Register now to get rid of these ads!

Vintage shots from days gone by!

Discussion in 'The Hokey Ass Message Board' started by Dog427435, Dec 18, 2009.

Thread Status:
Not open for further replies.
  1. v8nutter
    Joined: Dec 23, 2010
    Posts: 110

    v8nutter
    Member

    Don'you just hate computers ? The picture didnt upload on the last post
     
  2. v8nutter
    Joined: Dec 23, 2010
    Posts: 110

    v8nutter
    Member

    This is an American style '37 Ford. This one was built in the U.K. so it has right hand drive and one or two other differences, but it still has the 221 cu in engine
     
  3. v8nutter
    Joined: Dec 23, 2010
    Posts: 110

    v8nutter
    Member

    Done it again!!!!
     
  4. v8nutter
    Joined: Dec 23, 2010
    Posts: 110

    v8nutter
    Member

  5. sixdogs
    Joined: Oct 11, 2007
    Posts: 635

    sixdogs
    BANNED
    from C

    Roller skating was a big event in the 1960's for dates, meeting people and a place for the "JD's (juvenile delinquents)" to hang out with their "hot rods". I knew no good would come of it.
    Skating to Andy Williams' "Moon River" capped off most events. During the week was open to anyone but Saturdays were for couples.

    [​IMG]

    [​IMG]

    [​IMG]
     
    Last edited: Jan 6, 2011
  6. XRacer
    Joined: Oct 13, 2010
    Posts: 33

    XRacer
    Member
    from UK

    The Baird Griffin (see post #19150) was fitted with a Maserati engine - another of Bobbie Baird's cars, the Emeryson was fitted with a straight eight Duesenberg engine.

    [​IMG]
     
    Last edited: Jan 6, 2011
  7. mart3406
    Joined: May 31, 2009
    Posts: 3,055

    mart3406
    Member
    from Canada

    -------------------
    I'm not sure how you can definitively say
    this a '55. The '55 Chevy V8s were, as far
    I know, other than by casting numbers,
    indistinguishable from '56's. '57 and newer
    blocks are easy to spot because the '57 283's
    (but not 265's) had a pad for an oil filter added
    to the casting, the '58 's had provisions for 'side
    mounts' cast in, and the '59 and newer engines
    did away with the staggered bolt pattern on the
    valve covers.

    Mart3406
    ==================
     
    Last edited: Jan 6, 2011
  8. jimi'shemi291
    Joined: Jan 21, 2009
    Posts: 9,499

    jimi'shemi291
    Member

    Right on, SixDogs! Rollerskates (not in-lines) and skating represent one of the iconic, emblematic images of the '50s and at least earlier '60s. 'Rods, duck's-ass hair, poodle skirts & saddleshoes, leather jackets, trad Rock&Roll ... many of the trappings of the times virtually disappeared in the later '60s era of Beatlemania, anti-war, etc. The HAMB is largely about keeping a dream and an old way of doing things alive.
     
  9. jimi'shemi291
    Joined: Jan 21, 2009
    Posts: 9,499

    jimi'shemi291
    Member

    (OOPS! Had to re-post, 'cause I left out a word that changed the meaning 180! LOL)
    <!-- / icon and title --><!-- message -->
    [​IMG]

    FarmerGal, sure shows that TRAD AIN'T BAD! Not at all.
    Not to sound political, but if people in general embraced
    tradition a bit more, they'd realize that MUCH of value
    happened in the past -- music, ideas, architecture. Sure,
    some old stuff wears out and NEEDS to go, but there's
    a lot worth holding onto and even treasuring, car/trucks
    included. I WONDER if this Connecticut McDonald's is
    a francisee or company-owned (?).

     
  10. Nads
    Joined: Mar 5, 2001
    Posts: 11,864

    Nads
    Member
    from Hypocrisy

    Note the swastika on the blower drive pulley
     
  11. mart3406
    Joined: May 31, 2009
    Posts: 3,055

    mart3406
    Member
    from Canada

    -----------------
    That particular Deuce is one of my all-time
    absolute favourite cars, ever. Does anybody
    have any more details on it? Who built it,
    technical details & specs, etc - and what
    eventually became of the car? Does it still
    exist today?

    Mart3406
    ============================
     
  12. Nads
    Joined: Mar 5, 2001
    Posts: 11,864

    Nads
    Member
    from Hypocrisy

    It was started by the Alexander Brothers and further modified by George Barris for Clarence Catallo. It's still around, his son Curt owns it now, I saw it in Daytona about ten years ago, it's a bit over the top but it's an icon.
     
  13. rottenleonard
    Joined: Nov 7, 2008
    Posts: 1,996

    rottenleonard
    Member

    Must be franchise ours looks the same

     
  14. sixdogs
    Joined: Oct 11, 2007
    Posts: 635

    sixdogs
    BANNED
    from C

    Saddle shoes were THE item for girls in the 1950's and early 1960's. Every girl had them and had to have "bobby socks" as well. They were just white socks folded down. Notice the hand-sewn hem of her skirt since economy prevailed.

