high horse.