Register now to get rid of these ads!

Features 32 3-W Survivor "Tuffy" part 2

Discussion in 'Traditional Hot Rods' started by kisam, Nov 24, 2009.

  1. Paul
    Joined: Aug 29, 2002
    Posts: 16,833

    Paul
    Editor

    I love it, you are amazing!
     
  2. missysdad1
    Joined: Dec 9, 2008
    Posts: 3,307

    missysdad1
    Member


    Keep in mind that Kathy isn't creating this car, she is re-creating it.

    Her decision (see the early part of this thread) was to retain the old-time characteristics of the original car wherever possible, instead of changing the nature of the car by applying modern technology and building techniques.

    She has fudged here and there in deference to safety and torsional rigidity to protect the body and the passengers, but this is a good thing, in my opinion.

    You may not agree with her decision, but her resolve to retain the "historically-correct-but-flawed-by-today's-standards" flavor of the original build is unshakable. I am in complete support of her approach.

    Go Kathy!
     
  3. seatex
    Joined: Oct 24, 2006
    Posts: 2,671

    seatex
    Member

    WOW, you are doing a fantastic job, Kathy! Cant wait to see you doing burnouts in the parking lot of the "Good" Hotel in Temple. You are going to make 'ol Colin proud!
     
  4. kisam
    Joined: Feb 28, 2005
    Posts: 1,922

    kisam
    Member

    Gary, I'll buy you a band-aid to go with your coloring box - did you pick a color yet? ;) Seriously, it's been said before that in today's world such an extreme channel would be bashed, but I am staying with my first instinct which was to take it back to what it was. You cannot deny that the original stance demands your attention! Does this picture make you feel any better?

    [​IMG]
    [​IMG]
     
    kidcampbell71 likes this.
  5. kisam
    Joined: Feb 28, 2005
    Posts: 1,922

    kisam
    Member

    JB, I so wanted Tuffy to be at the "good hotel" for his first outing. Day Of The Drags is my favorite event of the year. Casey is alway on my mind - parking lot donuts:).
     
  6. Here ya go;
    [​IMG]
     
    kidcampbell71 likes this.
  7. Thanks Kathy, when I first saw the chaneling on the car it made me wonder what you were doing, I had never taken the time to view the entire build, so, I was unaware that it was a survivor car and you were recreating what had been done back in the day. You have done a tremendous job, my hat is off to you and your friends, wish I lived closer, I'd like to see that up close and personal like. I'll be paying closer attention to this thread.
     
  8. Kathy, first off, I should have paid closer attention to this thread, I had not followed it in detail, just picked up on the end, I didn't realize you were recreating the original build. I think I suffer from the same thing you do some times, I look at pictures and don't read everything like I should. I saw so many killer parts and guess I was a little overwhelmed :eek:. The chaneling part really sent me way out there lol. I think you have done a remarkable job, a tremendous undertaking I'm sure. I'll be watching this thread a lot closer from now on.
    Way Cool
     
  9. JeffreyJames
    Joined: Jun 13, 2007
    Posts: 16,627

    JeffreyJames
    Member
    from SUGAR CITY

    I guess you didn't read the post above yours either. He had a similar response haha!!!!!
     
  10. Yes I know. I'm an Idiot.
    It said Survivor right there in the title.
     
  11. kisam
    Joined: Feb 28, 2005
    Posts: 1,922

    kisam
    Member

    No your not, and your one of my favorites! Welcome to the dark side!:)
     
  12. I am probably coming out to Friendswood next weekend, I'll stop by if you aren't working.
     
  13. RoadsterRod1930
    Joined: Jun 15, 2005
    Posts: 415

    RoadsterRod1930
    Member
    from NEPA

    why didnt you z the frame behind the firewall so you could atleast almost sit comfortable in the car? but maybe your a short guy
     
  14. Nope, she's a tall girl.
     
  15. brokenspoke
    Joined: Jul 26, 2005
    Posts: 2,986

    brokenspoke
    Member

    Cause that wasnt the way it wuz done.....Kathy is a girl.....
     
