Register now to get rid of these ads!

40 Ford Chop

Discussion in 'The Hokey Ass Message Board' started by Jalopy13, Feb 7, 2010.

  1. Check out post #29 on Ryans post this morning "Take that Mrs Lauren"..you might like a good chop on a 39-40 cpe after seeing Doug Rices coupe....
     
  2. skirtless33
    Joined: Feb 10, 2007
    Posts: 194

    skirtless33
    Member

    my,old chopped 40 but I don't know how much. Found it last year.
     

    Attached Files:

  3. 32SEDAN
    Joined: Jul 30, 2008
    Posts: 1,314

    32SEDAN
    Member

    Please no... Cut up something else!
     
  4. hombres ruin
    Joined: Nov 21, 2006
    Posts: 3,314

    hombres ruin
    Member

    No way would i chop the forty its beautiful as yet,a classic ride with custom lines right out of the factory...as for EL Matador thats a horrible custom,its what not to do to a 40.
     
  5. Royalshifter
    Joined: May 29, 2005
    Posts: 15,661

    Royalshifter
    Moderator
    from California

    I have to agree....Vern Hammond has one of the nicest chopped 40's around...I hope mine comes out this nice.

     
  6. zibo
    Joined: Mar 17, 2002
    Posts: 2,361

    zibo
    Member
    from dago ca

    His is nice but there's so much bondo on those rear quarter panels to make it so.
    That's the hard part about chopping is getting those to line up without making a mess.
    TP
     
  7. farmer12
    Joined: Aug 28, 2006
    Posts: 7,717

    farmer12
    Member

    Never seen a nicely chopped 40, Vern Hammond's ride comes close. The car looks better unchopped. Good luck deciding.
     
  8. pinky49
    Joined: Jan 3, 2009
    Posts: 119

    pinky49
    Member

    the tom hocker 40 on rickster's site is damn nice!
    ed
     
  9. 40streetrod
    Joined: Nov 11, 2007
    Posts: 477

    40streetrod
    Member
    from nj

    cut it up, it's yours and if you don't like it when it's done get in line at Bob Drakes. His new 40 Ford Coupe body is coming out in the fall. check it out on his web site.
     
  10. Aman
    Joined: Dec 28, 2005
    Posts: 2,522

    Aman
    Member
    from Texas

    You have big cajones wanting to chop a 40 Ford coupe. What's wrong with the way Henry designed it? ;) Just kidding...looks like one of the hardest cars to chop and get everything correct with all the curvatures. Certainly not like a nice straight Model A that's for sure. However, if you decide to do it you must promise to do a "How to" thread complete with pics and instructions.;) I think a lot of us would be all over that. Whichever way you go, it's a 40 Ford and they don't make 'em anymore so be care and good luck with it!
     
  11. fab32
    Joined: May 14, 2002
    Posts: 13,985

    fab32
    Member Emeritus

    Another no vote on the chop. I don't mean no I mean HELL NO!!!! There have been more '39-'40 coupes ruined by abortion top chops that Bob Drake wouldn't of had to go to the trouble to make a steel repo if they hadn't been done.
    Slam the chassis if you must but keep the sawzall away from that beautiful sheet metal....................PLEASE!!!

    Frank
     
  12. Rikster
    Joined: Dec 10, 2004
    Posts: 5,795

    Rikster
    Member

    PLEASE.... chop!

    1940 Ford Coupes can look very good with a Chopped top. Especially as a wonderful full custom. I'm not sure if the chopped top treatment will work so well on a Hot Rodded 1940 Ford. But if you want a nice taildragging custom... you have to cut that top.

    Its only metal, and there are plenty of un-chopped 1940 coupes out there for everybody on here that hates them... so don't let them spoil it for you.

    Donn Lowe is working on this masterpiece.... Who said 1940 Ford dont looked good chopped?

    [​IMG]


    Verne Hammond...

