Register now to get rid of these ads!

A Rat rod is one thing but!!!!!!

Discussion in 'The Hokey Ass Message Board' started by bdotson, Jan 29, 2012.

  1. draggler
    Joined: Jan 6, 2007
    Posts: 238

    draggler
    Member

    That is purty clean and straight for all that rat wizz!
    Hmmm?
    Ratwizz special! hah hah . Looks pretty good
    Run the 216 till she passes,t-5,open drive rear end,better front brakes,split master cylinder.
    Sounds like youve got it figured out !
    Happy motoring!
     
  2. bdotson
    Joined: Sep 28, 2011
    Posts: 160

    bdotson
    Member
    from texas

    Any ideas on running a mustang front being as it is going to be a buget driver pros and cons on mustang? pros rack and pinion, disc brakes, good ride, later model parts, cons??
     
  3. mickeyc
    Joined: Jul 8, 2008
    Posts: 1,404

    mickeyc
    ALLIANCE MEMBER

    Rats, yuck! rats are the only animal that pees in their own nest. I had a set of steel wheels stored in a shed, and made the mistake of laying a small tarp folded on top of the wheels. Rats made a nest in the tarp and the dripping from them totally destroyed all four wheels. Rat pee is very caustic.
     
  4. 49ratfink
    Joined: Feb 8, 2004
    Posts: 19,436

    49ratfink
    Member
    from California

    a real nice set of 4 could go over $100.00 easy. I've had a few, for as little as $10.00 at a swap meet, probably averaged 20 bucks each to get the set I had on my car I sold. but I'm a cheap bastard and like looking for bargains.
     
  5. ytt49
    Joined: Oct 7, 2010
    Posts: 373

    ytt49
    Member
    from socal

    nasty mess to clean up but looks like a real solid start for build
     
  6. Willy301
    Joined: Nov 16, 2007
    Posts: 1,426

    Willy301
    Member

    Great, now you made a bunch of rats, homeless. D-con makes some "survival packs" for them until they can find a new home...kinda like government cheese.... =D
     
  7. endlessearth
    Joined: Jul 26, 2010
    Posts: 192

    endlessearth
    Member

    Ugh. what a clean up job. I would take the longest hottest shower ever after digging out that mess. Car looks like it was very worth it though. I am looking forward to seeing how it evolves.
     
  8. x2..
     
  9. 50specialdeluxe
    Joined: Nov 23, 2009
    Posts: 88

    50specialdeluxe
    Member

    You've obviously never met my English Bulldog, Beefcake. Crate training her was a lesson in futility as she'd pee all over the crate and lay in it just to prove her point....
     
  10. Pop-Rodder
    Joined: Oct 6, 2011
    Posts: 325

    Pop-Rodder
    Member

    After all that, it would be a shame not to put a "Rat" motor in it...
     
  11. The37Kid
    Joined: Apr 30, 2004
    Posts: 31,892

    The37Kid
    ALLIANCE MEMBER

    Gee, It smells awful. Nice find.
     
  12. Rick Sis
    Joined: Nov 2, 2007
    Posts: 710

    Rick Sis
    Member
    from Tulsa OK

    Awww, you guys....I'm pretty sure I saw a dryer sheet in the pics, so it's probably fresh as a daisy in there.
     
  13. x2 with our doxie/terrier mix. lesson in futility is right...... Nice Chev, I owned one years ago, yes it was a gasser when I bought it, I made it a dd. Wish I still had it........
     
  14. tubman
    Joined: May 16, 2007
    Posts: 7,531

    tubman
    ALLIANCE MEMBER

    I can't tell from the pictures, but is that a Standard or a deLuxe? The reason I ask is because they came with two completely different front suspension systems. The Standards had a straight axle, while the deLuxes had what Chevrolet called "knee-action". Years ago, I had a friend that had one of these with knee-action. It was not one of the General's better ideas. I don't know about today, but back then parts were impossible to find. We ended up putting a straight axle out of a Standard into it. It was a great improvement. If you have a straight axle, you should probably keep it, but if you have knee-action, it will probably have to be changed out. I have never been a fan of sub-framing in general and MII's in particular, but if you have to go that way, I would check around to see who has done one and what they used and how it worked out.

    Back in the early '60's, this guy and I car-pooled to the University of Minnesota. One week, I would drive my '52 Ford, and the next, he would drive that Chevy. Every day, rain or shine, from September through May, 15 miles each way. Both cars handled it well.:)
     
  15. bdotson
    Joined: Sep 28, 2011
    Posts: 160

    bdotson
    Member
    from texas

    This car is a standard it has the axle. A dead give away is the one tail light on the left. If you look at the right tail light someone added you will see it is cocked. That is because it is from a sedan not a coupe.Back to your point it is a standard with a well worn axle and the small outter bearings. What are the down falls of the mII for a driver car? I am thinking of saving money. I have a old M II here all stock ?
     