  16. johnny bondo
    Joined: Aug 20, 2005
    Posts: 1,547

    johnny bondo
    Member
    from illinois


    just noticed the quad headlights and the super low grill. oddball!
     
  17. kisam
    Joined: Feb 28, 2005
    Posts: 1,922

    kisam
    Member

    Richard,
    Call me first, I am on breaker shift so who knows when I will work this month.

    I thought about it for months. It was discussed in great length with Collin Casey over out last beer together. Then I went and set in my Vette and it was almost identical. In fact, I am using all the measurements from the Vette and I think it will be fine.

    Yes and the car was built around 1957 or 1958. He was on the leading edge of the 1960's hotrods. Great insite for a young man.
     
  18. LSGUN
    Joined: May 26, 2007
    Posts: 1,386

    LSGUN
    Member
    from TX

    Are those front wheels reversed Mercs?
     
  19. Rusty
    Joined: Mar 4, 2004
    Posts: 9,485

    Rusty
    Member

    u gonna inset the master cylinder like he had it
     
  20. kisam
    Joined: Feb 28, 2005
    Posts: 1,922

    kisam
    Member

    No I used 53-56 Ford Pickup 15x5. I am not really sure if they are what Ron had on the car to begin with but they are very close.

    Yes Rusty, I am still putting thought into it, but I will have a recessed firewall with an enclosed drip tray coming from the master clyinders to the firewall. Then the aluminum firewall will be flush mounted with the cowl (as it was) and removable. My thought is no mess inside the car and I can access the MC's from outside the car.
     
  21. Paul
    Joined: Aug 29, 2002
    Posts: 16,833

    Paul
    Editor

    any updates?
     
  22. YJ4000
    Joined: Feb 5, 2009
    Posts: 288

    YJ4000
    Member

  23. Hello,Is this thing on? :)
     
  24. GaryB
    Joined: Dec 19, 2008
    Posts: 3,529

    GaryB
    Member
    from Reno,nv

    wheres Tuffy?
     
  25. Hot Turkey
    Joined: Feb 21, 2007
    Posts: 1,239

    Hot Turkey
    Member

    OK, what's going on over here?
     
  26. kisam
    Joined: Feb 28, 2005
    Posts: 1,922

    kisam
    Member

    All I did last month was pick up parts and work overtime. Took my son to Day Of The Drags and we had a blast!:) He was on Doc's pit crew and Doc let him warm up the 34 with a blower on it - talk about a smile! I have been playing catch up around the house - ever notice how much you neglect your house and yard during a build?:rolleyes:
    [​IMG]

    I did get a cool pm from this ladies nephew, Erik - power of the Hamb! He said this picture was from 1963 Norfolk Auto Show. And his Uncle was with Ron, "on the bikes".
    [​IMG]

    And tonight I got this from him! It really fills in some unknowns. This is a copy from the Norfolk High School newspaper (The Panther)article that his Uncle had kept. The Uncle thinks it was 1958 or 59. I tried to crop it but I stink, the email that I got is much clearer. Anyway, I'm loving this picture!

    [​IMG]

    [​IMG]
     
    kidcampbell71 likes this.
  27. What a neat slice of history !



    .
     
  28. abone1930
    Joined: Jan 16, 2006
    Posts: 1,324

    abone1930
    Member

    The Heap of the month article is awesome! Yea you can really fall behind on house work and yard when youre busy doing something you like :D I bet you youre son did like warming the blower motor up, my 11yr old would, my 14 yr could care less :( Weird how one can like it and the other dont. Car is lookin good keep up the good work.
     
  29. I SMELL SMOKE
    Joined: Mar 6, 2008
    Posts: 1,527

    I SMELL SMOKE
    Member

    lots of questions answered for ya . nice info for the build
     
  30. -Brent-
    Joined: Nov 20, 2006
    Posts: 7,714

    -Brent-
    Member

    Both of those items are priceless. This is an incredible time we live in.
     
    kidcampbell71 likes this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.