Site Links Affiliated by SOVRN.
Register now to get rid of these ads!

40 Willys coupe build.

Sort By: Custom

Sort By...

Filters

Type Filters

Brought the car home in the back of my pickup. My wife was less than pleased. She wondered where the rest of the car was.
41GASSER

41GASSER

40 Willys coupe build.

Brought the car home in the back of my pickup. My wife was less than pleased. She wondered where the rest of the car was.

1
996
0
04 Dec 2012
Just starting the project. Car had no firewall, floor, trunk, door sills or trunk divider. Had just picked up the nose from rodcraft.
41GASSER

41GASSER

40 Willys coupe build.

Just starting the project. Car had no firewall, floor, trunk, door sills or trunk divider. Had just picked up the nose from rodcraft.

1
671
0
16 Apr 2012
Car when purchased was just a shell. No trunk or passengers compartment floors, firewall was cut back to A-pillar and plenty of rust.
41GASSER

41GASSER

40 Willys coupe build.

Car when purchased was just a shell. No trunk or passengers compartment floors, firewall was cut back to A-pillar and plenty of rust.

0
882
0
04 Dec 2012
Inner rear fender had been cut up by prior owner during his mock up. I chose to save and repair them. Lots of work on this one.
41GASSER

41GASSER

40 Willys coupe build.

Inner rear fender had been cut up by prior owner during his mock up. I chose to save and repair them. Lots of work on this one.

0
606
0
24 Mar 2017
Making the trunk floor and shrinking up the braces. I later added a battery tray in the center. I didn't have a slip roll so used the brake.
41GASSER

41GASSER

40 Willys coupe build.

Making the trunk floor and shrinking up the braces. I later added a battery tray in the center. I didn't have a slip roll so used the brake.

1
638
0
23 Dec 2011
Squaring things up and tacking in the body mounts I fabricated. This is a Morrison 2X4 4-link chassis and a Ford 9 inch rear. Running 35 spline axles and a detroit locker in a Strange pro-iron center section
41GASSER

41GASSER

40 Willys coupe build.

Squaring things up and tacking in the body mounts I fabricated. This is a Morrison 2X4 4-link chassis and a Ford 9 inch rear. Running 35 spline axles and a detroit locker in a Strange pro-iron center section

1
1K
0
02 Oct 2009
Tubs cut out and getting trunk floor fitted and tail panel welded in.
41GASSER

41GASSER

40 Willys coupe build.

Tubs cut out and getting trunk floor fitted and tail panel welded in.

0
676
0
25 Nov 2012
Getting started on the tubs.
41GASSER

41GASSER

40 Willys coupe build.

Getting started on the tubs.

0
642
0
29 Aug 2009
I moved the original wheel tubs in several inches to fit the M/T tires I selected. I fabricated a new trunk floor to contour the frame rails.
41GASSER

41GASSER

40 Willys coupe build.

I moved the original wheel tubs in several inches to fit the M/T tires I selected. I fabricated a new trunk floor to contour the frame rails.

1
729
0
29 Aug 2009
41GASSER, Aug 29, 2009
Page 1 of 16
    There are no comments to display.
Register now to get rid of these ads!
Top

Archive

Support

Support The Jalopy Journal - Contact Us - Log In

Subscribe

By Email - RSS
-
Our Affiliate Link Policy

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.