  16. go-twichy
    Joined: Jul 22, 2010
    Posts: 1,648

    go-twichy
    BANNED

    home wreaker! so thats where that term comes from!
     
  17. Bigcheese327
    Joined: Sep 16, 2001
    Posts: 6,703

    Bigcheese327
    Member

    That's a dead ringer for my grandfather's first car. I'd love to own a '38 Chevrolet.

    On a coupe, I'd be leaning toward a mild, late-fifties/early-sixties, street-driven hot rod look: cool metallic color (green or blue), nose-down stance, chrome steel wheels, 389 Pontiac or Buick Nailhead, and a four-speed. Don't forget the T&R Naugahyde.

    -Dave
     
  18. fat141
    Joined: Jul 30, 2006
    Posts: 1,575

    fat141
    Member

     
  19. Dam that things been eating mcdonalds or what?
     
  20. Sure glad that this car was not a barn find.... Neat car.
     
  21. JEM
    Joined: Feb 6, 2007
    Posts: 1,040

    JEM
    Member

    That's a whole ecosystem there. Get those things out of there before the Feds decide one of those carcasses is a protected species.

    We all know what part of the human anatomy opinions resemble...but if stock doesn't float your boat, it looks like a great car to park on top of a large pile of Jag XJ suspension.
     
  22. Well that being the case I have a "rat rod" motor in the basement. It had a nest in one of the pistons. :eek:

    Pretty cool old heap great start for a real hot rod.
     
  23. DJLATIN
    Joined: Sep 16, 2010
    Posts: 612

    DJLATIN
    Member

    i can't stand mice nor rats. i had to sell off a couple of cars since they made their home in the projects.
     
  24. Six Ball
    Joined: Oct 8, 2007
    Posts: 6,460

    Six Ball
    Member
    from Nevada

    Here's a couple for inspiration. The blue one, a'39?, has a 302 GMC. The other is of one of our forerodders. The last picture is of my air defreshener. I see you already have some of those.
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  25. Bigcheese327
    Joined: Sep 16, 2001
    Posts: 6,703

    Bigcheese327
    Member

    The blue one is a '37. Only '37s and '38s have that character line in the side. The '37 has vertical grille bars and the '38 has horizontal.

    -Dave
     
  26. Cowtown Speed Shop
    Joined: Sep 26, 2010
    Posts: 1,192

    Cowtown Speed Shop
    Member
    from KC

    AAWWMMMM.......I am telling, You said the "R" word......That will be a $5.00 bill in the swear jar, I can give you the paypal link if you don't have it......LOL
     
  27. bdotson
    Joined: Sep 28, 2011
    Posts: 160

    bdotson
    Member
    from texas

    Got back on the 38 today I had my Dad come over and help,he loves old cars and it was his 81st birthday. I thought it would be a great way to celebrate so I took a day off work and he and I spent the day together. I will never forget this day with him. [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG]
     
  28. bdotson
    Joined: Sep 28, 2011
    Posts: 160

    bdotson
    Member
    from texas

    and still more pictures as the old engine comes out [​IMG] [​IMG] [​IMG] [​IMG] [​IMG]
     
  29. DocWatson
    Joined: Mar 24, 2006
    Posts: 10,288

    DocWatson
    ALLIANCE MEMBER

    Don't take this lightly. There a number of illnesses that can be caught from rat urine and feces. Leptospirosis is probably more common and is seen in most country's. It is a bacterial disease that affects humans and animals.
    One of the biggest issues is that it is still relatively a 'new' disease and as a consequence is more often than not miss diagnosed.
    It begins with severe common cold symptoms and without the correct treatment leads rapidly to kidney damage, meningitis (inflammation of the membrane around the brain and spinal cord), liver failure, respiratory distress, and even death.
    I watches two people die from this 12 months ago so believe me it does happen.

    Then there is the good old Plague a bacteria based illness, this is still a live disease within the U.S.A.

    Rat-Bite Fever

    Salmonellosis

    Hemorrhagic Fever with Renal Syndrome (There is 4or5 other versions of this)
    Tularemia (Read this one!!)

    This shit is no joke and is killing more people every year, don't add your name to the list!

    Doc.
     
  30. Weasel
    Joined: Dec 30, 2007
    Posts: 6,698

    Weasel
    Member

    What he says plus Hantavirus - ask me how I know. I have had it about five times before I figured it out after researching on the internet and got shit scared at what I read. I chewed my family doctor out for shrugging his shoulders when I told him on more than one occasion of my symptoms. 104˚ fever, kidney pain passing blood in urine - feels like you're pissing razor blades, blinding headache, raging sore throat, burning up internally with violent shivers. It is airborne so if you disturb, vacuum or sweep the droppings up or touch the urine it becomes airborne and you risk inhaling it. Do NOT put this under 'it won't happen to me' and 'never had a problem' label. This could kill you....

    ONE IN THREE PEOPLE WHO GET HANTAVIRUS DIE FROM IT!
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.