holley 94 help for a fng

Im about to rebuild two holley 94's for my 49 flathead. I will be running a fenton intake with the two pre mentioned holleys and a direct linkage. I have read on here you either need to put smaller throttle valves in both and or a block off throttle valve in the secondary. My question is which one should I go with? If its the smaller, which size? Any help would be greatly appreciated.

 

Which 94's do you have??

 

ecg's

 

PM dickster27,he's a 94 god!!

 

Your talking about the spark control valve @ the end of the carb
Just put in block offs instead of "power valves"
I just did that in mine that I got from Dick...

 

Power valves are completely different and located between the base and main body.

 

Read this thread

http://www.jalopyjournal.com/forum/showthread.php?p=2857444#post2857444

It tells you everything you need to know to get your 94 working. I have two 94s on my 48 flat head and used 3.5 power valves. The stock 7.5 cause flooding. The next time I work on them I might go to 4.5.

Good luck

Rich

 

I know that..They look like power valves, Notice the Quotation marks....

 

Sorry, didn't want anybody getting confused.

 

Trying to make it ez for him...I've been working on a set of 94's for the last 2 weeks trying to get them to run right

 

thanks for the link