Site Links Affiliated by Skimlinks.
Register now to get rid of these ads!

My Main Shop (I have two!)

Here are some pictures of my garage shop. I am still gathering parts for a car build, so I am working on getting the shop ready while I wait. Latest pictures always at this link: https://drive.g

Sort By: Date

Sort By...

Filters

Type Filters

20130808 Gray Shop 0036 Fabrication bench. Welded steel frame to suspend Snap-On middle box. Gray cabinet on wall will be painted to match the bench.
Sergeant82d

Sergeant82d

My Main Shop (I have two!)

20130808 Gray Shop 0036 Fabrication bench. Welded steel frame to suspend Snap-On middle box. Gray cabinet on wall will be painted to match the bench.

0
449
0
24 Aug 2013
20130808 Gray Shop 0035 Welding cart & cheap POS welder were given to me... It took a lot of adjustment to get any kind of decent weld out of it, but now it at least slightly works. O/A Torch & *good* welder on the short list of procurements... Along with a good heavy steel welding table.
Sergeant82d

Sergeant82d

My Main Shop (I have two!)

20130808 Gray Shop 0035 Welding cart & cheap POS welder were given to me... It took a lot of adjustment to get any kind of decent weld out of it, but now it at least slightly works. O/A Torch & *good* welder on the short list of procurements... Along with a good heavy steel welding table.

0
444
0
24 Aug 2013
20130808 Gray Shop 0034 Two outlet box on each end of the cabinet. Twenty foot cord reduces clutter.
Sergeant82d

Sergeant82d

My Main Shop (I have two!)

20130808 Gray Shop 0034 Two outlet box on each end of the cabinet. Twenty foot cord reduces clutter.

0
451
0
24 Aug 2013
20130808 Gray Shop 0033 Top surface of cutoff saw/grinder workstation has four coats of the epoxy floor paint. Middle section inset to make the saw surface level with the rest of it, to support the work stock. Power cords for grinder and saw run through top surface to outlet inside the cabinet. No loose wires!
Sergeant82d

Sergeant82d

My Main Shop (I have two!)

20130808 Gray Shop 0033 Top surface of cutoff saw/grinder workstation has four coats of the epoxy floor paint. Middle section inset to make the saw surface level with the rest of it, to support the work stock. Power cords for grinder and saw run through top surface to outlet inside the cabinet. No loose wires!

0
485
0
24 Aug 2013
20130808 Gray Shop 0032 Consumables.
Sergeant82d

Sergeant82d

My Main Shop (I have two!)

20130808 Gray Shop 0032 Consumables.

0
454
0
24 Aug 2013
20130808 Gray Shop 0031 Painting stuff.
Sergeant82d

Sergeant82d

My Main Shop (I have two!)

20130808 Gray Shop 0031 Painting stuff.

0
465
0
24 Aug 2013
20130808 Gray Shop 0030 Jackstands are on Army Surplus metal bookshelves which I painted to match. More old kitchen cabinets.
Sergeant82d

Sergeant82d

My Main Shop (I have two!)

20130808 Gray Shop 0030 Jackstands are on Army Surplus metal bookshelves which I painted to match. More old kitchen cabinets.

0
451
0
24 Aug 2013
20130808 Gray Shop 0029 Pegboard behind the parts bin. I try to keep the most common tools - at least hammers, screwdrivers & pliers - at each major work area.
Sergeant82d

Sergeant82d

My Main Shop (I have two!)

20130808 Gray Shop 0029 Pegboard behind the parts bin. I try to keep the most common tools - at least hammers, screwdrivers & pliers - at each major work area.

0
476
0
24 Aug 2013
20130808 Gray Shop 0028 Modular parts bin racks from Uline (Akro Mills parts) Uprights are one inch square tubing drilled to match, with benchtop brackets bolted to 2x4 base with cast iron casters. Eventually there will be six panels mounted to the uprights, three on front & three more on back, along with extra bins to fill up the panels.
Sergeant82d

Sergeant82d

My Main Shop (I have two!)

20130808 Gray Shop 0028 Modular parts bin racks from Uline (Akro Mills parts) Uprights are one inch square tubing drilled to match, with benchtop brackets bolted to 2x4 base with cast iron casters. Eventually there will be six panels mounted to the uprights, three on front & three more on back, along with extra bins to fill up the panels.

0
449
0
24 Aug 2013
Sergeant82d, Aug 13, 2013
Page 1 of 4
    There are no comments to display.
Register now to get rid of these ads!
Top

Archive

Support

Support The Jalopy Journal - Contact Us - Log In

Subscribe

By Email - RSS
-
Our Affiliate Link Policy

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.