Project 33

Nice car and great work!

 

'lotta nice work! Sweet!!

 

impressed... looks very good. I like the color that you chose.

 

Great post mate...I really enjoyed that.

 

Vey nice build! Love the deatiled chassis and Engine combo with the bare metal body.

I only see one problem...you put the steering wheel on the wrong side!

 

Great build...Congrats....Could you move the steering column to the left side and ship her to OKlahoma?

 

funny how you all heep mentioning the wheel on the wrong side. We have the same problem when we bring a car from the states. Must be in shipping.....

 

Great job! You guys sure can move on that build. Keep it up!

 

Awesome job so far on a great car!

Congratulations!!!

 

Very Kool car, Nice work done by all!

 

Looks great! In the one pic your dad was tossing back a cold one.. was that a local beer?? Heard that XXXX is the beer to drink down under!! (from a mate in Charters Towers!)

 

xxxx is for the boys from queensland I prefer Melbourne bitter

 

Thanks for sharing.
Nice job....

 

Awesome looking car

 

Looks great---loved the painted chassis with the drive train in---what's next???

 

Great job and Thanks for sharing

 

And some Vegemite sandwich with the bitters...

 

Definately!!

Whats Next... I Probally should start another thread for the next one we have started......

Check For "27 T coupster" on the board

 

Thanks for the update. Your dad is going to have a ball with it when it's finished.

Frank

 

Man I can't even complete one car! cool

 

Seat belt mounts made tapped 7/16 and welded in the body.

 

Front section of floor welded in and cleaned up.





Speaker mounts for some tunes hidded well up under the dash..

 

Filled in the ends of the dash last night.














Also filled in the section ninside the door at the rear where the panel Flames made me joins the floor and pillar. Had to wait until now to do it as the floor has been welded in. Am gunna stitch a suare bar up pillar between the hinges so that when standing outsid you cannot look through the door gap.



Wooden template:

 

Roadster

 

Looks beautiful and love the maroon chassis color. I'm doing pretty good, I read 2 1/2 pages worth and you only lost me twice. Please explain to this Yank what the heck is a beaver panel and " swaged panel behind the channel" are. Cheers !!!

 

Nice job, keep the updates coming!

 

Beaver panel I was refering to is the panel below the decklid at the rear.

Swaged panel is the panel with the 3 rolled lines in it behind the door. Visible when opened. The aussie bodies never sat down past the chassis rails we had a Spear pressed section in this area instead. So for us it is sort of channelled.

 

With the doors shut you could still see daylight throough the gap. So weused a piece of 10mm solid square and welded it down the pillar. this had the desired effect and the car looks a lot better from the outside now.






Tidied up the floor and bits and started to etch prime as I'm finished each area.

 

Got the kick panels back from drew a fellow club member tonight and the padded fire wall.. Another bloody lovely piece of work and another piece of the puzzle completed.

 

More work on the interior of the ol girl. Went around to flames yesterday and swaged up some panels and put her together this morning...




Floor in..