    The second photo shows saddle shoes and bobby sox worn by early telephone company workers, probably at AT&T. Most all were young girls that worked a split shift of AM and late afternoon or early evening. My sister did because it paid well plus I figured they listened in as well. Some just worked directory assistance calls.

    If a girl rode in a hot rod, she was almost certainly wearing bobby sox.


    [​IMG]


    [​IMG]
     
  15. It may be an Icon..but I always questioned the appropriateness of it's use on that Beachboys album cover.
    No "Flathead Mill".
    And does it have the "Lakepipes" ?
    Guess the record marketing gurus didn't care much about accuracy .
     
  16. model.A.keith
    Joined: Mar 19, 2007
    Posts: 6,279

    model.A.keith
    Member

    [FONT=Arial, Helvetica, sans-serif]<SMALL><SMALL>[​IMG]</SMALL></SMALL>[/FONT]
     
  17. model.A.keith
    Joined: Mar 19, 2007
    Posts: 6,279

    model.A.keith
    Member

  18. model.A.keith
    Joined: Mar 19, 2007
    Posts: 6,279

    model.A.keith
    Member

  19. model.A.keith
    Joined: Mar 19, 2007
    Posts: 6,279

    model.A.keith
    Member

  20. jimi'shemi291
    Joined: Jan 21, 2009
    Posts: 9,499

    jimi'shemi291
    Member

    Johnny99: Sing along now. "Anne Francis stars in Forbidden Planet"
    R.I.P.
    <!-- / message --><!-- attachments --><FIELDSET class=fieldset><LEGEND>Attached Thumbnails</LEGEND>[​IMG] [​IMG]
    </FIELDSET>

    Jimi: Two decades before her "Forbidden Planet" role
    was further immortalized by a tongue-in-cheek song lyric
    in "The Rocky Horror Picture Show," Anne Francis was
    an established movie star, seemingly never lacking for
    starring or supporting roles. Here are two early ones,
    both featuring CARS!

    [​IMG]

    The hyped movie was 1953. What year's the Merc, also '53?
    Below, Glen Ford saves Anne from a speeding Chevy in '55's
    "The Blackboard Jungle." Both these pix are for sale on eBay,
    if an Anne Francis fan would like to add them to the garage
    or den wall.

    [​IMG]
     
  21. Finn Jensen
    Joined: Dec 20, 2008
    Posts: 676

    Finn Jensen
    ALLIANCE MEMBER

    If my memory is correct (and at my age?), the pad in the block casting for oil filter started with 1956 265 Chevy. The 1955 265 was unique/one- year, with external-mounted oil filter on top of intake manifold as an option.
     
  22. Dated April 19, 1957 Chevrolet published the 24 page "1957 CHEVROLET STOCK CAR COMPETITION GUIDE" that listed all the part numbers and suggested modifications to build your own Black Widow race car. The 6 lug hub, drums and wheels needed are listed in there, along with a truck style 6 lug rear axle that was made to be a direct bolt in replacement for the original car rear end. To say that you would just slap truck hubs on the original spindles would be an over simplification, since stronger steering knuckles, wheel hubs and brake drums were usually replaced at the same time, for greater durability, as the guide so aptly puts it. No doubt there were some local racers that adapted whatever they had at hand to build a car that would take the same abuse however.
     
  23. mart3406
    Joined: May 31, 2009
    Posts: 3,055

    mart3406
    Member
    from Canada

    -----------------
    I've had '57 265's with no cast in oil filter
    boss and with the optional top-mounted
    by-pass filter.

    Mart3406
    ======================
     
  24. John F
    Joined: Sep 9, 2010
    Posts: 109

    John F
    Member


    I love the car carriers!
     
  25. John F
    Joined: Sep 9, 2010
    Posts: 109

    John F
    Member

    A pair of SU carbs
     
  26. Ghostcruiser
    Joined: May 3, 2007
    Posts: 319

    Ghostcruiser
    Member
    from NE Florida

    Same here, Nads....that's about the same time I saw it in Daytona at the Turkey Rod Run; I took a few pics of it...if I can find them in all my crap, I'll post a few...:)
    Rob
     
  27. bluemoose
    Joined: Dec 21, 2008
    Posts: 305

    bluemoose
    Member

  28. indybigjohn
    Joined: May 22, 2008
    Posts: 1,713

    indybigjohn
    Member Emeritus

    I've been told that the guy running in the photo is Junior after being thrown out of the car.

    Also, no better thread than this one. Keep it going, including the diversity. That's one of the things that makes it so cool. (JMO)
     
    Last edited: Jan 6, 2011
  29. sixdogs
    Joined: Oct 11, 2007
    Posts: 635

    sixdogs
    BANNED
    from C

    Uhhh, Phil and Don...
    I think one of them died recently.


    [​IMG]


    [​IMG]
     
  30. sixdogs
    Joined: Oct 11, 2007
    Posts: 635

    sixdogs
    BANNED
    from C

    The one and only Wally Parks and the one and only Roy Rogers...


    [​IMG]
     
Thread Status:
Not open for further replies.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.