Willys more dimensions needed

Could someone measure their Willys body for me please, I'm needing the measurement from the outside to the outside across the rear of the doors like in this pic, thanks

 

hi steve, i got 56,1/2" outside to outside,[as per your diagram,] not sure how "correct" my body is,as its very old, it will be interesting to see how close to any others that measurement turns out to be,your builds coming on real well, hope this is of some small help.

 

Thanks for that mate, I'm hoping some others will chime in.

 

I measured mine and I got about 59"

 

58 1/2" here

 

Checked mine 59" you could also ask Wayne S

 

Original 1940 Willys coupe below - never a gasser, original floors unmolested - never messed with. Outside of B pillar to outside of B pillar 58", outside quarter panel to outside quarter panel 58.5". Beware of measurements taken off cars that have had modified firewalls and floors - distortion is easily caused....

 

Thanks mate, thats great

 

Thanks thats what i have on mine

 

Thanks Keef, Couldn't get Wayne on the fone, but will check his also.

 

Thanks Guido, mine measures the same 58.5" but is a bit springy with no floor in it so wanted to check.

 

Just went out and checked mine to see how it compares to everyone else. My coupe and sedan are both 58.5. Keep up the good work

 

Thanks bud

 

Another dimension needed if you could guys, as in pic

 

Got your PM - will do as soon as I get at the Willys....

 

Thanks Guido, your a star mate.

 

Incase anybody else needs t know the measurement is 50.5"