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]


    Some older samples

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    Last edited: Feb 11, 2010
    EVL401 likes this.
  13. 1/2done
    Joined: Oct 29, 2006
    Posts: 639

    1/2done
    Member
    from Ohio

    If you want a chopped 40, I say go for it. I've had this as my desktop since I got my 40.
    [​IMG]

    I hadn't seen any other shots until Zibo posted some he took. Lose the moon tank and the bumpers and it's exactly what I want.
    [​IMG]

    It's not like I'm cutting up a perfect car.
    [​IMG]
     
    EVL401 likes this.
  14. Damn, I want one for my next build. You have to stay conservative when deciding on how much to whack it.
    El Matador in '93 (compliments of Kustomrama)
    [​IMG]
     
  15. CrazyDaddy
    Joined: Mar 30, 2002
    Posts: 670

    CrazyDaddy
    Member
    from Austin TX

    They look best with the drip rails intact. Look at Vern's and zibo's - compare those against the others posted by Rikster, and you'll see what I mean.
     
  16. Don Lowe's cutting one? Looks great but I know Don could cut a stagecoach and make it look...perfect.
    He's my hero...love visiting his shop when I go home to visit friends/relatives in Oregon.
    I love what he and "House" can do with a 36 ford 3 window chop...so damn perfect!
     
  17. Baron
    Joined: Aug 13, 2004
    Posts: 3,658

    Baron
    Member

    Just happened on this old thread. Here are a couple pictures of a 40 Coupe I chopped a few years back. 2 1/2 inch consertive cut almost goes un-noticed. If anybody would like to see how/where this was cut,measurements,etc,I have all that info.
    [​IMG]
    [​IMG]
     
  18. jackfed
    Joined: Feb 10, 2011
    Posts: 1

    jackfed
    Member

    Hi my name is Jack federico, I have a beautiful 1940 ford resto mod and I'm thinking about chopping it. I would appreciate any pointers etc,, here's a pic of the car,, I've also "morphed" it to see what it might look like chopped, I have many more photos I could send you. My e-mail address is jackfed@yahoo.com. Thanks.
     

    Attached Files:

  19. 00 MACK
    Joined: May 10, 2004
    Posts: 3,680

    00 MACK
    Member

    There have been boat loads of good ones!
     
    Last edited: Feb 10, 2011
  20. jville_hot_skater
    Joined: Apr 9, 2009
    Posts: 1,002

    jville_hot_skater
    Member
    from jville

    if its a coupe, DO NOT CHOP IT!!!
     
  21. Rikster
    Joined: Dec 10, 2004
    Posts: 5,795

    Rikster
    Member

    Sure you can!!!
     
  22. weez
    Joined: Dec 5, 2002
    Posts: 860

    weez
    Member

    I agree with Rik...

    Custom: chop it. (but PLEASE do it right!!!)

    Hot rod: don't chop it.

    Verne's is the best I've seen. I think some have the 1/4 windows too short, I love the Doug Rice car, but I've always thought those windows were too short.

    Yes, there's a lot of fugly '40 chops... but you can fuck up anything-
     
  23. 00 MACK
    Joined: May 10, 2004
    Posts: 3,680

    00 MACK
    Member

    Jim Walkers was one of the best other than Vern's. Short 1/4 windows do blow.
     
  24. I keep the sawzall idleing just for moments like this! CHOP IT
     
  25. Rikster
    Joined: Dec 10, 2004
    Posts: 5,795

    Rikster
    Member

    [​IMG]



    Donn Lowe

    [​IMG]

    [​IMG]
     
    EVL401 likes this.
  26. falcongeorge
    Joined: Aug 26, 2010
    Posts: 18,339

    falcongeorge
    Member
    from BC

    I agree. Never seen a chopped, unsectioned '40 that wouldnt have looked better if it had been left alone. The only way to carry it off is if you also section it.JMHO.
     
  27. falcongeorge
    Joined: Aug 26, 2010
    Posts: 18,339

    falcongeorge
    Member
    from BC


    Ok, JMO, but this is actually a great example of why not to chop a '40.
     
  28. yblock292
    Joined: Oct 10, 2006
    Posts: 2,937

    yblock292
    Member

    NO...............not a coupe, two door sedan cut right OK.
     
  29. Labold
    Joined: Nov 1, 2007
    Posts: 1,219

    Labold
    Member

    That Donn Lowe car has a nice flow to it.
     
  30. 00 MACK
    Joined: May 10, 2004
    Posts: 3,680

    00 MACK
    Member

    I hate visably leaned back A pillars and faux rain gutter on customs. If a chooped 40 coupe has a rain gutter at all, stock configuration sweeping back to the trunk over a nice long 1/4 window is the ticket.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.