History 1963 Dart gasser pics needed?

If anyone can help with ideas and especially photos of AWB or gasser Darts would be apreciated. Thanks Skip

 

Anyone?

 

theres one on the awb thread page12,,,, http://www.jalopyjournal.com/forum/showthread.php?t=393460&highlight=awb&page=12 ....

 

http://www.moparmax.com/tech/ii_1-dart-1.html

 

a couple

 

hot dammm you guys rule.

 

They make Awesome A/FX cars!

 

Heres a bad mamma jamma - Jaxx

 

my vote is for a altered wheelbase,but please don't use a A100 beam under it.The narrowed truck axle is being way over done.

 

Here's a couple from another thread:

 

That Schmaltz car is bitchin.

 

Anymore?

 

Thanks Max

 

No problem.. So what's the scoop? You gonna build one? Do tell...lol

 

Misc old magazine shots

 

I have a chance to buy a powder blue 63 hardtop fairly cheap....I also have a speedway straight axle kit and a narrowed 9 inch....I also have a rollbar kit....4" dish mags and 8.5" dish mags....engine I do not have....a 383 with a 4 speed would be tits.

 

There you go... a 383 would be plenty for that little A Body..I had a Mild 383 in a 67 Dart with a 3.91 Sure Grip,727, it ran 12.90's all day long with an out of the box Edelbrock 750 Carb!

 

If you do end up getting the Dart, you should give some serious thought to joining www.forabodiesonly.com. They'll have all kinds of early A-body and big block swap info. Shoving a 383 in a '63 would take a little work as far as motor mounts, headers, and stuff like that goes. But, it's been done before many times and there are even a few kits to do it.

 

www.moparts.com is also real good... as is www.forbbodiesonly.com

 

elephant ears and fenderwells..... those pics of that rampage are crazy....whats the wheelbase 90" or so..?

 

Nope, no elephant ears or fenderwells required. Schumacher makes motor mounts and headers for the swap. tti also makes swap headers but they are a little pricier. Could almost make it look like a factory job......

 

The Dart has landed.

 

It is the fully loaded model.

 

Looks solid. Original hubcaps even. You California guys get all the good cars. Good luck on it.

 

Can some one photoshop front only AWB with a straight axle.....dish mags.....no radius wheelwell.