Register now to get rid of these ads!

Projects Model A

Discussion in 'The Hokey Ass Message Board' started by pennafxu, Nov 9, 2010.

  1. Where in Warks were you born chap.....I'm there now!!
     
  2. pennafxu
    Joined: Aug 20, 2010
    Posts: 2,263

    pennafxu
    Member
    from Kentucky

    I was born in a little town called Nuneaton, near Coventry. I would see the Jaguars and Astons getting Test Driven on the M1 and around the plants and my life was never the same... So much history so much beauty, I really miss England sometimes. I truly feel that England with all of her Marques has ruled the world in so many categories...

    Racing: Bentley/Jaguar/Aston
    Sports: Bentley/Jaguar/Aston
    Luxury: Rolls Royce
    Off Road: Range Rover

    It is astounding the amount of talent that is from this little isle! Lets not forget the Legendary Hilman Hunter... OK just kidding on that one lol
     
  3. I used to live in Bedworth...Born in Coventry.....now living between Rugby and Cov...You still see Jags and Astons being tested around here...not really the same snce the XK220 went down the pan, now they are all abit "footballers wives cars"!!!..Prodrive is not far either so you get to see the full race Subaru's hooning around on test!! and also the new Triumph motorbikes!!...actually there are lots of design/race/developement companies around here so you constantly get to see stuff way before general release......Good on you for taking advice off the HAMBers on your project...and it's gona be a damn nice rod when it's done...keep the duel trans though just for the kookyness of it!!LOL
    nowt wrong with a Hillman Hunter......not much right either!...then again could be a Allegro!!
     
  4. kennyrodg
    Joined: Sep 4, 2010
    Posts: 2

    kennyrodg
    Member

    Pennaxfu,
    Rejoice in the fact that your folks had some foresight and took their family away from the shit hole that is the UK. This place is screwed. My folks always used to harp on about England being the greatest country in the world and now, My mum thinks it's a shit hole too.These are sorry times buddy.
    anyhoo, subscribed to your thread as I'm embarking on a first build too, keep up the good work and the good spirit.
    Pete,
    UK.
     
  5. pennafxu
    Joined: Aug 20, 2010
    Posts: 2,263

    pennafxu
    Member
    from Kentucky

    Hey thanks for the words m8! We used to have a saying about those Beduth Boys!! I won't expound as it could cause an international controversy... lol

    Yeah, my Mum tells me about the cars her and dad owned. She used to live around Porto and my dad was a fuckin tool who didn't know oat bout shit... My Mum was the car buff!!
    They had a Morris Oxford (navy blue that Mum would polish for hours when my eldest sister was born, she would sit her on the hood and detail it for hours per her recollection, and then go cruising at night on the boardwalk) My sister couldn't say Morris Oxford, and instead would say "Morry Ubub." Then she had a tangerine Morris Marina. We then got a Chrysler Avenger (delivered from America) our first new car! it was parrot green!! That's when Dad left us when I was 6, cashed in the life insurance and fucked off, never to return! Left mum with 4 kids at the age of 35 :( Motherfucker I never ever saw him again or have forgiven him. I have a hole inside because of that... The cars and bikes help to fill the void but the emptiness remains. Mum then had to sell the new Avenger for pennies on the pound and we bought the ol' rusty Hunter green Hilman Hunter home. The thing had more bondo on it than paint, mum would bribe the mechanic every Christmas with a bottle of Ouzo to pass the MOT(he was a Greek guy) I remember this well as I was the delivery boy! I slipped in the ice and dropped and smashed the bottle one year and got a beating I never forgot. After the Hunter, we bought a Morris Ital, that seemed like a damn phantom back then for us! It had a radio!

    Anyways great memories!
     
    Last edited: Jan 26, 2011
  6. pennafxu
    Joined: Aug 20, 2010
    Posts: 2,263

    pennafxu
    Member
    from Kentucky

    Not exactly my choice, but worked out in the end m8! Good luck on your build, what are you making?
     
