5 spoke aluminum wheels pics please post

Drag mag I believe. There are a few variations. Here is some more information.

 

Love the five spokes.

 

ET 14x7.5-Deep

 

raw centered 200-S are my favorites.

 

I have superior supermagII's but I don't have any pictures, but they are for sale.

 

How are supermag 2's different than supermag 1's ?

 

These are the Ansen 5 Spokes (15 x 8.5) that I got off KiwiKev a month or so ago. This is how they looked when I got them and I just got them back from getting the curb rash welded up and filed. They should be polished this weekend and perhaps on the Roadster by then too. Updates are coming.

 

I just got these I feel lucky......

 

15x8 Fenton hustlers and 14x6 Torque Thrust (old)

 

Rough cast TT D's on my old 5W

 

Here they are rubbed out with 1000 grit. Should have it to 2000 by the end of today.





You can check the progress on my roadster through my thread here:

http://www.jalopyjournal.com/forum/showthread.php?t=346968

 

I like that 1000 grit finish..Are you going to leave the spokes alone?Just natural patina,I dig it....

 

Some more T 70

 

15/7 American TT70 Original finish

 

Sorry, can't be ET III, probably ET IV.

Steve

ET III on my 68 Charger Rt

 

These are the Ansen's after I finished bringing them back and painting them. I don't own them or the car anymore but I would love to buy them back since I spent so much time polishing them hahaha!!!!

 

I picked up a pair of these today at a swap meet. I believe they are M/Ts. They are 14x6, 5 1/2bp. Now I just need to find 2 more......

 

They look cool with the redlines also!!

 

ETIVs were 5 slots, not spokes. ETIII had a Halibrand look w/raised edges. My guess is ETIIs. Can't remember what the ETI looked like...

FWIW. Marcus...

 

t70R

 

I found only two T70 for the small 4" pattern.


As a T70 guy, Have you run across any? They are easy to spot the 4" pattern because that center hub that holds the chrome cap has relief notches casted in, to clear a lug wrench.

 

I think there are some on the AKH site... Funky lookin @ 14/7
I dig all 5 spokes....thank you very much.

 

lots help keeping up with cleanup.........

 

I found this in a 70's catalog

 

American Racing 200s 15x10 in the back 15x7 in the front

 

I have a pair of Ansen 15x6 with 5-1/2" pattern.

 

Here's my 15x10 ET 5-spokes. You don't see these very often. I had the front curb lip machined off flat to make them look more like an early 60's mag Torq Thrust. The polishing wasn't cheap, with the spokes being fairly deep, but I think it was worth it. I hope to use these on my next project.

 

Bought this set of original 200s 15x4's and 15x10's in 5x4 3/4 bolt pattern at the Pate Swap Meet in Ft Worth last weekend. I couldn't believe it when I picked up one of the fronts and it said PAT PEND on the back side !

Turns out the guy had owned them since 1972 !! They are in amazing shape too. I'm still tripping out over them. Sorry for the crappy cell phone pictures.







-Aaron

 

pictures ain't loading... How about using the manage attachment feature??? Thanks!

 

Hardluck Nice score!!!