Who is working on a pontiac ?

If so what year and model is it

 

working on 2 right now a 31 pontiac 5 window coupe and a 65 tempest stationwagon

 

Always working on the 40 ponti HOT ROD coupe

 

53 Chieftain. It's a 4 door but have plans for a mild custom with a different than the norm drive train. Too hard to find parts here to keep it stock anyway.

 

The plates say 54 as they were badged a 54 cause they took so long to get across the water!

 

'53 Catalina - almost done
'60 Catalina - Long way from done
'63 Lemans - Almost forgot I even had it still.

 

All the BIG/DIFFICULT stuff got done on my '57, but I still have some work. Click on the link below and you can check the whole build.

 

37 2dr slant back, 69 307 sbc auto nova stub and rear end.

 

1963 Pontiac Grand Prix, restoration almost done.

 

My dad and I finished his 38 this year.
Matt

 

49 Poncho

 

like the 49,I just picked up a 50 like that,Ialso got a 49 convert

 

Sweet!

 

Bob , car is looking fng good ! That photo of the front are awsome !!!

 

Here is my Pontiac projects, none of which are getting any attention these days...

 

'60 Catalina Safari nine passenger wagon here...drivable with new original upholstery, carpet is next.

R-

 

Working on a 1931 Pontiac coupe. Also have a '59 Bonneville sport coupe since 1977.

 

'67 got, running;

'28 4 door in progress (with Pontiac 400)

Bruce

 

Hopefully no more Pontiacs for awhile! I'm a Ford guy but one of my best friends is into Pontiacs so I've had a Pontiac of some type in the shop for the last 10 years till recently. I finished building his 39 about 3 years ago and started on his 53 right after, finished it in September. His wife tells me she'll divorce him if he has me start another project for him!
Fine cars, just not as easy to find parts for as Fords, no reproduction stuff. On the plus side when you do find the parts they are generally reasonable, not much demand for them.

 

My 63' Lemans convert. Almost done, really, really close...

It has a stock body, mild custom interior and a wild slant four/four speed.

 

50 Pontiac 2 Dr Sedan (like a chevy fleetline) - 350 Chevy/700R4/Nova rear/Monte Carlo front clip/77 Cad tilt and telescope column

 

ot but heres my 69 ,,,Still have to put new package tray in,But Ive been working on the A ,Non stop.Car pretty much sat all summer

 

Pics of our '31 from yesterday

 

1949 fastback

 

1949 fastback

 

I am rebuilding the carbs (Tri-Power) on my 65 GTO, they haven't been done in over 15 years, the front and rear ones were dumping a lot fuel, turns out both floats were cracked and full of gas.

Someone told me years ago to put Chapstick on the gaskets before assembly so the carbs will come apart easily without damaging the gaskets. I did that the last time I rebuilt them and it worked but I am still going to replace them.

 

1950 Pontiac hardtop in the middle of getting the mild custom treatment

 

looks like a lot of you are working on a 50's pontiac

 

48 Pontiac Convertible! Just got it running this Fall. Pics when I get back from work Wednesday.

48 Poncho

 

Well I fully intend to get some more recent shots of my Poncho as soon as I get the camera working again. Here it is one more time only now it's dropped 6 1/2 inches in front and 4 in the back and now has my HAMB tag topper on front.

48 Poncho