Hand made intakes

Here's the intake i made to adapt 3 su carbs to my 292

 

very nice at least your engine is facing the right direction, I had a terrible time getting my runners the length i wanted and clearing everything, especially the brake booster. My nice set of aircleaners I made the first time, I forgot to account for the booster, oops, about 50 hours of work down the crapper.

 

Cadillac flathead 6-71 intake, made for me by Flat Roy

 

piece of art, all hand machined?

 

CNC count?

 

I fabricated this for my Northstar powered T bucket.

Russ

 

sure why not? I know someone who makes prototype aircraft parts like that on old worn machines, every time I see him make something like it, it still blows my mind, even after ten years. I could only hope to reach that type of quality. some people just have the gift, and one of the most humble people I've ever met, can't understand the fuss over his stuff

 

This one is homemade, just not by me

 

Made the intake, air box and valve covers for this 427 High Riser.

 

Not near as cool as most here but one I'm working on to fit my 260 Ford.

 

Here is one for my model A engine

 

another for olds head Model A engine

 

This subject comes up about evey 6 months or so.

Here's a pair made by a fella named Chet Smith a very long time ago. They are a little crude and still pretty dirty. But alas too many projects not enough time.



You may note that they are one off. They will probably not bolt up to the 394 in your Mom's Delta.


I believe they were originally built to hold a pair of very large AFBs, but I could be mistaken.

 

Her's min blower manifold for a 3-71 on a 8ba flathead

 

Here is one I did for a Ford flat head in a 53 Stude. Boniville car. The Salt-2-Salt team set 3 records with this set up.

Fritz

 

Three more of the flathead. This setup was run in 2009.

Fritz

 

This is the intake I constructed for the 2010 Salt-2-Salt car. Stude V8 182 cubic inches. Set 2 more records in a different class.

Fritz

 

A couple more of the Stude.

Fritz

 

And who can forget "High and Mighty" from the late '50's

 

Blower manifold for a Nailhead in the "Strange Bird"

 

lots of creative talent here, chuckle's you'r falcon haunt's my dreams, I LOVE THAT F-N machine.

 

Old home made flathead intake from the '50's on my roadster, and some 6 banger intakes I built.

Kevin

 

Chuckles, that is one really nice manifold on that Buick!
Here's one I made for a Ford 12 sec inliner.

 

26 Ford Model T engine Split intake ports and exhaust header.

 

Nice...!

 

Here is one I built for the 4 carbs on my roadster.

 

Pics when done!!

 

I like your car!

 

Here's one I am building for fuel injection on my four cylinder.

 

The one for the Packard is clean ..
I wish I had a few more tools .