Pay it foward = free parts for HAMB members

Why don't we do a pay it forward in the wanted section? we all have something for those Guy's. post something you have Put in the header (who needs it?)

 

'Cause we are doing it here .

I'm guessin' the Boss is good with it, as we're giving stuff away to someone who needs it, and maybe don't want to, or can't afford to buy.

 

Ok, so I've figured out what I NEED...

Looking for a good strong starter for a 1953 Chevy 235, as well as a water pump for the same engine. Mine thinks it's funny to puke up all the expensive coolant I just put in it...

I'm a "CARcheologist" for a living, that is, I hunt parts for people from all over the world, and I pick up a lot of "extra" stuff along the way. If you've got what I'm looking for, I may have something YOU'RE looking for already out in my workshop.

 

Spring cleaning guys...help someone else out. Thanks again Steve! It was terrific meeting you and the rear end will fit perfect in my 24 Dodge project.

 

V8nova64, where are you located?

 

Just a wee bit away for that 6 cylinder

Thanks for offering it up

 

Ok, try this. A running Ford 'Kent' series 1600 crossflow, removed from a 1979 Fiesta. Now, the Fiesta bellhousing is slighly different than the Pinto one, so a RWD trans would require some fab work. But, nice little roadster engine with lots of aftermarket (Formula Ford,etc) support.

FREE !! Detroit area.

PS... Have some Fiesta 4-spd FWD transmissions too, plus misc Fiesta parts!

Steve

 

bump it up to the top with some pontiac hub caps. Not the greatest shape few dents in each one and could use a good polish. I would say they could be good enough to run on your car. free to good home

just pay the shipping unless someone has a flathead head to trade shipping with. (junk head is ok to, just want to build my son a coat rack out of one)

 

Just posted these up for the Michigan guys.

http://www.jalopyjournal.com/forum/group.php?do=discuss&group=&discussionid=30137

 

pm sent!

 

Time for me to jump in!
here are some seat{lap} belts,i pulled em out of of our retired school buses,a member wanted a set- but i deleted alot of my P/M's & lost track who wanted em,so here they are again,
I have 7 of the red,2 matching black & 3 ODD ONES,3 gold/tan,the ends are L-shaped but we bend em out at work all the time.
please take only what you will use!please post which ones you want & P/M me,
{as i stated these came out of a retired school bus so these CAN NOT be sold!}
all the BLACK & REDS are gone!-thanks guy

 

the black ones,& i can not ship but only on weekends &please pay for shipping with postal money order,
chuck

PENDING----& are gone to kevin--AKA--metalix_421

 

pm sent on the black belts

 

Kevin piped in first,it's his pick-chuck

 

I'd like to get 3 red ones off of ya.

PM Sent

 

3 reds for Ken-AKA {Probesport} sent out 4/28/12
leaves 3 gold/tan & 4 reds left, PENDING----chuck

 

Looking for a front valance for a 65 F350. I have some items I will post up tonight. I know one of them is some engine adapter mounts to put a 289/302 in a early ford.

 

Mounts are gone.

 

I could use the remaining 4 red ones off of ya. My newly acquired '50 plym has zero...

PM Sent

 

their are yours--chuck
P/M sent

 

If I ever find my plates, I will have some washington plates up for grabs. Early 60's, 50's, 40's. I will report back here once found.

 

Could I possibly have dibs on those plates?

 

Definitely. I may split them up in to pairs to share the love, but you will be the first to know when I finally find them!

 

Being a 206 man in need of some 50's plates, could I have second dibs?

 

noted.

 

This will likesly get its own post- but Im going to give the pay it forward thread a shot. I am looking for a single steel wheel. I need 5 on 4.5 and inside bead width of 4.5 inches. As it sits now, Im building a 3 legged dog. The wheel I am trying to match has the drop center but is old enough to have a riveted center. I would say pre 65ish. It also had the 3 mounting clips formed into the center for the hubcap. Does anyone have an extra one?
John

 

wanna throw me into the mix for late 40's or early 50's plates?--chuck

 

messaged

 

If the 3 tan ones are not spoken for, I'd like um.

 

I have a single 32 Willys Overland hubcap for anyone that needs it. I had a pair of um and the other one may show up in the near future.