  7. pennafxu
    Joined: Aug 20, 2010
    Posts: 2,263

    pennafxu
    Member
    from Kentucky

    okay back to bidness... finally dug out the polishing bits :)[​IMG]
     
  8. pennafxu
    Joined: Aug 20, 2010
    Posts: 2,263

    pennafxu
    Member
    from Kentucky

    dumped em' out on the tool cart...[​IMG]
     
  9. pennafxu
    Joined: Aug 20, 2010
    Posts: 2,263

    pennafxu
    Member
    from Kentucky

    It's showtime!...[​IMG]
     
  10. pennafxu
    Joined: Aug 20, 2010
    Posts: 2,263

    pennafxu
    Member
    from Kentucky

  11. pennafxu
    Joined: Aug 20, 2010
    Posts: 2,263

    pennafxu
    Member
    from Kentucky

    removing oxidation and casting flash...[​IMG]
     
  12. pennafxu
    Joined: Aug 20, 2010
    Posts: 2,263

    pennafxu
    Member
    from Kentucky

    grinders grease...[​IMG]
     
  13. pennafxu
    Joined: Aug 20, 2010
    Posts: 2,263

    pennafxu
    Member
    from Kentucky

    got bored and hit an area with black, then tripoli... Starting to show but a long ways to go...[​IMG]
     
  14. pennafxu
    Joined: Aug 20, 2010
    Posts: 2,263

    pennafxu
    Member
    from Kentucky

    close up... no there yet but getting there!![​IMG]
     
  15. Are you using Tallow grease for your abrasive rolls?
     
  16. pennafxu
    Joined: Aug 20, 2010
    Posts: 2,263

    pennafxu
    Member
    from Kentucky

    no its called grinders grease... Maybe same product different name??[​IMG]
     
  17. Here's where i get my supplies:

    www.bright-works.com
     
  18. pennafxu
    Joined: Aug 20, 2010
    Posts: 2,263

    pennafxu
    Member
    from Kentucky

    Hey thanks for the tip playboy! will keep in mind next time :)
    PS ur T keeps me going on those low energy, I don't want to fucking work on my shit today afternoons! lol
     
  19. daddio211
    Joined: Aug 26, 2008
    Posts: 6,012

    daddio211
    Member

    Did Kentucky get buried in snow too? I need my Whisky T fix!
     
  20. grey46
    Joined: Aug 31, 2008
    Posts: 166

    grey46
    Member

    Cool car I love T's have had a couple over the years
     
  21. pennafxu
    Joined: Aug 20, 2010
    Posts: 2,263

    pennafxu
    Member
    from Kentucky

    Been focusing on some Choppers right now!! :) I miss working on the T, but business is business... :( Need the cash flow coming in for my weird and wonderful creation... :D I have half of the intake polished now, I will post pics as soon as I get a chance... Also Engine is ready to take to machine shop. Just need to get her loaded up...

    Thanks for the words!
     
  22. Flat-Foot
    Joined: Jul 1, 2010
    Posts: 1,710

    Flat-Foot
    Member
    from Locust NC

    Wheres the progress? You were flying along for a while there.
     
    Last edited: Apr 21, 2011
  23. KWashburn
    Joined: Jul 23, 2006
    Posts: 109

    KWashburn
    Member

    I think I just watched somebody go from hobbyist to knowledgable builder in one thread. Congrats man, this looks like fun.
     
  24. pennafxu
    Joined: Aug 20, 2010
    Posts: 2,263

    pennafxu
    Member
    from Kentucky

    Ok guys, I'm finally back in action... Got that bike rapped up, and ready to go...
     
  25. pennafxu
    Joined: Aug 20, 2010
    Posts: 2,263

    pennafxu
    Member
    from Kentucky

    To come my friend...


    thanks bro...
     
  26. daddio211
    Joined: Aug 26, 2008
    Posts: 6,012

    daddio211
    Member

    Well its about damned time!
     
  27. Flat-Foot
    Joined: Jul 1, 2010
    Posts: 1,710

    Flat-Foot
    Member
    from Locust NC

    Glad to hear you are back at it!
     
  28. pennafxu
    Joined: Aug 20, 2010
    Posts: 2,263

    pennafxu
    Member
    from Kentucky

    lol...

    thanks....
     
  29. pennafxu
    Joined: Aug 20, 2010
    Posts: 2,263

    pennafxu
    Member
    from Kentucky

    So the guy I did the bike for is also a Hotrod guy... This is the truck I was driving around... an old Ford... it was really fun and got me juiced up again :)

    [​IMG]
     
  30. pennafxu
    Joined: Aug 20, 2010
    Posts: 2,263

    pennafxu
    Member
    from Kentucky

    rappin up his bike... I have long hair now!:eek:

    [​IMG]
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.