Who is working on a pontiac ?

Yeah agree, it was only that my dad had a sbc there, recently i have found a pontiac 400,so it makes alot of sense to stay pontiac with pontiac.

 

1960 2 door HT Catalina- done except for normal maintance-
<a href="http://s50.photobucket.com/user/2bubbas/media/1960%20Pontiac%20Catalina/100_4439.jpg.html" target="_blank"></a>

 

^ love a 60!

 

Doing a 62 fireball Roberts car for the street
Will post pics soon

 

Latest progress on my 48 convertible.....

Rear end has been narrowed and set up with 4.10 posi and 31 spline axles (started out as Lincoln Mark IV). New Rock Valley gas tank........Been running gas lines and brake lines to back of car and can finish them up when rear end and gas tank are fully installed...........Completed running hydro-boost lines to rack and pinion, power steering pump and back to master cylinder.......Just received my new Brassworks radiator with their shroud/spal fan and overflow along with AC conderser. Doing mock up with the radiator now to make sure AC lines will fit properly with core support........Trying to get the car to run and roll on its own so i can begin working on body and dash.........Will do full mock up and shake down before blowing apart to make pretty...........

 

went kustom

 

Couple of pics when picking up my 51 from the panelbeater today.

 

Just started on my 50 Catalina

 

I got my 53 about to get an engine swap

 

Dude bitchin stance...did you have to modify the floor to get that low in the back?

 

just aquired my 1950 coach ( not coupe ) 2 ewwks ago , and still surveying the work needed , have to find floor pan braces and inner rockers as I want hem to be solid , rest of body is 95% , someon already did the subframe conversion in the front , I will 4 link it in the rear for 15" wide tires , they cut the wires , no motor ( set up for a sbc) I do PMD and have several motors to choose from . going to be a long project .. mostly money holding it back .

 

the straight 8 & hydra-matic are out...finally shit the bed. working on some oldschool cool now.

 

Nice man, can wait to see what you got brewing!!

 

My project this summer

 

Beautiful!

 

bump

 

Does a '62 389 and Jetaway in a '55 Chevy truck count? I plucked it from my ex-girlfriend's totalled Star Chief.

Posted using the Full Custom H.A.M.B. App!

 

sometime in the next decade this pile and that pile may actually turn into something.

 

My ol' poncho from 1947, have replaced the straight six with a straight eight. Keeping the three-speed for now, looking for a newer third member to get it a bit more highway-friendly. I might keep it like this, or maybe slam it. Haven't really made up my mind yet since it is a true "survivor".

 

Working on and driving

 

1948 which is getting a new driveline and mild customizing. Came out of California last year with no engine but new interior.

 

'39 parts body, and the ugly project ('39)

And the '49 straight 8 streamliner I saved from the crusher for $300 this Summer

 

that 48 looks rust free.

 

I have a 66 Catalina 2dr HT. RestoMod, boxed frame from GP, posi, front disks, 1970 455 with a 66 tri power. will be a 4 speed with AC and factory tach. I also have a 65 pontiac 2+2 to do after my 66 is done

https://imageshack.com/i/0oo8qgj

 

.......

 

I've been working on a 1970 GTO.

 

^Really!?^

...wait for it.

 

1955 Safari ,drove it some last year , but still have a few bugs to work out .